Can u slow it down and show me exactly where the egr valve is at?!! Plz?!
@beatman30383 ай бұрын
How did u remove that line on the top left corner of the video
@PSOMOB4 ай бұрын
Where are you located will you do this for me for a price $?
@azvidz57114 ай бұрын
Hello, I was wondering if you could help me or give me some pointers to try and fix this light issue I have. I got the OmniPL retrofit kit and installed it on my ProLogic panel and everything works great except the lights… when I turn them on they turn on for about 10 seconds then they turn off and stay off. I tried different shows, fixed lights, modes (UCL, CL 4.0 etc) and it does the same thing. What could be causing this? I followed the instructions to a T. Also, when the lights turn on they always turn on to a dark violet/pink color and nothing else, I hit red, blue, green, white and none work… only the violet/pink color. Also, my lights are ColorLogic 4.0. 2 pool lights and 2 spa lights, appear to be all wired to the same relay. Any help/advice is greatly appreciated. Thank you
@joshjones2874 ай бұрын
What year?
@barryhadar44865 ай бұрын
What’s the name of that boat the new one and how much it cost?
@5150_JCT6 ай бұрын
Worst video ever. Stick to the point
@hectorvega21636 ай бұрын
Good video series.😊
@rickduran53027 ай бұрын
So it’s just better to buy a whole new housing?
@Budweiser-jh9uj7 ай бұрын
Was this on a 5.7?
@spke5328 ай бұрын
Does this kit come with the transformer?
@azvidz57114 ай бұрын
No I believe you have to but your own unless you have a ProLogic or an old panel that already has one.
@rasmondjr68859 ай бұрын
great information what were your symptoms
@stevenschrock9 ай бұрын
For the record today is Wednesday November 21st 2023 and the light is still out and no problem passing inspection…so for a 2005 dodge 4.7 v8 bought brand new to date I’ve only had to reply one a/c blower motor and it was about 50 bucks one 02 sensor which was like 20 bucks and one egr valve that was about 50 bucks …so 120.00 dollars is all I’ve had to put in to this dodge Durango in like 18 years …so it’s safe to say for a suv it was a good choice
@michaelvitiello99609 ай бұрын
Thank you for pulling the camera back to show me that you took your cowl panel off. I was wondering if that would make it easier and it looks like its a "yes"
@stevenschrock11 ай бұрын
Yep and it’s going on 150,000 now and the a/c is still pumping all original other than I replaced the blower motor …Texas Humidity
@richardchavarria8153 Жыл бұрын
Hi thanks for posting. Were you getting a P0058 error code?
@korynta Жыл бұрын
Can't hear you or understand half of what you're even saying. Between your heavy breathing and all the other clanking around, I don't know which is worse. Just my .02
@cyborg1117 Жыл бұрын
thanks alot, i installed my omniPL a few days ago and you are correct, my color logic 4.0 worked fine as soon as i got the PL system up and running, easy replace for my old aquaplus, Love the system, nice on the phone with wifi. I put a new transformer in also ,just to have everything new as mine was 8 years old, and looked a little burnt. Thanks for all your help, and you are right love this new omniPL.
@cyborg1117 Жыл бұрын
HI, can you answer a question for me please? I have the hayward colorlogic 4.0 lights 2 of them, one at each end of pool. I have the aquaplus controller , it controls my lights now, in the omniPL instructions it says (If the control is using networked colorlogic lights, the lights must be put into "standalone(default) mode before disconnecting the control). Or do you know if i would have to do this? Been looking everywhere. Oh by the way nice video, thanks for doing this. helped out alot!!
@stevenschrock Жыл бұрын
Once you switch to OmniPl your remotes should be obsolete and the new OmniPl has a sync lights option …I have a Jacuzzi color logic light that has been going for 18 years and just bought a new Pool Color logic 2 years ago and because my old board was already dead “ I smoked it!!!“intentionally “ I was done with the Aqua Logic 😁 so I did all my upgrade from breakers off and the uninstall Aqua logic board to install new OmniPl upgrade kit so it’s possible that you can go into stand alone mode but when you kill the power and switch boards and turn the breakers on and go online ..the lights should automatically go to there start up syncing like out of the box…I just put my Jacuzzis light wiring with my pool lights together and they both come on together…but if you want duel capabilities you would have to go to a separate line as in mine is a PS8 so I have 8 lines as you can see in the vid I don’t even use them all ..I hope this helped …but I remember when I installed my pool light I just killed the breakers and put in the new one and turned it on .. but ya on my Aqua logic I had spa light and pool light ..but I just ran them together on the same line so the sync the same light shows..
@kadenking5090 Жыл бұрын
Damn bro your 05 is way different than my 07
@regford3572 Жыл бұрын
THAAAAAANNKKKK YOU!!!
@Follows_Jesus Жыл бұрын
Thanks for the video bro. Much needed
@carlmaro Жыл бұрын
Thank you for posting this video. My 2011 has the same stains on top of my transmission housing. Is that where you leak was from?
@danielkohler3458 Жыл бұрын
Dude! You're crackin me up. You seem like a good friend to have a beer with. Anyway, thanks for taking the time to make these. I'll be referencing em this week later when I do my PL upgrade for the same reasons.
@FOURsCRUZ Жыл бұрын
Holy shit bro I was looking for egr tube and I was wait a dam minute 🤔 why the fuck does it look like he has so much space to work with? Then I realized u took all shit off😱. I know u were not trying to do all just for the egr🤣. I manage to replace my EGR without removing all those extra stuff and sucked. Good shit man.
@user-el5pj5np1x Жыл бұрын
You showed 2 nds of where it's at and not how you got to the bolts. Real helpful... Stupid video
@jaredbueno2846 Жыл бұрын
Fuck I'm bout to do this shit rn
@carlmaro Жыл бұрын
Jared. Did you ever do your housing job. ?
@jaredbueno2846 Жыл бұрын
@carlmaro yup got everything from the bottom side I used a bunch of 1/4 extensions for the mounting bolts. Was hell cleaning the mating surface because last guy used silicone
@mayken6661 Жыл бұрын
Sounds nice. I think I’m the only one who’s EGR has T45 bolts . Son of a B***h .
@leothetowguy8 ай бұрын
Same and one stripped for me fun fun too now the get out process
@mayken6661 Жыл бұрын
Your egr have the T40’s ?
@stevenschrock Жыл бұрын
I think your asking about what I called Star Gears but yes it look like T40s
@stevenschrock Жыл бұрын
Oh but not the EGR valve itself just the cover that goes over the windshield and wiper assembly had T40s...They were 8 mil and 10mil bolts that held the egr and breather pipe on
@stevenschrock Жыл бұрын
If your watching this ..I programmed it in and it is a dynamite system ..I will do more vids ..we had to put a new deck in and cut the manifold for all new valves ..but it’s a killer new board
@stevenschrock Жыл бұрын
Also check the installation video I did on the egr valve and show that bottom gasket down and in place ...people tinker and talk chit about removal but they never show you how it goes back together and if the light went off and stayed off...and yes it’s still off
@stevenschrock Жыл бұрын
Hey guys if you look on the rest of the Vids ...you can see that those bolts were rusted in there good and the breaker bar was also to help stay level as you tork insuring not to strip or break the bolt
@auto8z Жыл бұрын
Какой слой защиты нужно иметь чтобы защитить себя от радиации?
@stevenschrock Жыл бұрын
LOL
@stevenschrock Жыл бұрын
This video is the new thermostat housing assembly installed without the thermostat in yet ..it’s a three step process after you remove back plate sponge snap pins holding the wiring harness and some vacuum lines and covers to access back of motor ..The black backing plate and sponge slide down and to the left to remove them towards the the passenger side than remove bolt from radiator coolant line attached in thermostat housing assembly just let it drop do not remove ..Than unbolt thermostat housing assembly 3 bolts and take out with heater lines attached ...everything slide out to the left ...the bolts removed attached the radiator coolant line and heater lines are used to counterbalance for reinstall ..replace Gasket and O rings on all parts ...it can be done but no one would touch it ..there are a total of 12 bolts that get removed a 15 13 and 10 mil sockets with extension and swivel sockets needed ..I used a 3/4 inch plywood to lay on top of to make it more comfortable working from the top ... I wish I had videos the whole process but it took me three times to do as there were no vids yet to help but after just doing thermostat than heater gasket and O rings ... it is the black 1 1/2 inch approx.. O ring seal on the assembly that is on the inside of the thermostat housing assembly that was faulty...🤠
@stevenschrock Жыл бұрын
0:26
@stevenschrock Жыл бұрын
Type in 2012 Chevy Camaro or compatible..New Thermostat Housing Assembly in search engine and you will see the black O ring seal that is inside the housing...That is what is going bad on the V6 Camaro because it’s a race type engine and the design was Ingenious
@cutedoglilangel7994 жыл бұрын
Whippets always rob my heart ❤️ ❤️
@stevenschrock7 жыл бұрын
I find it simply amazing how people can troll world records without proof...we sought out all comparisons and found none this size... we should have called the Texas State records but he said dad the record didn't mean that much it was a blessing to catch one with a light test and release it back to make bigger ones for the next generation to enjoy to catch......post pics and proof before commenting or a video of you!!! Not someone else ...This is a secret spot just off the Trinity river ...you have to hike miles in brush just to get there through snakes and bores ...your not on a boat sucking on beer
@stevenschrock7 жыл бұрын
Your dreaming where is the pic ...my son is the greatest Texas fisherman in the state ..he landed it without a bow...and he released it...it was 6' easy
@tommygresham93459 жыл бұрын
No record it's big but not huge I've caught 5 ft long nose and they wernt even state records
@tommygresham93459 жыл бұрын
@Alphamale-ht9tu9 жыл бұрын
I've caught one twice that size
@stevenschrock7 жыл бұрын
Alphamale1222 where is your pic ..we brought you live footage...your a poser man
@jariahsweeten673910 жыл бұрын
were did you get the windying wheels
@treycosper413611 жыл бұрын
Don't want to burst you bubble but that's not a world record. A giant? Most definitely, HOWEVER I have caught at least 3 longnose gar over 6 feet long and one weighed 68 pounds while striper fishing on Lake Murray in South Carolin. Great catch though!
@stevenschrock7 жыл бұрын
Trey Cosper where is the pic?
@davefish844 жыл бұрын
i would love to see a pics of your 68lbs longnose. that would blow the world record out of the water.
@willysoulbrotha11 жыл бұрын
Nice catch man what state is this in. That's a nice little spot it looks like a creek opens up into this pond
@allupnya10011 жыл бұрын
Good job as always Thank you Layne,
@robertsaavedra923811 жыл бұрын
Great Job there Steve..God Bless all and all the Families of the Tragedy..