mk2sixteen

Пікірлер

@timrocky_maplemtb4135 24 күн бұрын

Mines seized that much it’s snapped my breaker bar

@M18BTE Ай бұрын

can you tel me what size allan key is used to bolt the ring together please? going to attempt next week.

@evanleebodies 7 ай бұрын

Don't forget the hub nut!!

@p.munster9209 8 ай бұрын

Thank you for this video. It shows how quick and easy it can be done. I Ssupect one of my rear wheel bearings. I know now that I will do It my self. Thank you.

@evanleebodies 7 ай бұрын

Front and rear wheel bearings are not the same and use different methods for replacement (on VAG vehicles at least)

@Horbe_one 9 ай бұрын

Alguien de México que tenga esta herramienta y donde la consiguieron. Saludos.

@colincampbell2870 Жыл бұрын

Great video east to follow and understand thanx for this 👍🏻

@garywalker4392 Жыл бұрын

Thanks for the video, very helpful. I've been working on cars most of my life and it's "shit" like this that pisses me off! They like to reinvent the wheel, why change something for the sake of it, compelling you to buy yet another "special" tool! Oh and there isn't just one size, depending on your model! I just want to rewind 30 years, now you know why us old people are always f**king moaning!😂😂😂

@S7EVE_P Жыл бұрын

Great video. Straight to the point and full of useful tips. Thanks for sharing, really helped me with this job.

@theMCJ Жыл бұрын

How much extra work is it to do the wheel bearing change on the front wheel? Driveshaft etc?

@tangostalons5807 Жыл бұрын

Brilliant thank you

@discomonkey3492 Жыл бұрын

Don't use an impact gun - best advise ever!

@jesuswasachippiie Жыл бұрын

Are there any videos for the front?? Removing driveshafts etc etc

@theMCJ Жыл бұрын

I wanna know that too

@АлексейИванов-ц8ы8щ Жыл бұрын

огонь!!!

@soopsoopdawoooop5586 2 жыл бұрын

Is this for a 1993 eurovan MV>?

@jorgesitja 2 жыл бұрын

What tools Is? Modelo ?

@pancho.botitas611 2 жыл бұрын

Atte. Un Mexicano. Cabron. Huehuetoca Estado de México STA Teresa 3 bis 83

@pancho.botitas611 2 жыл бұрын

Muy profesional con tus herramientas especiales,,. Y tú seguridad pendejo Una torre para que descanses el gato o algo así. Le confías tu seguridad a un gato pues que pendejo de nada sirve que tengas las mejores herramientas si no tienes conocimiento de la seguridad idiota

@Stevenbobs2011 2 жыл бұрын

Have you a recent link to the kit you used as the old link no longer works. Many Thanks.

@bobbyg5904 2 жыл бұрын

if you do the front folks, you dont have the wee knobbly bits to line up on the black and silver rings . also, you need to split lower ball joint and drop drive shaft out

@karlwelsh1923 2 жыл бұрын

Star

@NealyLL 2 жыл бұрын

👌👏👏👏 perfect mate. Thanks for loading up 👍

@lb_abz8234 3 жыл бұрын

why is it that my bearing wouldnt come out when we but the long bolt in

@tigertankdestroyer1599 3 жыл бұрын

Just used the kit but never herd a click but no clips protruding all flush is this OK.

@vlogjoaofreire9182 3 жыл бұрын

Sou mecânico vivo em Angola!

@dialog245 3 жыл бұрын

******CAUTION.***** A few people including me have kits that use the opposite colours for the clamshell plates (SILVER to remove and BLACK to install), my kit was like this but came with no instruction so by following your video caused me to bend the install plates and break the clip on the bearing. I now need a new b earring and another kit. Can you 'pin' a comment to to warn people of this or edit your video to warn people that their clamshells may differ in colour.

@madbrit5053 3 жыл бұрын

you only need the black and brown, then swap them over to reverse action

@liamhalsey9875 3 жыл бұрын

Dogshit

@ryanbazeley153 3 жыл бұрын

Mine sure as shit didn’t go like this - pulled the threads off the main shaft 😲

@davidsoulsby1351 3 жыл бұрын

Do you have to remove the drive shaft and if you do how do I do it thanks

@danielfarn5827 2 жыл бұрын

Yeh my thoughts too why no answers?

@davidsoulsby1351 2 жыл бұрын

@@danielfarn5827 yes you do I took mine to the garage

@thekeeperob 3 жыл бұрын

Thanks for the video!! You made it look easy, i will be doing my volvo this weekend :D when the GEN 2 tool arrives

@frantisekkmotrik5063 3 жыл бұрын

Thanks 😉

@243fliptop 3 жыл бұрын

Be very careful folks .. my kit had the chromed back plates the other way round as in for the removal not re fitting and I nearly made a huge mess...

@joshaboshercarter6007 3 жыл бұрын

Hi all just a quick note, I watched your video and must say what a great help it was. I have the same kit, I thought how ever I broke the bolt trying to get the bearing out. The reason being I used the black plates to remove like you and after breaking the bolt I realised this was wrong in my set!!! I then got a new bolt and swapped to the silver set of pullers and the bearing came out as easy as that. Just thought I would let you all know, just worth checking before you start.

@augunkarlsen5901 2 жыл бұрын

Saved my bolt. Thanks man!

@NealyLL 2 жыл бұрын

Goodman , thanks for info 👌👏👍

@ilysionTV 6 ай бұрын

I was already using like 2m pipe and it didn't move, came here again just in case and thankfully also saved my bolt. Many thanks!

@oliverrice8869 3 ай бұрын

Not all heroes wear capes.. but you sir have just saved me. I’ve just spent an hour trying to remove it, with no avail. Thanks to your comment I’ve now just realised I’ve used the wrong ring.

@craigjowitt2578 2 ай бұрын

wish I had read this before taking the rear arm off and putting it in the press. could get my head around why at 12 tonnes on the press it wouldn't come out :D :D

@agj.7331 3 жыл бұрын

Well !..

@goodfeellife 3 жыл бұрын

Thanhx for your video.Ready😀

@ЭманиджянМигран 3 жыл бұрын

А можно размер впресовки

@dangirard4519 3 жыл бұрын

What wires were you using to test with? Brown and gray twisted together and the black wire?

@Beliefisthedeathofintellect 3 жыл бұрын

Seems nuts that is all that holds!!

@miguel24568 4 жыл бұрын

Cómo sellama la herramienta

@sirodayna9987 4 жыл бұрын

رائع

@Phate2323 4 жыл бұрын

I’ve been in the trade 20 years mostly on Vauxhall’s and now have moved to VAG stuff. I’ve used this tool for the first time last week but was changing the whole hub assembly and bearing so used it on the bench. It’s actually quite a good idea. Do they come out all the time of have you had any seized and had to resort to a press?. Great video 👍🏼

@mk2sixteen 3 жыл бұрын

I have had two stuck ones both on nearside rear . Thats when you just have to bite the bullet and pull the radius arm and press it out using the cradle from this kit. It was only stuck as I could not exert enough pressure by hand. Both stuck ones popped straight out with 5 or 6 tons on it. Other than those 2 they have all been like you see here.

@mk2sixteen 9 ай бұрын

I've not had to resort to a press as yet and yes I've had a few really fight me but the kits got it every time. I've seen bearings unseat soon after being fitted by others mainly because the clipped spring plate was not seated correctly due to a dirty rebate. This can be prevented with cleaning it thoroughly and just very gently prizing the clips ever so slightly out a bit further to ensure good solid location.

@spudtrainspotting9149 4 жыл бұрын

Top bananna 👍

@automaxwellenvideo6311 4 жыл бұрын

Hola , excelente video , en que otros vehículos se usa tu herramienta , gracias

@mk2sixteen 9 ай бұрын

It's used on any gen 2 bearing although sizes differ from car to car. IIRC this kits used on VW Touareg and Porsche Cayenne 2003-2010

@tricahya9152 4 жыл бұрын

what special tools used?what is the tools called?txz u

@mondmenschen 4 жыл бұрын

Very nice.

@davidsoulsby1351 4 жыл бұрын

will the puller remove the hub on a 2005 vw touareg 2.5 tdi rear left

@mk2sixteen 4 жыл бұрын

The vehicle has gen2 85mm bearings the same as the T5 so yes it does.

@davidsoulsby1351 4 жыл бұрын

can you send me the model number of your puller please the firm who sells them say its only for front wheel drive and front hubs only also the bearing is fixed to the hub with abs ring does it remove complete unit on the left rear thanks

@mk2sixteen 4 жыл бұрын

Its readily available on ebay. Many companies make them. www.ebay.co.uk/itm/293615028111

@mk2sixteen 4 жыл бұрын

I choose to remove the abs sensor as the reluctor ring is inside the bearing itself. If yours doesn't come out as easily as mine did you could leave it there but I'm not sure if the besring damages it on removal. The bearing removal procedure is the same for front wheels as for rears or any driven wheels (syncro) except you need to remove the driveshaft also.

@davidsoulsby1351 4 жыл бұрын

@@mk2sixteen thanks ive got abs trackion control and brake assist lights on rear wheels locking up when I put lock on ive changed the wheel speed sensor still got lights on their was bits of black flaking paint and bits of black rubber inside the bearing when I looked down the hole where the wheel speed sensor goes in I'm thinking it must be the bearing thanks mate