Thank you!!! Your style and paced video is perfect!
@Corysdiyauto9 сағат бұрын
I appreciate that! Thank you.
@cmmartti4 сағат бұрын
@@Corysdiyauto I liked that you showed the full re-assembly process. So many tutorials leave you dead in the water by saying "assembly is simply the reverse of removal" when there's always more to it than that.
@Corysdiyauto4 сағат бұрын
Thank you!
@MiizzyN3 күн бұрын
Great video, help me with my 2016! Shop wanted to charge me 4.5 hours labour for this!
@Corysdiyauto3 күн бұрын
It helps to do the work yourself. I'm glad that you found the video helpful. Thanks!
@treadlightly69995 күн бұрын
Torque specs Tighten the 4 fuel injection bolts to 20 Nm (15 lb ft) Tighten the 4 fuel injection fuel feed pipe nuts to 25 Nm (18 lb ft) Tighten the 4 fuel injection fuel feed pipe nuts to fuel rail to 19 Nm (14 lb ft).
@Corysdiyauto5 күн бұрын
Thank you very much for adding this information.
@pistabx5 күн бұрын
thanks
@pistabx5 күн бұрын
thanks
@BilalAhmed-ye9qo6 күн бұрын
Excellent.. thanks
6 күн бұрын
Thank you for including the socket sizes , going to change my wife’s oil and I like to have the tools I need at hand
@Corysdiyauto6 күн бұрын
You're welcome and good luck with the oil change.
@TheRealMasterGrow6 күн бұрын
Well done, but I think pinning the cable out rather than bending it is a better solution
@cmmartti4 сағат бұрын
That would mean modifying the wiring harness. Even if the pin breaks, a new switch is $5 at any scrap yard, or $50 new, and takes seconds to swap.
@vampir3357 күн бұрын
Did you drain some coolant from the radiator before doing this? I see in other videos they drain the radiator underneath and then start working, some drain coolant from EGR cooler and oil cooler.
@Corysdiyauto7 күн бұрын
No, I didn't drain any coolant. You can drain some first if you want. It wouldn't be as messy.
@hugosanchez15438 күн бұрын
Hey did you have to buy the warning cancelling capacitors that the website offers for the lights ?
@Corysdiyauto7 күн бұрын
No I didn't. I never got any warnings either.
@annawest22149 күн бұрын
Do you recommend any other brands (besides AC DELCO) with easy installation?
@Corysdiyauto9 күн бұрын
I think Trico makes a good blade that's easy to install. The silicone blades last a long time compared to the traditional rubber. I know that they're more expensive, but I think it's worth it.
@Anavllama9 күн бұрын
Excellent close up to the tricky bits, good lighting good focus, others I found were lacking, this was perfect.
@Corysdiyauto9 күн бұрын
Thank you so much
@charlesbooker51409 күн бұрын
Thank you for this video. It was very helpful.
@Corysdiyauto9 күн бұрын
Glad you liked it.
@aaronnicholas54779 күн бұрын
Nice video. Having a hard time finding any replacement blades that fit that are not OEM.
@Corysdiyauto9 күн бұрын
Thanks. Yeah, they're not a common blade style unfortunately.
@JoaoLima-vl5ut9 күн бұрын
Thanks
@Corysdiyauto9 күн бұрын
Welcome
@willtoulan10 күн бұрын
Wait your supposed to have a hold down for the spair?? Mines just sitting in there
@Corysdiyauto10 күн бұрын
Yeah, it keeps the spare from bouncing around.
@willtoulan10 күн бұрын
Obviously I'm no automotive engineer but why on gods green earth do you need that many wires going to a headlight switch? 😅
@Corysdiyauto10 күн бұрын
Haha, German engineering.
@willtoulan10 күн бұрын
You consistently have some of the best videos on this model golf. Thank you for taking the time to make these. They are very useful!
@Corysdiyauto10 күн бұрын
Thank you. I appreciate it!
@ez595910 күн бұрын
Hey man,where i can get the USA style lights from your front bumper, i really want it ,i m from europe,can you give me some keywords how exatcly is called? Thank you
@Corysdiyauto10 күн бұрын
Are you talking about the side marker lights? I actually sprayed mine to give them that smoked look. Here are a set, but I don't know if they'll ship to Europe. Hopefully this helps. www.urotuning.com/products/mk4-oe-style-smoked-bumper-sidemarkers
@ez595910 күн бұрын
@@Corysdiyauto yes, and can you give me a tip where i can drive the wires , when I switch to city lights to turn it on?
@Corysdiyauto10 күн бұрын
The side marker lights should illuminate when you turn the switch to the city light position.
@ez595910 күн бұрын
@@Corysdiyauto thank you
@Corysdiyauto10 күн бұрын
You're welcome
@shlomogoldenstein34410 күн бұрын
I replaced mine and added ultra black gasket maker around it and it’s still leaking, I don’t get it. Only thing I could think of was the thermostat housing where the egr valve sits, but there would be coolant in the leak. I’m stumped
@Corysdiyauto10 күн бұрын
If you're 100% sure that the oil isn't leaking from that plug, then it could possibly be your VTEC solenoid seal that's bad. I don't know if you have a VTEC model Civic or not though. Just a thought.
@Sedonalegendhelenfrye10 күн бұрын
Thanks, this is the most comprehensive removal video I have seen. That said, I replaced one of these before, and now, after many years I can't for the life of me figure out how I did it with no video. I just know it was a bitc#... to do. I read one site which said that 2001 didn't have factory auto door locks, and that they were aftermarket. Uhhh, no, my 2001 Civic EX 2 dr came loaded with factory power door locks (purchased new in June of 2001). Thank you, have the door apart, but for the life of me couldn't figure out how to remove the darn thing, this will help! Your efforts in documenting this are appreciated! (be careful about breaking the plastic tabs holding the rods in, already broke one in being so careful, they are brittle. Now in the middle of a job I have to order a new one!) 😁
@Corysdiyauto10 күн бұрын
Thank you for commenting. I'm glad that you found the video helpful!
@vampir33512 күн бұрын
how many litres of coolant did you refill after the job? cause I saw a big spill there.
@Corysdiyauto12 күн бұрын
It's been awhile since I did this, so I actually don't remember. It wasn't that much though.
@theobviouscritic16 күн бұрын
Great video. Super straight forward.
@Corysdiyauto16 күн бұрын
Thank you
@davearthur109317 күн бұрын
Great Stuff. I have a leak as you described and a gasket kit on the way. This video has given me the confidence to proceed! Excellent job.
@Corysdiyauto17 күн бұрын
Thank you very much!
@vampir33517 күн бұрын
you dont need to flush the entire coolant for this fix right?
@Corysdiyauto17 күн бұрын
No you don't.
@sniperpaintcorrection679018 күн бұрын
My radiator fan just keeps going even when the car is off and not hot . Untill the battery dies. I have to unplug the fan while the battery is connected so it turns off . Is this caused by a faulty FCM? I feel like this just started after my coolant overflowed on it
@Corysdiyauto18 күн бұрын
That could definitely be the issue, yes.
@sniperpaintcorrection679018 күн бұрын
@@Corysdiyauto thank you. And one more question . I just changed the radiator yesterday and I have very little coolant leaking out the bottom mount screw where the rubbers go in at the bottom and the little pin that drops in .
@Corysdiyauto18 күн бұрын
@sniperpaintcorrection6790 - I've never replaced the radiator in mine, so I'm not sure why you'd have a leak unless it's a defective radiator?
@yamaha490218 күн бұрын
Install?
@Corysdiyauto18 күн бұрын
Install in reverse order of removal. I didn't create a video of that though.
@carshomediy18 күн бұрын
Nice!
@Corysdiyauto18 күн бұрын
Thanks!
@janneinkinen860118 күн бұрын
Hi! Thanks for the great and detailed instructions! I am up to this project on weekend. i had no change to obtain the safety bolt showed in your video (I only have the seal). I know a great disaster may follow if the head becomes completely off the pump. Would it be possible for you to measure the bolt so that I could utilise a bolt with same specs from a local shop? I really really would appreciate this and be grateful ever after.
@Corysdiyauto18 күн бұрын
The bolt is 55mm in length. Good luck with everything and take your time with it.
@forgottenknowledge891720 күн бұрын
I don't want Mexican parts on my German/Polish made Volkswagen Caddy.
@c.a.139422 күн бұрын
LIFE SAVER THANK YOU
@Corysdiyauto22 күн бұрын
You're welcome! Glad you found the video.
@pastoroscar608324 күн бұрын
Nice
@shawncarmody150024 күн бұрын
Thanks for posting this! Much appreciated.
@Corysdiyauto24 күн бұрын
You're welcome and thank you for the comment.
@marcichapman159225 күн бұрын
thank you thank you thank you!!
@Corysdiyauto25 күн бұрын
Glad I could help!
@E21Life27 күн бұрын
Thank you!
@Corysdiyauto27 күн бұрын
Welcome!
@user-dk2gc1ky5p27 күн бұрын
hello friend Octavia A4, the large fan works as expected, but the small one is silent, 12V works directly, the air conditioning compressor works but crashes due to the fact that the small fan does not work, the problem could also be in the fan control unit?
@Corysdiyauto27 күн бұрын
Yes, it could be the fan control module or a wiring issue.
@viamerda28 күн бұрын
if you would read the maintenance manual and know what you're doing you would understand the shorter bolt
@Corysdiyauto27 күн бұрын
Please explain
@michixinqq28 күн бұрын
hi, where do I find information on torque values that are necessary for the correct install of various bolts?
@Corysdiyauto28 күн бұрын
You can search online for the torque specs. There's a wide variety of information out there for these cars. You can also get a Bentley service manual which includes the torque specs.
@charlessmith93328 күн бұрын
My tank sensor for fluid level is bad where is it located thanks
@Corysdiyauto28 күн бұрын
It's part of the def tank heater. You'll have to replace that unit as I did in this video: kzbin.info/www/bejne/gH-ziYNth7aYsNk
@charlessmith93328 күн бұрын
My tank must be bad tank full says need to add fluid where is that sensor located thanks great video
@charlessmith93328 күн бұрын
After replacing it all did you start driving immediately or did you have to get it to regenerate if so how mine has been parked for 1.5 years and now I’m going to do this thanks
@Corysdiyauto28 күн бұрын
I started driving it immediately without any issues. The car wasn't sitting as long as yours though. Good luck with it!
@Jesus-hx5vg29 күн бұрын
Very satisfying to watch thanks
@mohandchennit903929 күн бұрын
Do you know how to change the temperature unit from F to C
@Corysdiyauto29 күн бұрын
I'm pretty sure that you are only able to change it if you have the premium display. The Jetta in this video has the basic display.
@mohandchennit903929 күн бұрын
@@Corysdiyauto I do have the basic display! Thanks
@michaelwelsh995729 күн бұрын
What about the smaller gear? I had 2.
@Corysdiyauto29 күн бұрын
I only ever dealt with the one as shown in the video.
@RROSCOE1Ай бұрын
Nice clear way to explain the oil change. Job well done!
@CorysdiyautoАй бұрын
Thank you!
@mataki329Ай бұрын
Я тоже хочу поставить такие на свой Golf mk4
@RogueChewbaccaАй бұрын
This is super helpful! I want to change it myself and was concerned about it being diesel. This seems fairly straightforward. Thank you!
@CorysdiyautoАй бұрын
Thank you. You can do it!
@82atwstillo64Ай бұрын
Where did you get those Ramp?
@CorysdiyautoАй бұрын
I have a link in the description for the ramps.
@BenjiizusАй бұрын
Awesome
@rickherrick1732Ай бұрын
Excellent video, thank you very much. Just picked up a 2023 from Carmax and the rear blade scrapes really hard on the window but doesn't scratch it. Took to the dealer and they were even a little confused so they are getting a rear blade only first. I will try to get the blade locally and do it myself thanks to your good work here.
@CorysdiyautoАй бұрын
Thank you for the comment. Hopefully a new rear blade is all you need. Good luck with it!