I'm honored that I was allowed to turn some wrenches with you at the old shop. Watching the shop grow and succed was very fulfilling . I'm proud of The Jeep Lab and what Marc is all about . 💪
@billywiggins518114 күн бұрын
the dealer replaced my first oil cooler one year later that started leaking so i changed the second with a aluminum one now that one is starting to leak but not as bad as the first one. i know i didnt it right whats the solution this time 20155 sport
@eramydelatorre51014 күн бұрын
Where did u get the led pods do you got the link ?
@solsticesounds79815 күн бұрын
I wouldn’t replace the sensors. If it’s not broke don’t fix it. I wouldn’t risk getting bad parts from stock. I’m in aviation and subscribe to the Mike Busch mentality.
@streamweaver675415 күн бұрын
So the heat shield is not necessary?
@boatingshow119 күн бұрын
Where to mount Mirrors when doors are off?
@TheJeepLab19 күн бұрын
On your half doors? Or a custom option if not running half doors
@Madmike90824 күн бұрын
Slave labor Chinese parts
@ralphderkapitaen987529 күн бұрын
I wonder if you came across the Mishimoto Aluminum Oil Filter Housing Kit and if Mishimoto is better than Doorman? I barely see/hear anybody talk about Mishimoto. The Kit does come with both sensors and with gaskets, so it's a complete kit
@rrickyrocket8Ай бұрын
Maximus 3 recovery and tow loops, adapters for blue ox and roadmaster without chance of scraping tow bar when 4 wheeling
@cindyandabitofeverythingАй бұрын
Awesome information! Thanks for sharing your knowledge with us beginners.
@ericblair8827Ай бұрын
Helpful, more light would be a good addition.
@SeleneSung-x2u2 ай бұрын
Hello! We are interested in what you have posted. We have some automotive related products. Do you accept sponsored products?
@Things2Delete2 ай бұрын
The 2015 JKU doesn't have the trim piece in the defrost vent location
@chriscase95622 ай бұрын
Ever use the 12v plug wires after the controller install? I have a sport with no rear plugs or power windows. I was thinking of using the 2 wires from the 12v plug in the front for plugs in the rear of the center console.
@davidrpadecky87343 ай бұрын
Thank-you for your info. It is very beneficial, and straight to the point.
@calvinhobbs17613 ай бұрын
Replaced the oil cooler this past March on my 2013 Sport JK, 2 weeks later had to replace the oil cooler on my wifes 2015 Rubicon Jk. Used the upgraded Doorman aluminum cooler and filter housing on both jeeps. Yesterday noticed the 2013 using a lot of oil, no blue smoke, no obvious leaks but puddled oil in the exhaust tips!! never a dull moment with Chrysler/Fiat products!!
@victorcuevas51793 ай бұрын
Mine leaks everything it rains. It positioned corrected so I don't know what else to do
@golferpro12414 ай бұрын
I have a 2016 Jeep Wrangler with 89,000. Mine just failed. The dealership just changed the “o” rings and the gasket. All good!
@joelpinedo4 ай бұрын
Can you do another video how to install the led lights
@TheJeepLab4 ай бұрын
Install as in wiring? Or mounting?
@joelpinedo4 ай бұрын
Wiring
@QuestWithMe4 ай бұрын
What size cube lights where those
@TheJeepLab4 ай бұрын
2x2
@cliffking12154 ай бұрын
I used the rock jock tow bar base plate with my rubicon steel bumper. I have the same warn winch with a rough country mounting plate, and it all bolted up nicely together. The rock jock tucks up tight rather than having something that looks like a snow plow mount
@andrewbloniarz2865 ай бұрын
That does it, I'll just custom build my own setup.
@luisyepez99045 ай бұрын
Hello. What are the spec's for the 2 sensors? I bought the Doorman but without them, and I would prefer not to deal with reusing any of that stuff. Thank you.
@mefobiajeep98665 ай бұрын
The Dorman heats the engine temp by up to 4 degrees being all aluminum. Also the updated Mopar unit has a new seal design on the cooler to housing surface and the Dorman uses the older "figure 8" seal design. Best option is the new OEM Mopar unit or just seals
@ralphderkapitaen987529 күн бұрын
yepp that's what I am thinking. Getting the new/upgraded Mopar OEM with their Mopar seals and get both Mopar sensors and do all Mopar. Probably the safest route. Many people blame the plastic housing, while the leaks might come from the seals. So even if i change it to Aluminum, the seals will still have issues later on. So alluminum doesnt fix anything. And if somebody has got cracks in the plastic housing, it's likely caused by overtorquing it during oil change, so rather user error.
@keithowens42255 ай бұрын
This video was great! Made it a lot easier. I had to take off a ground wire bolt but otherwise everything matched. One of my pin rods didn't really want to spin. Not sure if that is an issue.
Exactly what I needed to hear, suspected this was the problem on my wife's jeep that has a 3.5"lift and this confirmed my suspicions. Thanks!
@TheJeepLab6 ай бұрын
Awesome glad we could help!
@michaelquirke12816 ай бұрын
When you say that bumper is from a Rubicon, does it have to be a Gladiator Rubicon or will a Wrangler Rubicon fit the Gladiator also?
@TheJeepLab6 ай бұрын
They are the same
@michaelquirke12816 ай бұрын
Thanks
@carmscaffidi6 ай бұрын
Thanks for pointing out where the factory connector is!
@golferpro12416 ай бұрын
My dealer just replaced the seals, “O” rings on the old one. Replaced plenum gasket too. 2016 JKU 85,000 miles
@chegopal92157 ай бұрын
I have this and hate it😅
@dhandy2612 ай бұрын
Do you have the stock oem hood? Can you move it all the way open to the vicowl? Why do you hate it?
@JamesWigley-t2x7 ай бұрын
Does it come with a oil check valve
@TheJeepLab6 ай бұрын
No
@drwright20067 ай бұрын
2016 JKU 81K oil cooler just went out today. Thanks for the update.
@briandevoe7307 ай бұрын
Lake 👎
@RobertGeneretteIII8 ай бұрын
Wish I lived near your shop. I currently need a replacement plus got a (expletive) code p301 popping up.
@russellleboeuf86378 ай бұрын
looks great once installed. the cutting makes it permanent unfortunately. bit higher price too.
@jedmeltonmusic6988 ай бұрын
Spray the lines with penetrating oil, or spray grease, the clips have to to be pulled all the way out or it won’t come off.
@americancollegegrad37298 ай бұрын
What I haven’t seen explained is exactly HOW you know it’s bad. For example, I caught my torn boot right after it happened (lucky). In theory, I COULD just replace the boot, repack with grease, and put it back on, right? Any insights?
@TheJeepLab8 ай бұрын
The problem is that the angle is too severe, and that’s what causes the failure. So yes, you could put the same thing back on but you’re gonna have the same problem again you need to change the style of your driveshaft to compensate for the vehicle now being lifted.
@sipnscoot30498 ай бұрын
Ok. Cool. I’m at Carmax right now getting mine done on a 2015 Chrysler 200c 3.6 and since it’s with in the 90 days since I bought it, it’s being replaced for no money. So I’m hoping it’ll last awhile
@sipnscoot30498 ай бұрын
So is the new Mopar upgraded version holding up?
@TheJeepLab8 ай бұрын
None of the ones we’ve done doorman or oem has had issues, or the ones where we’ve just done seals
@earlscheib77547 ай бұрын
@@TheJeepLabare you doing the seals between the oil adapter housing and the oil cooler or just the orings between the housing and the block?
@TheJeepLab7 ай бұрын
@@earlscheib7754 all
@justinfox5558 ай бұрын
Worst company! Never responds. Always out of stock. What a joke!
@TheJeepLab8 ай бұрын
Yeah, they were on top of it. I don’t know what’s going on with them. I don’t know if they may be out of business.
@scotthantz34058 ай бұрын
My seals went bad. The oil passage o-ring was cooked
@tonyetheridge23988 ай бұрын
Replacing because of leaking ?
@luisespitia58459 ай бұрын
I have a 2013 Jeep wrangler Sahara that is leaking antifreeze and it is coming from oil cooler housing. I had the oil cooler housing replaced about a year ago. Are the aluminum better than the hard plastic?
@DremaShavers9 ай бұрын
Hey! I am from Suparee team. You got our Jeep cover right? Have you finished the video?
@zlightning9 ай бұрын
Doing a replacement on mine soon. Going with the dorman unit. If it leaks again I'll definitely check the seals.
@OttoByOgraffey9 ай бұрын
I wonder if an access hole could be made, under the seat and carpet? I did that on a Dodge Durango, and I had the pump out , with a full tank, in 20 minutes. Not lying.
@ethebarbersanchez4079 ай бұрын
Did you use an adjustable track bar for the front and rear after the lift? If not, why not or did it make any difference on the way it performs?
@jeffmeisterr9 ай бұрын
Change your oil on this plastic housing when the engine is cold. Plastic softens when hot the base will deform eventually by just removing the filter cap to change the filter.