Pleaze people, dont go messing with the traction battery. It can and will kill you. Great video for the average tinkerer/layman/DIY'er. Tbanks much. And loved the addition of the little bit of problem solving you did. Every little bit helps.

You don't clean the back?

Good luck on getting hot water for a shower. Also the display was showing KW power .6 would indicate 600 watt consumption for the frig.

​@cfldriven does wireless bridge mode allow you to put the router in any room because I'm planning on buying it for my room on my night stand for better speeds

They do not warranty there product !!!

I was having issues with mine going off line from too weak a wifi signal. Installed a wifi extender, reinstalled the water sensor, and problem solved.

Does this router have wireless bridge mode

I have had the same thought about the fact these need a switch. I think I might just give it a whirl. Thanks for sharing.

Unfortunately our water here, even though I have a water softener system, still has rust and calcium. I use the ice machine daily, so my gut tells me I have to keep buying them. What are your thoughts?

I had to add my issue with this induction stove. Mine is also 6 years old. It worked perfectly up until today. We had a pot boil over on the cook top. The element was on full power. It boiled over for a few minutes before we caught it. Maybe 12 oz of water boiled out. On top of the glass. I thought no problem. However as we used paper towels to soak it up we could hear water sizzling inside the cook top. Turns out the glass is not sealed water tight to the metal frame intermediately below the glass top. Water using surface tension leaked inside running along the underside of the glass top into the power control box. It shorted out the control box. Note we turned the stove off as soon as this happened. Yet those power wire leads that run into that power control box must be live full time. The water continued to sizzle and we could smell burned wiring. Until it went pop. Burned thru the wire at the short. The entire cook top is dead now. The controls still work just no heat. The oven still works. All 5 burners are dead. The replacement of that power control box costs $2,100. So people watch your cooking do not let anything boil over. If it does contain the spill immediately do not let it run over the edge of the glass. It will be a very expensive lesson. I would even put a towel around the edge of the cook top just as a safety measure. To stop any boil over from getting over the edge of the glass. It will save you 2,100 repair bill.

Excellent

If you heated the plastic, you could probably flatten the area the switch is in so it's not protruding each side. If not, perhaps glue the switch in from the back.

Isn't it Ironic that it's Al Jazeera reporting this when they have embedded terrorists within their organization ? smh No wonder vigilantism exists.

Nice work. My setup is a little different as I have connected the 12V car battery directly to a 12V 100Ah LiFoP04 battery and then connected to an inverter. For my needs, I feel it's a little more flexible as I can run a 12V fridge from the lithium battery and if required, I can relocate the lithium battery to wherever I need a power source. Perfect for camping and emergencies. Also I don't have a garage or off-street parking so, the car might not be next to the house to run an extension cord from inverter to a 240V appliance (I am in Australia).

Yep but don’t swallow. Swish through your mouth then brush your teeth normally

I’d like to see more about loading the line and bumping when you need more line.

Mine fried! yellow circuit board glue very common but there is a YT vid that’s shows precisely what happened to mine This water based yellow adhesive becomes caustic and conductive According to the vid And upon opening my ups after a Smokey failure I did find 3 areas of yellow glue turned brown, bubbled areas that had fused across the board, bummer

Great video Thanks a Lot!!!! ; it fixed mine model DGL 1201 W exact same disassemby procedure.

How can I identify if my jr45 jacks in my new home are set to T568A or T568B. I took a picture of one of them, but I can't tell anything from the picture. I ask this because I may have to re-do all of them (about 8 or 10) and I don't know how much spare ethernet cable I will have inside the wall. If it is not much, I have to be very careful when I wire the cables with a new and better jr45. Thank you.

My Samsung fridge doesn't seem to work without a filter installed. No water at all.

Thanks a lot. Helped me a lot

Thanks for sharing. Don't forget the lifetime guarantee! I love mine too!

Got a brand new battery installed after seeing low voltage from the diagnostic screen and having it tested at autozone. New battery is reading at 11.5v 😢 on the diagnostic screen so now I’m worried there’s something else going on with my car

I have samsung s10e and i have separately installed samsung voice recorder as my phone dont have that. I was recording many audios after installing. Today suddenly when i open voice recorder there are only 4 revordings present. All my other recordings are missing. There is no data even in trash. Plz help me with this

I've had this video camera since 2019. Only really using it since 2020. It is a fantastic video camera, I would very happily buy it again, so much so I'm considering buying another as a backup. Great piece of tech, would love an updared version but I don't see this happening because the tech has plateaued. It's literally as good as it gets and with Sony needing to protect their more premium range of camcorders, the AX53 is the only contender for now I think....almost 8 years since launch!

how do you edit video? what app do you use?

how to download latest version?

Thank you thank you thank you. Mission accomplished thanks to this great video.

Thanks for uploading this! It cut down on the time for me to get into my DLE1101W to replace the belt and went ahead and replaced the four rollers and idler pulley while I was at it.

Wanted more info on recording a program, moving the closed caption text to bottom of screen instead of middle & creating a favorite channel list. Liked that he went over every button & told it’s function

I bought the Tablo TV 4th generation DVR hoping it would be better than my15 yr old Channel Master. My Channel Master picked up more channels than the Tablo. Tablo's guide is better but that's about it. It seems more like a beta version rather than the finished product. I truly wish I would not have purchased it.

Good Demo and appraisel

Thanks for this. 👍

I've got a GREAT idea for all these Emergency radios: one of the radio bands should be TV audio so while you're sitting there powerless, at least you can listen to your favorite TV shows. EZ to design into these radios and worth every penny while you're sitting there doing nothing IMHO.

Love this paint. I recently did a second dresser, had a little left. Few weeks later I wanted to use little bit left to do just top on a large dresser. It got so think and hard to stir im wondering if I can add just a tiny bit water so I can work with it and finish dresser top. Don't know why it happened, few weeks ago I did whole dresser and it wasn't too thick.! Love this paint nantucket.

It looks like this receptacle can't be used with metallic surface mount boxes. I also noted that you could spin the wire, indicating the wire may be only clamped on one spot. Your "Shepard Hook" in the beginning of the video was backwards. Sorry, one more... If your house is wired with all #12 and in the late 1960's - early 1970's then it is likely aluminum wire, and clamp terminals in receptacles are not recommended. All that said, I have never used one of these outlets. I will buy one and test it out. Thanks for the video. Sorry for being such a sticker. My electricians always called these "BACK STAB" receptacles. I've seen many service calls through the years with back stab outlets. Lights flickering, and customers smelling smoke somewhere due to poor connections.

Next video, I burned the invertor/convertor in my Prius connecting 1000W invertor to the small 12V battery! The 12v invertor in the prius is calculated for the loads the car has on the 12V bus. You trying to pull 1000W from it will end in an expensive bill for invertor/convertor assy replacement. If you want to put an invertor in this car, you can find a DC to AC invertor that works in the voltage range of the prius traction battery and connect it and then you will have a true backup generator with your Prius. But just go and buy a cheap gasoline generator and just learn how to change oil and a spark plug.

I’m currently redoing my orange oak bathroom cabinets and I just finished my son‘s bedroom furniture in the licorice color and it turned out so good. My next project will be my kitchen cabinets. Love this paint.

pull the antenna all the way out

Since is for kitchen cabinets, have you tested for oil resistance?

Yo thanks for this, here I was thinking I was gonna have to take apart so much of my console and it'd be a huge pain. Put it off forever and ended up paying a mechanic to do it once, but it already loosened up so glad I found this video

I will say taking off the front panel on on the LG DLE 1101W doesn't work the same way at all, the dryer looks the same but the front panel and bulk head will not come apart to get to the 4 screws that hold the bulk head in place! Any information would be highly appreciated! Help

Thank you!

Does this allow testing of high end video coax like 12g-sdi with a F to BNC adapter?

I bought it. 2years ago, but now I found it does not work properly, the indicator always remind me that the water is full of tank, but there is no water in the tank.

I wonder what is the Prius cable gauge from DC-DC converter to the 12V battery? Did you check if that cable is rated for the current that you are pulling into the inverter?

Wish they had a wider color selection.

I wrap tape on the bottom cap, then vise grips to remove it. Works fine

don't see you show how to display channel list so one can create a favorites list ... have to do it with the old remote

May I ask - do you hear the fan running when you are using the induction cooktop?