A man after my own heart. OCD, and everything needs to look as factory as possible. Very nicely done, sir.
@landog59Ай бұрын
Very professional setup 👍
@shroomadventures79182 ай бұрын
Can you do a rumble tune with a non vet setup?
@AdrianoBoller5 ай бұрын
Remove cable white in box fusível
@AdrianoBoller5 ай бұрын
So I checked the air conditioning and what I noticed is in the electric motor at the front that there is a mini jerk when moving between the change from the electric motor to the combustion motor, it seems that this transition from one to the other has a small bad contact or wear. of a piece of equipment responsible for the exchange. I didn't find anything about how this exchange occurs, if you can check, that's the problem. I noticed that when you make this jerk and turn on the lights, there are problems with the panel or when opening the doors, probably due to the reset via the white cable from the fuse panel. In short, it is something between an electronic and a combustion engine. When the hybrid's batteries are charging normally, I cleaned the zinabre and is working perfectly after maintenance. And the 12v battery is new, I replaced it.
@Diesel_ftw5 ай бұрын
Excellent work! Love the setup. Good job
@rigsnrvs6 ай бұрын
Did you ever figure this out? I just installed the same Victron equipment and noticed the same issue.
@AverageOverlander6 ай бұрын
How's it holding up 3 years later?
@SRKTube8 ай бұрын
Samething is happening to my car i am in bad situation can't afford mechanic, please tell me how to fix it. I have financial issue with lots of problems
@redonkk9 ай бұрын
Do you leave the front and rear in high all the time, with the hubs unlocked?
@danclapper6269 ай бұрын
guess the creator doesn't reply anymore to old videos.
@danclapper6269 ай бұрын
Do you lose room under the cover and having the tank/toolbox? Like a dead space?
@danclapper6269 ай бұрын
Which cover is that, they have a variety on their website. I have a 24 GMC dually.
@danclapper62610 ай бұрын
Any updates on tank and toolbox? Do you miss having that bedspace before you got it installed?
@kevovernon10 ай бұрын
So no pressure gauge installed? You would have to use a manifold
@sfgiant7910 ай бұрын
Nice build..what size tires front and rear? If you have a link it would be greatly appreciated 🙏🏽
@marquegibson51211 ай бұрын
User error.
@stickbogart365711 ай бұрын
👍👍👍 I don’t know why so many people mountain air compressor in a dirty wet environment. I just don’t understand that I’m using. 4 VIAIR air compressors for my airhorns, and for my ability to air up a flat tire for me or somebody else. All of my equipment is not in the weather and it’s not in the water or the mud in the dirt. It takes me only seconds to remove one of the. 4 VIAIR air compressors if they fail for any reason or get worn out I don’t have to crawl underneath my truck to take something out that’s no longer working. I believe you prolong the life of anything if you keep it out of the dirt, the water and the heat from the freeway, if you do not mounted underneath of the truck. Keep in mind I own a 2022 Nissan frontier crew cab I have a 2.5 gallon air tank and I have. 4 VIAIR air compressors and a quarter inch manifold that route the air pressure to where I wanted to go and none of my equipment. All the electrical is in the dirt water or mud. Who wants to crawl underneath of a truck to service there? Air system not me
@xcntrk7511 ай бұрын
Most folks with real work trucks need their entire bed for hauling and capacity. Placing tanks and pumps in the bed eats up that precious space. Interior is out of the question due to excessive noise the pumps make. With a Frontier you probably don’t have to worry about these issues and therefore have plenty of room to mount in your passenger seat.
@stickbogart365711 ай бұрын
Thank you much for your input. I’ve always wanted an air compressor system for my pick up truck that has rapid recovery capability. The reason I put the system together is because there’s so many people out there on the freeway. They do not pay attention to what they’re doing. Usually they’re playing with the phone while driving down the road not staying in their own lane we all know what happens when your car gets wrecked. The value is diminished dramatically number one and number two it winds up in the shop to get repaired. It’s going to be there for a long period of time so I make sure that I have the ability to give them a loud wake up call to stay where they belong and away from my truck Also, it does not take me long to have 150 psi. I have run it up to 250 psi just to pressurize the system to make sure that it’s got no leaks Sometimes I use it to help others who have a flat tire and when I opened up the toolbox to connect my hose to inflate the tire, they are impressed with what they see The airhorns are in the grill you can’t see them unless you really look for them and I have them facing towards the ground. That way if I drive my truck through a car wash no water is going up inside of the airhorns I added another airline that goes up underneath the back of my truck so if I want, I can add a second set of air horns on the rear of my truck I’m sick of the stupidity on the freeway. That’s why I built the system that I put together .
@ddboring11 ай бұрын
Nice fabrication 👍
@arizonalifestylechannel2186 Жыл бұрын
How's that system working out almost 3 years latter? I want the 99 gallon for my F450.
@nickadams2951 Жыл бұрын
I wired my horn the same way
@CristianGonzalez-ey7dd Жыл бұрын
Don't be stressed just 12 volt battery
@blackpepe Жыл бұрын
now that 2 yr has past how do you feel about the tank and freedom fill system?
@Tmil1035 Жыл бұрын
How did your wire the solenoid?
@dennishazeltine7877 Жыл бұрын
Great video...I'm interested in this for my 22 F350 but I live in NH and I'm concerned about the winter months we have and this being able to with stand the salt and slush ??
@dfowens63 Жыл бұрын
Great video on the installation. Just the information I was looking for. I do have a question. With your fifth wheel trailer hooked up does the tool box lid easy to open to allow fueling?
@1mikeladd Жыл бұрын
Can I get the specs for your tank to order one. I have a 2022 Raptor with Retrax bed cover and this seems to be the perfect invention we all could use and need. Thanks.
@dennishazeltine7877 Жыл бұрын
I see people asking if your selling the bracket and am I to understand your selling the whole kit ? If so I'm very interested could you message me please, Thank you
@ChrisNichols-jn1zg Жыл бұрын
Not sure what I'm doing wrong with the wiring. Followed your instructions with wiring the relay without any luck. Regarding the solenoid, 85 or 86 goes to one of the solenoid wires and other solenoid wire is grounded, correct? Thanks!
@xcntrk75 Жыл бұрын
Follow the diagram on the relay housing. Sometimes different vendors switch the pin numbers around.
@ChrisNichols-jn1zg Жыл бұрын
@@xcntrk75 yes sir. The diagram on my relay is identical to your relay in the video. When I activate upfitter 1, I hear a high pitched sound from the relay and my factory horn still sounds when pushed. Maybe the relay is bad. Two wires from the solenoid, one connected to 87 and is the second solenoid wire grounded? Thanks a lot for your time.
@robertchatterton738 Жыл бұрын
I would of mounted the pod in the center console for easier access.
@LastHumanStanding Жыл бұрын
Great video and informative. Thank you.
@TheRoadTaken Жыл бұрын
Very nice. Do the rear wheels throw any debris onto the compressor or dust shield? I'm picturing riding my bike as a kid and the rear tire shooting water onto my backside of my pants.
@mattlenardson6567 Жыл бұрын
Great product and video but are you not scared that you should have a filter or you’ll always use it?
@vpnman Жыл бұрын
If you're still selling the mounting kit, would be interested. Couldn't find an email on your about page to make contact. Thanks!
@hypedmicdrop Жыл бұрын
My 2012 ct200h is also doing this but it is not flashing
@nachos4018 Жыл бұрын
Long video for nothing waste of time. Comments more useful, jumpstart your car
@twisttwister8254 Жыл бұрын
I have one. Best car ever
@hypedmicdrop Жыл бұрын
Agreed
@daveprather9960 Жыл бұрын
I wish I could find a bracket like this for sale or the CAD for it. Great fit and strong way to mount!
@edwardh1003 Жыл бұрын
Nice install. The splash guard on the bottom was a nice touch. How has the system held up to snow, moisture and dirt?
@earlthepearl8166 Жыл бұрын
How long is your truck bed?
@xcntrk75 Жыл бұрын
8' bed
@Jason-nt5gr Жыл бұрын
Great setup!
@LeadTechnicianIII2 жыл бұрын
I have The Chief on my car . I love it!
@jasonturcotte35322 жыл бұрын
Wolo the chief not supose to sound like this… Check my video if you want to hear what it supose to sound like
@daveprather9960 Жыл бұрын
Sounded good to me 😊
@billdearman83652 жыл бұрын
This guy obviously doesn’t understand how gravity feeds work, way more simple and I’ve never had a drop of diesel overflow or spill after 4 trucks with aux tanks.
@joaovictorf.carvalho4582 жыл бұрын
Hey, my motor is rated 24v 250w by its label, is that ok if I deliver 36v to it?
@3613jeremy Жыл бұрын
Ya that's what he has with the 3 batteries but it will wear out the motor faster but it's an easy mod but this video he's upgrading the motor
@russelmoore12052 жыл бұрын
What tune(r)
@anthonymoreno19302 жыл бұрын
Awesome 1 problem.. you didn’t mention the check valve .. so it wouldn’t overflow.. of course only mention what benefits you..
@xcntrk752 жыл бұрын
What check valve are you referring to? The fill system is integrated with the primary tank sending unit and will only fill the primary tank to 3/4 full then shutdown the transfer pump.