Do you even need to compress the piston ? I know sometimes it doesn’t decompress or am I wrong ?

Tribit sounds better. And smaller and has a lanyard

how do you start recording with your original voice

Was the voice AI generated? It sounded a bit robotic but pretty human at the same time!

Tribit Xsound Go

For the third time I took the window fan apart to remove the massive blackness that had acquired all over the white plastic frame and the whits plastic fan blades. All plastic parts were washed in the bathtub. What a mess. This time, one of the two motors had seized up, but it is back to normal after I serviced it. Overall I was fed up with the quick development of filth, and so back in time I had purchased a pair of 10" x 20 " x 1' air filters and strapped one to the window fan. It fit like a glove and thus was air tight at the edges. I am now using the second filter. The first filter turn pitch black after two months and 10 days of being put to use. So I was shocked at how filthy the air is here in Toronto Ontario Canada.

Does anyone know where I can get the ON/OFF 3 speeds switch for mine ?? Same as this video, mine is LASKO WindMachine 20". Thanks !

I have tribit x sound go

It doesn't even look dirty.

God damnit I broke my retainer. Any idea what I could use as an alternative?

Nice video. Good job Edward! The tool you used to compress the piston. does it have an adapter. Can you leave a link for it pls.

Xsound go: deep bass, rich vocals and balanced treble.

Good ❤️❤️

Wear a good pair of earphones, sound and base quality are on the tribit XsoundGo.

Thermal fuse or not this fan is no longer safe to operate. The overheating condition in the motor blew the fuse did you investigate the overheat condition and remedy that first

Final review is missing from video maker.. video maker should give their opinion

6W against 8W isn't exactly fair comparison. Higher wattage of course produce better sound, especially at higher sound levels. Is there anyone listening at low sound levels? For budget speakers as long as the wattage is labeled honestly, just choose the higher one at comparable price points. This is also true for mid priced speakers. The best brands are more expensive but surely have better performance. We get what we pay for.

Finally after so many reviews... I made my final decision... I'm going for a Tribit. Thanks for the comparison

11122

Why micro usb port on Soundcore 2 ? On their site with reviews people say that latest models have usb type-c already))

I think the Soundcore 3 is 16w same as the Tribit in this vid. Might be better to compare those. Price wise the Tribit is cheaper then the soundcore 3 though. Thank you I love comparison content like this. :)

Me quedo con el tribit, lo siento con mas cuerpo y mejores graves..

thinking of getting the GO (have a few Tribit products already) .. in this video the Go sounds "more full and .. 'robust' " in my view .. the Anker sounds good dont get me wrong but "thinner" to me

I think big sound on anker.. and smooth

بيش هاي السماعه

Thank you. This was very helpful.

I wish Lasko upgrades their motors for their fans so they would last longer.

How do you charge this thing?????

Lo que nadie sube es como cargarlo no tengo ni la menor idea ojala hicieran un video de como cargarlo yo tengo uno

The unlock button on my urn is very hard to activate. I am thinking of taking it apart to clean underneath. Looking from your tear down, it looks like even I take it all part I cannot get to the top button. 🙁

Okay, so when i took apart my fan, the ball thing that goes around the shaft ended up getting jammed so i pulled it out, do you know how to get it back in the little bracket its supposed to be in?

My fan just like this one control switch stop working

Love the initial sound effects....; )...I have the exact same fan, same problem. I will follow your wisdom and embrace the fan anew. Thanks for the detailed video.

Hi, do you have a linediagram for the motor wiring? ( thin wires going to the coils) I was disassembling it to clean the dirt, but unfortunately the wires got loose. I would appreciate it.

A minha está desregulada funciona por algumas horas e depois para. O que devo fazer se não encontro um Tecno no meu país? Parabéns pela explicação vídeo?

Had 2 wind machines that windings overheated and failed In last 4 years.This last one I pulled apart motor and found scorched winding around where thermal fuse was and ty-wraps were so deteriorated , they just fell off. There is a reason the thermal fuses open up ( > 115 c) . The windings overheating is not right. I have exact replacement fuse but would never run this fan unattended.

Link to where to buy the fuse>?

Does the thermal fuse disable the fan completely? Mine seems to get hot and then reduces the speed and will stay at that speed regardless of the switch setting. Seems like a straight forward fix

Got it all apart very easily.. accept can't get the blade off?? To get to the balloon string that has been pulled in?? Help please

My blade will not go back on I’ve jumped on the thing put wd40 in the middle done absolutely everything I can think of and it just won’t go on

That you so much for the informative video! Awesome and very thorough job and in real time. I have to service my Wind Machine as it stopped working, so the tear-down/reassemble shown in the video is SO helpful. As was the fuse replacement. I am suspecting it is my fan motor fuse as well. I would remind viewers that the cord also has a hidden non-serviceable fuse molded in the blue plug. Really really really VERY POOR design on Lasko's part! Most fans with a plug fuse make the fuse serviceable That fuse can blow and the fan will stop working. So before you assume it is the fan motor fuse, check for continuity between each plug blade and the switch end of the respective wire. Also, a bad capacitor (the square black thing attached to the motor) will cause the motor not to function. I have one question for the technician. It seems that the rotor was not rotating freely until the bearings were lubricated. The same thing happened to my fan. I found it not rotating and the rotor was hard to turn. I suspect this caused the motor to overheat and the thermal fuse to blow. Is this what happened to your fan? Another design flaw is the lack of any way to lube the rear bearings without total disassembly. A warning was the the fan seemed not to blow as hard as usual. SO if your wind machine seems to slow down, do not neglect it! It could cause motor failure.

So if the fan display no current then a new thermal fuse must be replaced to restart the fan remarkable 😢

I want to bypassed but scared cause I know basic,101 electricity I need to insulated was thinking of putting black tape

Thermal fuse happens when it overheated

When you bypassed without thermal fuse what did you use for insulation

Very clear & excellent video

I love fans, and I enjoyed watching this video. My sister just told me just yesterday that her send this exact same one stopped working so I’m gonna be going to get her fan to disassemble it and check it out and hopefully it will be that thermal fuse will be the issue.