Would love a walk around! Also any chance you are expanding the product line for FSJs?
@jakethebeersnob7 күн бұрын
3rd-sees! Do it Daryl! ✌️
@MrJugler7 күн бұрын
I second that walk--around request. That thing needs it's own OnlyFans page. 😂
@jefflopshire6117 күн бұрын
Full walk around please!
@zebulonpekrul-l8y9 күн бұрын
It looks like it should be paired with a sound system upgrade and exterior light package for a reduction in cost of time.
@patrickwoodco10 күн бұрын
Does the skid come with hardware? I don’t see any that came with mine.
@JcrOffroad8 күн бұрын
It does not, it reuses the factory nutstrip hardware.
@EscoMoneySniper12 күн бұрын
damb this didnt work on my xl the front doesnt have a place to screw on and its missing a front piece
@sinlab13 күн бұрын
will this work with the jcr tailgate reinforcement? Thinking of ditching my spare and going with this
@JcrOffroad12 күн бұрын
It could, but you would not need the tailgate reinforcement if you removed your spare tire.
@cvisconti456821 күн бұрын
I went to Jiffy Lube to have an oil change… It was taking a long time. I noticed when it looked like it was finished. The hood was down the one mechanic had a bolt in his hand. I asked him is everything OK? And mechanic said yes, they dread broncos because there’s 40 bolts they have to undo Doesn’t look like 40 only about 13 bolts I asked him if the bolt the mechanic was holding in his hand was to my car and they didn’t answer me… I don’t know why they would lie to me like this… But I’m gonna go back to Ford in two weeks for them to make sure all the bolts are back on that skid plate…
@Mauser196524 күн бұрын
Hearing the driver door close made me cringe as it reminded me I still need to install the 50mil Kilmat noise decoupler and 4mm Siless insulation in my front doors. I already did the roof, back quarters, rear doors, cargo area and under the rear seats. Under the rear seats is close to where the leaf springs and shocks are mounted. Wheel well area's are extremely solid, so I did not do those area's. Additional 5mm foam was installed on the trans/drive line tunnel as well. Floors and cargo area received 12mm foam matting topped off with floor liners and the carpeting and all that has been removed. From the rear cargo area to the lower firewall the floor was cleaned and had Herculiner bedliner as a base protection. As with most the backer board was removed and new headliner material was installed in my 4 liter powered '87 Pioneer.
@jfrazier3025 күн бұрын
I guess this replaces the Overland Rack with the side door panels?
@JcrOffroad22 күн бұрын
That is correct!
@TitoElDePlatino26 күн бұрын
Feel like those bolts might mess up the seal between the hardtop and back frame of the jeep
@user-ve5oz4rd4z27 күн бұрын
😍😍
@neilgwinn504528 күн бұрын
I finally got my panel installed today. Had a slight delay because I fell at KOA Pigeon Forge (they are NOT ADA compliant, by the way) and crushed my rib cage at Jeep Invasion last August. Throw in three broken legs into the mix ... Now, I am ready to install my CB & switch panel and hit the trails. Better prepared. BOTTOM LINE MY FAVORITE INSTALL OF MY 60+ YEARS OF JEEPING.
@wherestarget160728 күн бұрын
How well does this work if you have the frame stiffeners?
@JcrOffroad27 күн бұрын
They don't interfere with each other at all!
@wherestarget160727 күн бұрын
@@JcrOffroad So do the stiffeners first, then the gas shield is ok.
@richiec6569Ай бұрын
really nice looking. Glad I watched past the soft topper install to see that it does have brackets to install if you have trail rails.
@noworldorderАй бұрын
This is a great looking rack.
@JcrOffroadАй бұрын
Thanks!
@t-rexfamilyoutdoorfun.311Ай бұрын
I have these and cant find replacement lights as a bunch of led are out on mine. Any advice
@JcrOffroadАй бұрын
Super bright led dot com.
@anthonyradleАй бұрын
Will this rack interfere at all with the sunrider soft top functionality?
@JcrOffroadАй бұрын
It will likely rest on the fairing of the short rack when open, but shouldn't affect the overall function of the top.
@armandozamora9009Ай бұрын
Looks nice but too much work , definitely not DIY
@larry662Ай бұрын
He said after you drill double check your alignment. LoL too late at that point.
@steezy4wd564Ай бұрын
Didn’t find anything for a wj 😢
@EjayMenchavezАй бұрын
Assembling and attaching the rack is the easiest part! Getting to it is wild though. Thank you for showing me all of that. I think I like this size and shape more than the prinsu, this came at a perfect time!
@SolidSnake_177614 күн бұрын
I feel like it would be nice if car manufactures started adding mounting holes to the top of vehicles.
@EjayMenchavez14 күн бұрын
@@SolidSnake_1776 I agree, I'm pretty used to taking apart my maverick at this point so I'm really not that stressed by it.
@jaimelopez9903Ай бұрын
Useless af 😂
@brodgers1861Ай бұрын
17/32” drill bit? I can’t even find one of those😂
@bimmer3twenty52 ай бұрын
Max Dealson for president
@JT.MASTERFLEX2 ай бұрын
Would this fit 2024 models ?
@JcrOffroad2 ай бұрын
No, this is only designed to fit the 2011-2021 WK2 model.
@craigversetti57002 ай бұрын
Big fan of you guys but for this product on my JTR i had to choose another manufacturer due to not really having much storage room with these ones compared to ones i went with & i didn't want to remove my for panel or drill holes in it , i definitely understand the better securement of the nuts & bolts but using the factory bottom screws along with the metal clip/ bracket the others have & them seating down into the nets surround they are very secure and solid & are ABSOFUCKINGLUTELY mounted stronger than the others !!!Again i love my JCR products & your install videos , i still learned from this Video & it helped me in several ways so please keep it up your fan base is continuously growing !!!!
@jerrygreene71392 ай бұрын
Awesome looking product! I have the ford bed mat in my Maverick, would this interfere with mounting your bed front molle panel?
@JcrOffroad2 ай бұрын
You may need to trim the bed mat to go around the lower mounting brackets, but it should work just fine.
@Idle_Cerberus2 ай бұрын
Link to the actual rack?? I cant find it on the website
@JcrOffroad2 ай бұрын
Link: www.jcroffroad.com/product/XJRK.html
@Idle_Cerberus2 ай бұрын
@@JcrOffroad this is fir the current adventure rack, where is the modular one?? Did you guys discontinue it?
@JcrOffroad2 ай бұрын
Yes. Discontinued in 2019.
@GerardLadalardo2 ай бұрын
I have a 2023 Gladiator Mojave with factory installed lineX and hard tonneau cover, will your product fit my truck under tonneau cover?
@JcrOffroad2 ай бұрын
Yes, this molle panel is compatible with the Mopar Trifold tonneau cover.
@user-yj7ry1iq2u2 ай бұрын
What can I say about this legend, its still ways better than best Chinese cars.
@danielplavsic76422 ай бұрын
Great video of what to do with the sensors. That detail was not present in other companies’ install videos.
@liam30442 ай бұрын
Simple and to the point, I like it
@BirdDogOffRoadAdventures2 ай бұрын
You guys should really consider making an option that doesn’t require the molle panels
@ruvinicon2 ай бұрын
Dónde puedo obtener el instructivo. Sólo falta conocer de dónde partes a medir y qué medida es.
@parkerday24152 ай бұрын
Will this work for a 2023 JT? Also where can I buy the rotopaks that will fit this?
@JcrOffroad2 ай бұрын
Yes, it will fit a 2023 JT. You can purchase Rotopax directly on their website or from one of their distributors.
@Thrasher.52802 ай бұрын
It looks like the basket could clear a slant back top, is that correct?
@JcrOffroad2 ай бұрын
Correct, that's what we have on the Jeep in this video.
@Thrasher.52802 ай бұрын
@@JcrOffroad Exactly what I need thank you.
@brzoza0072 ай бұрын
Quality product. I’m excited to get one. Awesome instructions
@wheelerk20123 ай бұрын
Can the Fridge slide be taken out without being disassembled? You know, like if you need to use the floor space for something else, can you detach it from the floor and remove? Thanks.
@JcrOffroad3 ай бұрын
Yes, you can access the floor bolts by sliding the tray portion out.
@pvmcorp3 ай бұрын
Where do we get such a potato gun
@JcrOffroad3 ай бұрын
We'll never tell...
@pvmcorp3 ай бұрын
That’s g-a-why
@fantaseahorse46963 ай бұрын
You guys make gay shit now, what happened?
@JcrOffroad3 ай бұрын
It all began when Jeep culture became about buying the cheapest junk from China and collecting rubber bath toys. We do appreciate you checking out our newer products.
@UBRLND-X3 ай бұрын
Great install video. Just received my JL panel and installed it easy peazy. High quality fabrication, looks great, and got the job done
@IrvineFury3 ай бұрын
I didn't discover the Maverick Catalytic Converter Skid Plate existed until after the Floor Skid Plates were installed (since JCR's website doesn't present this as a standalone item in the Maverick compatible items - you only see it as a recommendation from the Floor Skid Plates). I have purchased this Maverick Catalytic Converter Skid Plate and should have seen a set of instructions for installing it if you have the JCR Floor Plates. I suspect I must remove or loosen up some of the JCR Floor Skid Plates to mount this Catalytic Converter Skid Plate.
@DJWarda3 ай бұрын
Will this same rack fit the JL?
@JcrOffroad3 ай бұрын
It will not.
@MissGabrielaAvila3 ай бұрын
Did you guys had a hard time clipping back the back panel? I had a hard time putting it back and the light is is not sitting well..its crocked 🫠 i want to cry and them theres air coming from the front but i also had a different molle panel that had me removed the brackets at the front but i ended up returning that molle and got the one from this video. Maybe i didnt place the front brackets at the correct height?😭😭😭
@JcrOffroad3 ай бұрын
Hello, If you're having an issue with your installation, we're here to help! Please contact us at [email protected]
@BoostedMaverick3 ай бұрын
I think it looks great. Do you do installation for customers
@JcrOffroad3 ай бұрын
We do not have an installation department at this time.
@anthonypelletier89843 ай бұрын
Thanks I found a fabrication shop that works on all kinds of high dollar stuff so he said he would work on my Maverick. I love your product and I wanna do completely underneath the front to back after I put my lift on it with tire size increase. 2024 Maverick Tremor XLT with Terrain paint. What color is the paint on yours. I can’t tell in the video if it’s a light gray or Terrain
@JcrOffroad3 ай бұрын
It’s called Snow cap I believe. It’s a light gray.
@JK-zi1rg4 ай бұрын
JCR makes great products, I did a whole XJ up with bumpers, swing outs, skid plates, everything. Just finished install on wife bronco. Wish I had a lift!
@cowlumbus4 ай бұрын
Did he really keep that wire for the 3rd brake light sticking out like that?!?!
@vanquish_engineering4 ай бұрын
Will this *work with the BESTOP Supertop?
@JcrOffroad4 ай бұрын
This is compatible with only the SofTopper brand only, and is not compatible with the Bestop Supertop.