Yes you are right, I put so much glue , about 3 times on inside and one out side , just to really reanforce it , this glue is very strong and creates a fix permanent bond, in the video i did not show all the gluing because it was boring and is time consuming, on the outside i had to sanded down and prepared for paint ,, thank you very much for your time watching
@apexlegends170Күн бұрын
Amigo me ayudas yo tengo uno casi igual y tiene una falla
@blingonitКүн бұрын
I will try, what is the fault?
@sleepwalker95652 күн бұрын
БАЛАЙКА !!!😂
@abhasmitra37914 күн бұрын
I have one of this but the cd player is not reading the cd please make a video of it repairing it
@blingonitКүн бұрын
Please try to clean the lens carefully, and maybe this video will help you kzbin.info/www/bejne/bV7FeH-OhrWGn6csi=SdxO0VcQsEnTUfpm
@alex.ann_der6 күн бұрын
Does it really sound like they say ? They don't look so impressive. Linear Power speakers by Pioneer are different.
@blingonitКүн бұрын
Sorry for delay, I have seen all the videos with gigatube on youtube including mine, and believe me none of them are recording the true sound, for a stereo system so small this is a monster, the bass is incredible you will hear it , the neighbours will hate you, the walls are vibrating, and all the cameras and phones including iphone 15 pro max will not record the deep bass that this system produces, i have a lot of hi-fi systems but this is my no1 on the list so far
@joserodriguez-wm3bm10 күн бұрын
new subscriber good job 💯💯💯💯💯💯💯
@blingonitКүн бұрын
Welcome!! And thank you very much
@antoniodacosta199111 күн бұрын
Bonjour, incroyable, mieux que celui d'origine.J'en ai un aussi, je vous en ai parlé il y a quelques mois quand vous avez commencé la réparation.Maleureusement, une des k7 ne fonctionne pas et j'ai démonté le cd pour le graisser en suivant votre vidéo et maintenant il ne lit plus les cd. je l'ai donné à réparer mais le réparateur n'a pas réussi et j'ai du le payer pour qu'il le regarde.Voila maintenant les 2 kt et le cd ne fonctionne plus et personne en France ne sait le réparer. J'aimerais vous envoyer la partie K7 et cd pour que vous les repariez. On peut trouver un moyen pour que je paye votre travail, je vous envoie l'argent avec les pièces à réparer ou je vous fais un virement.Merci de vôtre réponse, Antonio
@blingonitКүн бұрын
I am so sorry to hear this, sorry I responded so late, for me this is a hobby, i am at work all day and is very hard to do those videos, the purpose was to help people just like you because it happened to me too,i really appreciate you asking my help, so i will try to find you a cd unit to replace , I don’t promise because is very hard but if I succeed i will send it , please tell me exactly the model number of the panasonic because there are Asia and Europe models and they are different
@antoniodacosta1991Күн бұрын
@@blingonit Bonjour et merci pour votre réponse, ne pensez vous pas que ce serait plus facile pour vous de regarder le mien, car il fonctionnait bien avant que je le démonte, je pense que ce n'est pas grand chose, mais je n'ai pas votre expérience
@ВасяПупкин-с9е7д17 күн бұрын
👍
@blingonit17 күн бұрын
Thank you very much
@Ivan_Bugil21 күн бұрын
динаміки потрібно фарбою від принтера чорною)
@ВасяПупкин-с9е7д24 күн бұрын
👍
@blingonit24 күн бұрын
Thank you very much, more videos coming soon
@stepanstranik3326Ай бұрын
Nelíbí ... original je lepší.
@ВасяПупкин-с9е7дАй бұрын
Супер !
@blingonitАй бұрын
Thank you very much, this was a big and challenging job , but i am happy with the result
@jaydawg4065Ай бұрын
Beautiful
@blingonitАй бұрын
Thank you very much, more videos coming soon
@ВасяПупкин-с9е7дАй бұрын
Сам покрасил ?
@blingonitАй бұрын
Yes , this unit was full off cement and sand it was destroyed but i give it a try to repair it , this is how it all started,kzbin.info/www/bejne/fHuomHaAqbClr7csi=_0UvIcFZnayQvPj6
@jaydawg4065Ай бұрын
First
@blingonitАй бұрын
Thank you very much
@angelrueda6501Ай бұрын
Hello, good job. I have illuminated the display but when closing the lid it does not turn off, how have you made it turn off when it closes?thanks
@blingonitАй бұрын
Good question, please watch my videos hi hi especially this one kzbin.info/www/bejne/l4e5e4R_hbCjg80si=-shNyoZfX10RMlla , good luck with your project, this unit is now in my top five boomboxes
@blingonitАй бұрын
The kill sw is controled by the big gear that aligned the cobra clutch it’s simple there are two plastic pins on that gear one is longer, very perfect to push on the switch so midle is power to one side is presence sensor and the remaining is the rgb , power is on presence sensor when the cobra is closed and the rgb is not powered and reverse when the cobra is open the presence sensor module in not powered onand the rgb is powered on
@muhammadthameem8713Ай бұрын
Super set
@blingonitАй бұрын
Thank you much for your support, more videos coming soon
@muhammadthameem8713Ай бұрын
How much
@blingonitАй бұрын
Sorry not for sale yet
@Лютик-ю2цАй бұрын
Да, технику делали просто обалдеть!!! Мечта! Заправка есть, там всё уставлено такой техникой, заходишь, о машине забываешь)🎉
@juancruz8950Ай бұрын
Una de las mas hermosas radio grabadoras de los 80's.....
@blingonitАй бұрын
This unit at the beginning of repair kzbin.info/www/bejne/nZ6XaYGhe7JgipIsi=4pumIFss0jv8zQX6 , and yes it is the same unit
@blingonitАй бұрын
The final product , and yes it is the same unit kzbin.info/www/bejne/d3O2mnyMaq6lmdEsi=asHfJK2JOpkyolTH
@blingonitАй бұрын
The final product , and yes it’s the same unit kzbin.info/www/bejne/d3O2mnyMaq6lmdEsi=asHfJK2JOpkyolTH
@Mister-SalieriАй бұрын
Hi! What does that switch switch at 4:49 does?
@blingonitАй бұрын
Good question,, the sw is telling the microprocessor that the laser assembly is all the way back to center of cd or 0 so that the power to the motor that move the assembly is stopped, if the switch fails the motor brings the laser assembly back to 0 and keeps running until something burns or brakes, in times all sw oxidaize and need to be cleaned
@ВасяПупкин-с9е7дАй бұрын
В России этот аппарат прозвали - Кобра
@blingonitАй бұрын
After repair this model is now in my top five boomboxes
@ВасяПупкин-с9е7дАй бұрын
👍
@ВасяПупкин-с9е7дАй бұрын
Классный магнитофон ! У меня в коллекции Toshiba нет . 👍
@blingonitАй бұрын
Thank you very much, it’s a little nice unit
@ВасяПупкин-с9е7дАй бұрын
У нас в России в 90-е продавались такие аппараты , они были относительно дешёвые , потому что были низкого качества , но зато доступные по цене
@blingonitАй бұрын
The cassette mechanism is full autostop system the good stuff, overall construction is good , i love the all around wu-meters , nice eq, but the speakers are missing the high, this a major drawback the speakers in my opinion, I added a pear off twitters and everything changed now is sounding decent,,, back in the day the market was flooded with cheap units some were very bad some tried to be a little bit different, the golden era of boomboxes slowly dies , thank you for time , more videos coming soon
@stepanstranik3326Ай бұрын
Internacionál, Fugison, Mekosonic apod ... :-D Jj, známe, pamatujeme. Často to ani nebylo stereo, ale popsané to na stereo bylo. :-D
@blingonitАй бұрын
That’s right, those were the times, I have an original sharp that is similar to all of those including this osaka , but inside all are different, some are mono. , and the other stereo , I don’t have any mono hi hi so far😁faith, but back in early 90’s ho own one was the guy and invited to all parties 😎, thank you for your support, stay tuned for more videos
@Konstantin-su6czlАй бұрын
Скм ля. У меня друг с рэпом познакомился, когда я переписал ему кассету на Весна 309-2 через микрофон МД-200 на китайский магнитофон. А у кого-то был двухкассетник
@jim7174Ай бұрын
My old stereo cost 129£ in 1985 from Currys in the UK loved this thing 😃
@blingonitАй бұрын
This unit was saved from destruction, but unfortunately the damage was extensive and in order to save it some modifications was made and a little upgrade a little bluetooth , some rgb music controled lights, nice wu-meters, new paint , new hand made speakers protection nets, new belts, beautiful rings arrond the speakers, the list is long but , The SOUND is amazing , kzbin.info/www/bejne/n3K6ZGmkfrNjgK8si=xcwB8Vdwh11jcLqj. Thank you for your support
Yes you are correct, the remote is very expensive ,kzbin.info/www/bejne/n3K6ZGmkfrNjgK8si=xcwB8Vdwh11jcLqj. , I got lucky too find one, if you have the patience and a little time, in the end i think this unit is worth saving, now is in my top 5 boombox that i love , the parts are not hard to finde, and is not hard to service , in 30 years this panasonic dt75 was the only one that I got, pretty rare and if they appear are expensive and are broken so , if you decide to repair one i will answer all you’re question , thank you for your support
Yes , a very good sharp copy , I think there were some parts available and they had to sell them somehow, nice sound but you have to play with the eq, and is very loud, this is a ghetto blaster , depending on the size of the room , it can sound great or not , and it has instruments in , that’s for the suport
@blingonitАй бұрын
They made a lot of replica of the sharp , some ware bad , i seen at least 5 variations of this model
@alfredofloress3435Ай бұрын
👍👋🇲🇽
@blingonitАй бұрын
Thank you 🙏 for your support, more videos coming soon
@alexanderkorotenko5454Ай бұрын
Ни чего больше за кадром не дорабатывали?
@blingonitАй бұрын
Good question,,, yes later on because the unit is heating up right below the cobra mechanism,and the unit is not seated on flat surfaces, a problem developed, the clutch slips and cobra has trouble opening or closing it needed a little help , as soon as the unit cools down everything is ok , so i open the clutch assembly and add a drop off steaky white grease , like the cassette tape open door delay mechanism,everything is working perfectly now
@alexanderkorotenko5454Ай бұрын
Подскажите пожалуйста, после замены фетровых прокладок, козырек заработал в штатном порядке без лишних хрустов и прокручиваний в нутри шестеренок?
@blingonitАй бұрын
When the unit is open for repair noise from cobra gears is present,if it remember correctly, only for opening, i grease everything I adjusted the axle but the noise is there only when the unit is open , I think this is normal operation, my advice is clean,grease, and if you repair the clutch every thing is going to work a long time , good luck with your project
@alexanderkorotenko5454Ай бұрын
@@blingonit спасибо
@alfredofloress34352 ай бұрын
👍👋🇲🇽
@zombiezvy99682 ай бұрын
just grabbed one of these for 20$ at a pawn shop! cassette player needs fixing but i'm super excited to have found one for so cheap!
@blingonit2 ай бұрын
Nice work, these boombox became rare by the day, i never seen one again in five years now after I repaired the one in this video , you are so lucky to have found this boombox , Good luck with your repair and thank you for your support
@RazelolGaming2 ай бұрын
Jesus is King, He died on the cross for you! Repent for your sins and you will be saved!
@RazelolGaming2 ай бұрын
Jesus is God. Jesus is King. The Holy Trinity are above all.Repent and follow Jesus!
@viktor_savitskyi2 ай бұрын
Wow 🎉👍🏆
@blingonit2 ай бұрын
Thank you very much
@viktor_savitskyi2 ай бұрын
Who replaced the speaker foams for you, It looks like it not installed correctly.
@blingonit2 ай бұрын
The speaker foams is not foam is a cloth and silicon formed mix fabricated by hand, by a craftsman, they are looking a little strange because they seethed face to face on transport and i filmed in the same day , but they returned to normal a couple days later, and they sound amazing, if you don’t believe me check the final presentation video , i love the sound and the final result enjoy,kzbin.info/www/bejne/d3O2mnyMaq6lmdEsi=KLdX-UA8wC4fGCxS
@viktor_savitskyi2 ай бұрын
This is cool. Where can I order pair of it?
@blingonit2 ай бұрын
@@viktor_savitskyiI will be back with an answer soon
@viktor_savitskyi2 ай бұрын
@@blingonit thank you))
@blingonit2 ай бұрын
I have a bad news , the craftsman sad it no longer works so can’t help you, but maybe you find some replacement foam on ebay that you can order, good luck with your repair
@Jon-rv8rg2 ай бұрын
jvc-rv-nb 10 Master bass sound KING ))
@blingonit2 ай бұрын
Nice solid unit
@alfredofloress34352 ай бұрын
👍👋🇲🇽
@blingonit2 ай бұрын
Thank you very much
@kaireile86102 ай бұрын
What is the name of this song?
@blingonit2 ай бұрын
Is a no copyright song, a templete in capcut
@blackbemoth98562 ай бұрын
Foarte tare! Super! This îs the best!
@blingonit2 ай бұрын
❤❤❤
@ErnestMaritim2 ай бұрын
small device but complex.....
@blingonit2 ай бұрын
A lot of engineering went building this unit, the result is amazing , unique, and sound quality is very high, thank you very much for your support
@SergiuCatalinVlad2 ай бұрын
Frumos, vroiam sa fac un comentariu răutăcios, dar arata impecabil, nu am ce sa zic de rău, ține-o tot asa și mai bag un JVC
@blingonit2 ай бұрын
Ma bucur ca ti-a plăcut, pregătirea unui mare JVC e in toi
@robertolucian36982 ай бұрын
Very goob job. The quality is insanely good. See u with the next one. Keep up with the good work. Great.