Thanks good video. Have used the same type of transistor loaded to about 60% and worked well with little temperature rise. The fact that these are cheap transistor they do very well and can be used in so many ways. I remember years ago purchasing OC45 and OC71 for projects and the caution one would had to exercise not to turn them in to a puff of smoke. So thanks.
@AIexanderHartdegenКүн бұрын
hi, glad you like it, thanks for commenting. Fake from China makes thing tough, but sometimes we can found good bargain. It's a risk to take.
@user-sq2le6hq9v5 күн бұрын
Très bien fait et bien expliqué- Très bon TP -et de bonnes recommandations Merci du SENEGAL Que Dieu vous garde-
@AIexanderHartdegen4 күн бұрын
Que prend les bénédictions ainsi que les remerciements, merci de ton commentaire (la vidéo n'est pas parfaite mais bon y'a lessentiel).
@blauwzakjecrack12 күн бұрын
i would advise using the volt test fuction on your multimeter to test if the adapter gives (the correct) voltages on the plug, A continuty test of the wires is not a does not proof the adapter to work.
@AIexanderHartdegen12 күн бұрын
Of course. I think a part was missing in the video, or not filmed. The repair is old, didn't remember exactly. Thanks for commenting.
@Not_Nyx86412 күн бұрын
Coming Data? Lol
@AIexanderHartdegen12 күн бұрын
sorry?
@Not_Nyx86412 күн бұрын
@@AIexanderHartdegen the name of the power supply
@AIexanderHartdegen12 күн бұрын
@@Not_Nyx864 Ho that's the name of it. Yes it's a very strange name for a power supply. We finally don't know what to expect from chinese manufacturer. Bad design and pooky names.
@jdecouverte275213 күн бұрын
Les vidéos sur cet appareil sont rares. J’ai Le Mec 100 depuis 2 ans. Et comme vous, je suis très satisfait. C’est vraiment un outil indispensable, surtout pour le dépannage électronique. Merci pour cette vidéo bien intéressante.👍 +1 abt
@AIexanderHartdegen13 күн бұрын
content que la vidéo vous plaise. C'est un très bon appareil, il nécessite toutefois une petite modification: il faut souder un pont entre les deux machoires de chaque pince, le moindre mauvais contact engendre des mauvaises lectures, et le besoin de pince kelvin n'est pas indispensable sur une distance de quelques centimètres. La rareté des vidéos sur cet appareil est une des raisons pour laquelle j'en ai fait quelques unes. Merci pour votre commentaire.
@user-ev5vs5xs9n16 күн бұрын
Ltd USA
@AIexanderHartdegen16 күн бұрын
glad you like it
@LaercioccmirandaCardeal-ei6ch16 күн бұрын
Quero concerta o meu sua asistencia fica aonde
@AIexanderHartdegen16 күн бұрын
this video is a help.
@LaercioccmirandaCardeal-ei6ch16 күн бұрын
Meu fluke 725 liga depois apaga e so fica amensagemm messuramento de medida, da um tempo e desliga faço o que, vc tem p vender essa tampa do fundo onde fica a bateria
@AIexanderHartdegen16 күн бұрын
this device is not mine. It was restitued to the owner of it. You probably have the same issue than on the video, maybe a drop causing a damage with a desoldered component. You need to open it carrefully and look if there is any damage on it.
@Ajeetkumar-lv4bi18 күн бұрын
Is problem ko kaise solve kre
@AIexanderHartdegen18 күн бұрын
कोई समस्या नहीं है, यह वीडियो केवल जेनर डायोड का अधिकतम मूल्य दिखाता है जिसे इस डिवाइस से जांचा जा सकता है। यहां जेनर डायोड पर अधिकतम वोल्टेज अधिकतम 22/24 वोल्ट है।
@hermannschaefer477721 күн бұрын
Grundig is loooong gone. Nowadays it's just a brand name flying around, atm the brand name is owned by Arçelik / Turkey.
@MetrologieGiraud21 күн бұрын
thanks for the info
@AIexanderHartdegen21 күн бұрын
it can explain why this brand is rare nowaday. Thanks for commenting.
@blx259921 күн бұрын
brain fry
@AIexanderHartdegen21 күн бұрын
for 5 dollars that's a good fry. isn't?
@robertdariofernandez24 күн бұрын
Excelente ❤ #stilomacgyver , Ya tengo el video del #minicautin Clip aquí #minicautin Saludos ❤😊🎉
@AIexanderHartdegen24 күн бұрын
hello, glad you like it.
@janjanowski268227 күн бұрын
markowy i najtanszy miernik zmierzył mi napiecie z roznicą 0,15 wolta
@AIexanderHartdegen27 күн бұрын
it was a measure for alternative voltage. Alternative voltage can be different from a meter to another one, because capacitors used can be slightly different in term of accuracy.
@robertorober7369Ай бұрын
At the 1990 years a comercial wirer was in the market. That's called Magic Wire , but dont have to much exit. Now it's imposible to find any Information from that.
@AIexanderHartdegenАй бұрын
sometimes a little thinkering can do a great job. Some devices disapear over the years. Like radioshack and his stuff. Thanks for commenting
@robertorober7369Ай бұрын
That wirer have another interesting feature. Two 1,5 AAA batterys connected to a Buzzer. One pole IS connected to the metalic bobine. ( The first turn of the cable IS nude and making contact to the metalic bobine). And other pole to the metalic tip. With that you: 1st. When you are peeling the cable , the Buzzer IS making sound. 2nd If you touch with te tip a wired pin , if IS well connected , the Buzzer makes sound.
@robertorober7369Ай бұрын
@@AIexanderHartdegen The circuit IS tip-> 1,5 AAA battery-> 1,5 battery- -> buzzer-> Metallic base of the bobine-> first turn of the cable
@guateque1718Ай бұрын
I couldn't get the Mec100 in my part of the world but I did get an Mf470 by a company called Alignimals. It uses exactly the same case and buttons as the mec100 and several other similar meters. The Mf470 gives the esr, capacitance value and the % difference to the nearest standard capacitor value. It does not have Kelvin leads like the Mec100 though. I wonder how much difference there is between these two devices. Thanks for the review.
@AIexanderHartdegenАй бұрын
@guateque1718 hi. Apparently there is no much difference between them. the Mf470 has abilities to measure very high value, for who need it, like many farads in capacitors. But it can also measure very low capacitance. That's a kind of beasty. MEC100 is not so powerfull, even if it uses kelvin clip. Kelvin clip can be used to (supposedly) give better result for ESR and so on). But who cares about so short probe. I think they are quite similar. Kelvin clip for those kind of measurement are useless at my sens. Mf470 seems to have a really specific use for big capacitors measurements. It seems to not suffer from a lack of something... A least I didn't see what. Thanks for commenting.
@DerBoss-hr3tsАй бұрын
great video buddy!
@AIexanderHartdegenАй бұрын
glad you like it.
@williamaugust2762Ай бұрын
so compare to sugon t21 which one is good?
@AIexanderHartdegenАй бұрын
sugon of course.
@williamaugust2762Ай бұрын
@@AIexanderHartdegen done thnx for the info
@panther105Ай бұрын
These are expensive....even the Chinese ones!! Nice save on this one.....But without another fuse maybe it will overheat again and blow the primary windings somewhere in the middle?
@AIexanderHartdegenАй бұрын
No. A transformer can be safe just with an external fuse on the primary. If a short circuit occurs in the winding, or something similar, the dedicated fuse will blow up at specified intensity. Those kind of internaly protected devices are specific for low consumption compliance, adding a higher security improvement. Mainly those protection are made to prevent thermal runaway. Of course, an external fuse is always need to protect the entire device.
@user-it7ob6vy2sАй бұрын
Is this working on 12v
@AIexanderHartdegenАй бұрын
no. Only if you use symetrical boost power supply. Minimum 30V
@redhytechАй бұрын
the TDA7293 is for 4 ohm speakers, the TDA7294 is for 8 ohm speakers.
@AIexanderHartdegenАй бұрын
ok maybe this is why it becomes so hot.
@redhytechАй бұрын
@AIexanderHartdegen I think these chip run hot no matter what. I burnt up 3 of the tda7293 chips using 12v-0-12v power supply. First one burnt up instantly, the other 2 took about 2 to 3 minutes before they fried. I'm looking into other options, these tda chips are junk.
@alaaj99Ай бұрын
Did you find any way to Calibrate/Adjust the Voltage in this meter?
I was stopped by this unknown resistor network. A lot of search and nothing about it, even schematic didn't help at this point. The idea is to build a new resistor network by analysing needle span and voltage injection, each resistor working with the other when using higher caliber. It's on standby for the moment, searching between replacement part or recreating it. Thanks for watching.
@high_voltage6032 ай бұрын
@@AIexanderHartdegen well it sounds like a nice idea u can search for the diagram of the meter if u could find any i will try too keep uploading king
@quevineuxcrougniard29852 ай бұрын
"on va dire" revient souvent, mais qui ça :"on" ? Est-ce vraiment vous qui parlez ?
@AIexanderHartdegen2 ай бұрын
I don't understand your request, sorry.
@doublepinger2 ай бұрын
When you go to remove the battery and the compartment comes off. It is like a joke from a cartoon.
@AIexanderHartdegen2 ай бұрын
Yes, it's hilarious. Hopefully, because this video is not dramatic.
@gabrielpowers7662 ай бұрын
Who else not surprised at all when you saw that corroded battery? I would have bet $100 that their was a corroded battery in there before he opened it.
@AIexanderHartdegen2 ай бұрын
I think nobody was attempting something with that multimeter since few years.
@tr_2sc19702 ай бұрын
I have the same one
@AIexanderHartdegen2 ай бұрын
it's a very nice multimeter, when working.
@tr_2sc19702 ай бұрын
@@AIexanderHartdegen Once a Voelkner Electronic shop in Germany closed 1991 and started selling things so cheap, I bought two of these, the one has the shunt protection diode (like a varistor) defect I could repair it, and the other was brand new.
@AIexanderHartdegen2 ай бұрын
@@tr_2sc1970 you was unlucky to have your seller closed, but lucky to find this very nice multimeters. good bargain. thanks for commenting from Germany.
@alch3myau2 ай бұрын
You get what you pay for.
@AIexanderHartdegen2 ай бұрын
As your comment.
@electronicmt._.31382 ай бұрын
can I fix my old digital mutimeter damaged by EMP? and please make a video about how to make a tesla coil
@AIexanderHartdegen2 ай бұрын
what kind or brand is you multimeter
@ioanginsca23302 ай бұрын
Hi Alex, can you please share us where you bought the new AN8002 because I contacted several sellers and none of them could tell me if they sell the new AN8002
@AIexanderHartdegen2 ай бұрын
Hi, normaly there are all replaced by new versions. They are claimed "anti burn circuit", avalaible in multiple colors (black blue orange and black). Also the result of all those improvement are the price, they are 20 box more than 13 at their first release more than 10 years ago. On ancien version, on voltage caliber, only DC and AC are indicated. On new version, on voltage caliber, you will see % and Hz added. Thanks for your interest.
@ioanginsca23302 ай бұрын
Thank you for informations !
@ioanginsca2330Ай бұрын
Hi Alex, I received the multimeter, it works ok, it is fast, but sometimes I would like to use manual range; do you know if it's possible because it doesn't have range button on the back of PCB like the old model. Regards Ioan
@DiscipleW2 ай бұрын
I got a problem where headphones started playing on right only in a specific volume nob position it plays both Left and right... no shock induced to the interface just started doing it ...
@AIexanderHartdegen2 ай бұрын
hello, probably a bad joint connexion on the pcb where the headphones are connected. But also a bad connexion joint on the balance lever potentiometer. Need to reflow them.
@DiscipleW2 ай бұрын
@@AIexanderHartdegen thank you for the prompt response! Turned out to be the Audio technica'si Headphones 6.3 cable adapter. Sorry to bother you with misleading info...
@space_cowboy0072 ай бұрын
Bonjour, quel est l'outil de mesure utilisé à 2:00? juste un ohm-mètre?
@AIexanderHartdegen2 ай бұрын
@space_cowboy007 hello non c'est un ESR meter, fait maison.
@space_cowboy0072 ай бұрын
@@AIexanderHartdegen Bonsoir et merci, je ne savais pas qu'on pouvait tester l'esr sans enlever le composant!
@AIexanderHartdegen2 ай бұрын
@@space_cowboy007 il faut pour ça que l'ESR-mètre travaille avec une tension assez faible. Sur cet appareil fait maison elle varie de 200 à 50 mV pour 60 Khz. Le ca typique d'un ESR du commerce est une tension de 100mV pour 100 Khz.
@t1d1002 ай бұрын
A work of love, from which you gained some knowledge...
@AIexanderHartdegen2 ай бұрын
glad if you like it. Thanks for nice commenting.
@keen24612 ай бұрын
Thanks for sharing it.
@AIexanderHartdegen2 ай бұрын
you're welcome.
@FixTronics2 ай бұрын
Nice demonstration brother As you said the transformer needs to be a bit beefier so it can handle the power demands and provide sufficient power to the tip especially when dealing with large pads and or thick boards.. By the way it still good enough as it is
@AIexanderHartdegen2 ай бұрын
Hello, The voltage avalaible on the secondary output is made for T210 and T115. On other unit, like T420, many supplys are required, like 12 V and 24. But honestly, I purchased a lot of T210 tip because I am in love with it. So, this sation is perfect for me. Thanks for commenting and see you soon bro.
@c2p8832 ай бұрын
mantap 👍
@AIexanderHartdegen2 ай бұрын
"mantape" means in French (because I am) " I don't give a shit". But I suppose you like it, isn'it.
@AIexanderHartdegen2 ай бұрын
ok thank you
@rasdiarmadi98652 ай бұрын
"mantap" is idiomatic word in Indonesia it's meant very good,good job and other like that I am Indonesian too.I like your idea👍👍👍@@AIexanderHartdegen
@LawpickingLocksmith2 ай бұрын
OMG
@AIexanderHartdegen2 ай бұрын
just don't buy it.
@zinoland2 ай бұрын
Bonjour ça tombe bien j'ai ce produit de chaîne 😊 je pense acheter sunshine 210 avec les mêmes tips que tu montres....tu penses quoi de la qualité ?
@AIexanderHartdegen2 ай бұрын
ça fonctionne très bien. Les tip si elles ne sont pas nettoyée au niveau des contacts retransmettent mal voir pas la température et ça fait de sabériations. Merci pour ton com (pour les 105 y a relife), si ça t'ntéresse je peux te mettre le lien du fournisseur chez qui je les ai prises
@zinoland2 ай бұрын
Merci pour ton temps je vais voir côté relife et c'est disponible près de chez moi merci bcp
@subsix2 ай бұрын
Explications au top, merci
@AIexanderHartdegen2 ай бұрын
content que ça te plaise. Merci pour ton commentaire, à plus :)
@NikolaPASULJ2 ай бұрын
Toujours très intéressante tes vidéos, encore merci.
@AIexanderHartdegen2 ай бұрын
Merci pour ton commentaire, bonne soirée à toi et à bientôt.
@messyazid90612 ай бұрын
Le porte instruments le moteur de leguille et hs ces tous porte instruments a réparé le calculateur rien a voir le pire yen na qui von vous croire a fond
@AIexanderHartdegen2 ай бұрын
la voiture c'est toi qui l'a réparée en fait?
@audiossmarioss942 ай бұрын
Dzień dobry. Mam pytanie. Posiadam taki sam wzmacniacz, zasilam go +/-68V 500W transformator, głośnik 8 Ohm i przy dużej mocy gdy gra muzyka wzmacniacz zaczyna przerywać, odcina go. Wie Pan dlaczego?
@AIexanderHartdegen2 ай бұрын
over heat. You need a better heatsink and an additionnal fan.
@JoseSilva-dy1op3 ай бұрын
What is the audio generator you are using on your phone :
@AIexanderHartdegen3 ай бұрын
This is not a phone, but an Archos mp3 player. It plays some wave tracks from KZbin.
@lansdragon25423 ай бұрын
Неплохая работа, на скорую руку отличное решение
@MetrologieGiraud3 ай бұрын
Спасибо за ваши комментарии.
@AIexanderHartdegen3 ай бұрын
Thank you. This is a simple repair, but efficient.
@nikolaitsanev22223 ай бұрын
15 mins no info
@AIexanderHartdegen3 ай бұрын
No info of what? Buy it if you want, I don't give a F.
@pixellark31863 ай бұрын
Which one do you recommend between the blue 2 ESR and the old Bob Parker one? My friend wants to sell me a old stored one. Thanks and best regards.
@AIexanderHartdegen3 ай бұрын
The old one use 6 AAA batteries and is still sold (If your talking about the really old one). The classic one (blue ass well) use 9 volts battery. The ones of AliExpress use also 9 volts battery. But on the Bob Parker page (EVB portugal) they sell new version, working with 2 AA batterys, wich are great. As you can see, they work all fine.My blue one is the blue one from Ali (9volts battery) with a little bit different start message on the screen, log is slightly different). I had the Sxx model but was stolen at work, in my electronic bag, with tablets and stuff. A bad day. If price is nice you can take it, according your budget. This model is a real value, hard to find. If you want to start differently, you can buy the blue of aliexpress, or the new blue working with 2AA battery (wich is nice). Hope it helps, thanks for commenting.
@pixellark31863 ай бұрын
Please confirm if you have understood the following revised version of the text you provided: "Thank Alex for responding. I apologize for what you went through. I am interested in purchasing Blue2ESR from EVB but I am unsure if it provides protection from charged capacitors like the previous model did. I am feeling quite confused as I bought a Russian one which has good specifications, I also have a Shanon tweezer but I do not trust its ESR measurement accuracy.
@AIexanderHartdegen3 ай бұрын
@@pixellark3186 You need to know than ESR reading can vary from a device to another one. Because precision of the frequency injected, also difference of unity treatment, according choosen components and so on. You can have different ESR reading with both nice different devices. On EVB portugal, the model sold are able to control Battery's ESR. That's simple. If they afford battery's ESR measurement, they have not protection diode against overvoltted capacitors. If they can NOT check battery ESR, that means there is no diode protection, and so you need to be carrefull with those one. Presence of diode or not is not a real concern, because you can install it your self, or remove it your self, according to be cautious when using the device to check some battery's ESR. Precision of such device is not we are expected for, but something near from a low or low esr. As I told earlier, such values can depend of stable frequency, different electronic treatements, and unless you have a high metrologic devices, ESR is not easely define, because all those parameters. Electronics guys need just an idea of ESR. The bad idea is to measure ESR with " component tester" from AliExpress. Those device can not provide a good value. Before purchasing some device, be sure if they are protected against volted capacitors, or if they are able to measure batterys. They can not make both, because if you have diodes in the entry you can not inject voltage higher than 0,5V. (but you can remove them and inject votlage with a 240ohm R, and shortcircuit it). Anyway, if you're not sure, you can remove, or solder your self double power diode on entry, to protect your own equipment if not already protected. See you soon.
@pixellark31863 ай бұрын
@@AIexanderHartdegenThank you for taking the time to write. I only need to know if the outcome is good or bad, rather than being accurate. Bob Parker himself informed me that Mr. John Bachman from AnaTek Corporation, may God bless him, tested the blue 1 ESR with charged capacitors and found that some traces were blown, but the microchip was not affected at all. If you were in my situation, which option would you choose without considering the cost? EVB Blue2ESR OR Old design or there is another device you like more i asked you because you use many ESR devices and techniques thanks
@AIexanderHartdegen3 ай бұрын
@@pixellark3186 the best for me is this tiny LCR meter, providing ESR and capacitance fr.aliexpress.com/item/1005005949044626.html?spm=a2g0o.productlist.main.63.75924fackktPVH&algo_pvid=cd6a84a9-d113-48da-9767-f03a679ac354&algo_exp_id=cd6a84a9-d113-48da-9767-f03a679ac354-31&pdp_npi=4%40dis%21EUR%214.57%212.88%21%21%214.79%213.02%21%402103890117143205636238031e4ada%2112000034984108584%21sea%21FR%210%21AB&curPageLogUid=ZhF7ZantKEqU&utparam-url=scene%3Asearch%7Cquery_from%3A The other best for you is this one fr.aliexpress.com/item/1005005653533900.html?spm=a2g0o.productlist.main.31.4feb4911qKSE8a&algo_pvid=d12b468a-d844-4266-ae00-fae501e960b7&algo_exp_id=d12b468a-d844-4266-ae00-fae501e960b7-15&pdp_npi=4%40dis%21EUR%2158.80%2158.80%21%21%2161.61%2161.61%21%402103835c17143207390658207e0e1a%2112000033898356922%21sea%21FR%21782360043%21&curPageLogUid=diwv90ObIqjx&utparam-url=scene%3Asearch%7Cquery_from%3A Very low cost but very fagile, only this model is able to do a great job, another chinese component tester are not so good fr.aliexpress.com/item/1005006109595999.html?spm=a2g0o.productlist.main.1.2027lHg5lHg5Ag&algo_pvid=731e25da-aabc-4d8e-bc20-61909eaaf0d7&algo_exp_id=731e25da-aabc-4d8e-bc20-61909eaaf0d7-0&pdp_npi=4%40dis%21EUR%2132.47%2117.69%21%21%21246.72%21134.40%21%402103835c17143204756192371e0e1a%2112000035789429629%21sea%21FR%21782360043%21&curPageLogUid=7VfrUU3qv03u&utparam-url=scene%3Asearch%7Cquery_from%3A All are nice. The last one is fragile, if you forget a charged capacitor, it will be fully destroyed. The blue one is perfect. You can also buy it from Aliexpress So, do you need to know capacitance in the same time you check ESR? If no, go for the blue one, he's quick and reliable. If capacitance can be a nice information meanwhile you' re measuring ESR, MEC100 is ok. Just look what you need and buy your device you want.
@FixTronics3 ай бұрын
Nice tool and great explanation 👍🏻
@AIexanderHartdegen3 ай бұрын
thanks sir. thanks for comenting, see you soon.
@FixTronics3 ай бұрын
@@AIexanderHartdegen You welcome brother
@KeepOnTesting3 ай бұрын
Love those 3D Prints ..Alex you bought a vise, was it printed in 3D as well..?( Désolé, c'était juste une blague mon ami!). 😊
@AIexanderHartdegen3 ай бұрын
@KeepOnTesting Hello Darren, the vice a very nice vice from England. Not a chinese one, and not a printed one. But high end full metal printers could print it, but not this time. This fleamarket was not my usual one, but it was very nice, populated, and varied. So it was a very nice ride. Thanks for comenting :)