How to make a T12 handle in T245 JBC style

[@KeepOnTesting]

Interesting as always Alex..merci mon ami ! I'm curious, which soldering station is your daily driver?

[@AIexanderHartdegen]

Hello Darren, Hope you're well. My daily station is the one I use in the video, a T12 kit diy with a JBC style handle. This is the station who automaticcaly switch on when I powered my bench. This is not the most expensive, but this is the perfect for a daily use. Other station are used when I work on something specific. Thanks for commenting, and congratulation for your channel, it's going bigger and bigger! See you soon.

[@KeepOnTesting]

@AIexanderHartdegen Nice kit 👌 I like the simplicity and quality. It's a solid unit, so should last a long time! Whoa.. You have lots of tips ! 😃 Seems like the sheer variety of soldering stations available these days has never been better. You're channel is doing awesome too..keep it up my friend 👍

[@AIexanderHartdegen]

@@KeepOnTesting thank you see you soon.

[@user-bw5hk5nb3k]

I have Try everything but only the upside from the grip i have done the t12 is going inside drilled with 6.5nr But the big problem is the doenside of the grip how i get that inside in😞

[@AIexanderHartdegen]

you need to open the handle by cutting it like I did, near from the tail (as explained on the video), and insert the tube/copper/wire connexion. Or I didn't get your problem?

[@user-bw5hk5nb3k]

So I've done everything. Do I have to cut the plastic tube at the bottom of the handle with the 6.5mm hole? I can get the T12 in but I can't get the connection adapter socket, I'm failing there :(

[@AIexanderHartdegen]

@@user-bw5hk5nb3k look here -> 5:52