HOLMENKOL Natural Bike Wash
0:36
4 жыл бұрын
HOLMENKOL Betamix RED Liquid
1:12
4 жыл бұрын
Пікірлер
@derzkoeradio
@derzkoeradio 3 күн бұрын
Hi! But for how long this works?
@PetrChytil-u2n
@PetrChytil-u2n 9 ай бұрын
Zu viel Wachs
@skiprofessor5328
@skiprofessor5328 9 ай бұрын
I actually perform this for 20 years today and must say you take to much edge metal and you are putting to much pressure on them as well (side edge) this is unnecessary to be honest and could be replaced with one way straight Push - twice if needed and then blue diamond twice and polish like this with red - no need to take them so much- otherwise you are getting closer to the sidewall and in few momenents you will need to extend the side wall edge to the level the edge will have full contact- sorry for the comment but I cannot agree
@Kuper133
@Kuper133 9 ай бұрын
М-да,это ж надо с одной лыжей три часа возиться. Что их надрючивать. Канты точнул,запарафинил и кататься. У меня вся семья катает и на мне подготовка две пары лыж и сноуборд. Я б таким способом до второго пришествия бы возился..😊
@Infinity2219
@Infinity2219 9 ай бұрын
Don't remove as much wax as he did or bronze brush as you will need to come back sooner. I'm a engineer and see how capitalism has crept into this video 😢
@FabianPircher-g7j
@FabianPircher-g7j 9 ай бұрын
yes if you let some wax on the ski it will hold longer but if you get out everything it’s faster
@Летодлядетей
@Летодлядетей 9 ай бұрын
Каждый раз это делать снимая крепления? Во что превратятся лыжи?
@Котэ-ы9щ
@Котэ-ы9щ 9 ай бұрын
Это показательное видео на новой лыже. Крепеж снимать не обязательно. Но если очень хочется - никто не запрещает!
@Kuper133
@Kuper133 9 ай бұрын
И что им будет если снимать крепления? Я всегда снимаю.
@86yutaka
@86yutaka 9 ай бұрын
wax使いすぎ(笑)! 滑走面が焦げるから何度もアイロンを当てるなと教えられていましたが、アイロンを動かすのを止めなければokなんですね。
@michaelkerr1755
@michaelkerr1755 9 ай бұрын
Don't file your base edge 😮 just diamond lightly you'll be base high in about two tunes if you file every time.
@chadridsdale9970
@chadridsdale9970 10 ай бұрын
No narration or description?
@drewblack3686
@drewblack3686 10 ай бұрын
some of the worst pre I have ever seen, against the direction of file and does he know how the iron should be used
@wisecoonie
@wisecoonie 10 ай бұрын
You just can’t use a basefile from tip to tail for both edges. Have you tried this yet?
@danibuhlmann4001
@danibuhlmann4001 11 ай бұрын
Keine Diamantfeile?
@BabbaBoom
@BabbaBoom 11 ай бұрын
Schleift man nicht in die laufrichtung?
@drewblack3686
@drewblack3686 10 ай бұрын
exactly, does he know what he is doing, even the iron is not used correctly, why does it have an sloping edge on one side
@wisecoonie
@wisecoonie 10 ай бұрын
Mît der Basefile ist das ja unmöglich. Und das Feilen soll nicht unbedingt von Tip to Tail gemacht werden, so lange man nach dem Feilen die Kante ganz sauber aufpoliert mit der Diamantfeile.
@Slears
@Slears 11 ай бұрын
Was für eine Wachsverschwendung...unglaublich...mit der Menge Wachs kannst 4 paar Ski wachsen...
@wisecoonie
@wisecoonie 10 ай бұрын
Stimmt. Warum wird der Tip gewachst? Blödsinn.
@randallj7901
@randallj7901 Жыл бұрын
'promo sm'
@bernharddixkes1745
@bernharddixkes1745 Жыл бұрын
wird das Wachs auch eingekocht? Danke
@tobiasgranegger6381
@tobiasgranegger6381 2 жыл бұрын
Sollte man das Klebeband beim seitenkanten feilen nicht abnehmen? Hat ja eine gewisse Materialstärke. Verfälscht das dann nicht die Grad?
@MrRacingExpert
@MrRacingExpert 2 жыл бұрын
Hallo Tobias, danke für Deine Anfrage. Das Klebeband dient vor allem als Schutz für den Belag während der weiteren Bearbeitung. Den Grad verfälscht es nicht. Viele Grüße, Dein HOLMENKOL-Team
@JaviataL
@JaviataL 2 жыл бұрын
So unglaublich ruhig und perfekt gearbeitet. Ich hab sehr viel gelernt. Vielen Dank
@MrRacingExpert
@MrRacingExpert 2 жыл бұрын
das freut uns :) Danke dir!
@mariakatz2317
@mariakatz2317 2 жыл бұрын
Hallo Herr Burmann, interessantes Video zum präparieren für neue Ski ! Meine Frage: Mein neues Wachseisen von Holmenkol (15mm Platte ) saugt sich beim Wachsen auf dem Belag fest. Bei meinem altes Eisen von Toko mit Rillen auf der Platte war das nicht der Fall. Passt evtl. die Bügelgeschwindigkeit oder die eingestellte Temperatur (nach Wachsvorgaben) nicht?
@MrRacingExpert
@MrRacingExpert 2 жыл бұрын
Hallo Maria, in diesem Fall solltest du etwas mehr Wachs verwenden, so ist der Belag auch deutlich bessere geschützt, das Wachs kann besser eindringen und verarbeitet werden. Wir hoffen das hilft dir weiter! Viele Grüße, Dein HOLMENKOL-Team
2 жыл бұрын
can you apply this wax on the ski base also?
@MrRacingExpert
@MrRacingExpert 2 жыл бұрын
Hi, yes, it`s a Universal wax stick for applying to skins and on the base. For all snow types and temperatures. Perfect care for all touring skin types. Find out more: www.holmenkol.com/de-de/en_GB/cat/Products-10100/Snow-10068/Alpin-10089/prod/Ski-Tour-Wax-Stick-160063/
@shady1080
@shady1080 3 жыл бұрын
Wem soll dieses Video ohne Kommentar oder zumindest Einblendung helfen?
@derzkoeradio
@derzkoeradio 3 жыл бұрын
Hi. Write me How often I should do it? Before every ski time? Or every 2 hours? Or every week?
@xicarmine2701
@xicarmine2701 4 жыл бұрын
Dieser Moment, wenn du deinen Nachnamen googelst und auf dieses Video stößt🤣🤣
@accouuunnnt8806
@accouuunnnt8806 4 жыл бұрын
Schönes Video
@andreyc.3600
@andreyc.3600 5 жыл бұрын
why do you need to establish the base bevel? imho modern skis do already have the right bevel.
@kaysonmalakai3711
@kaysonmalakai3711 3 жыл бұрын
I guess I'm quite randomly asking but does anybody know of a good place to stream newly released tv shows online?
@foxeverett8164
@foxeverett8164 3 жыл бұрын
@Kayson Malakai Flixportal xD
@kaysonmalakai3711
@kaysonmalakai3711 3 жыл бұрын
@Fox Everett Thank you, I went there and it seems to work =) I appreciate it !
@foxeverett8164
@foxeverett8164 3 жыл бұрын
@Kayson Malakai happy to help xD