Ive got a 78 f250 4x4, 4 inch lift on 35s with 355 gears. The 351m in it is tired and not long for the world. Ive got just about everything to swap a 300 into it including a bellhousing to mate it to my 4 speed. Do you think id be happy with the swap? Or would it be too underpowered

140 on the dash?

That extra 40ish kg weight on the DR is not trivial, but that front tire may have been the real problem. I do like the extrawide tires on the TW.

ok, Apples to Oranges here, look at your old trucks, full size, even oversized than reg cabs you have there, and you want to compare a smaller size model to those from the past (way past, I'd say from mid 70s model fords maybe even older) and those have huge V8s that you want to compare to a modern V6, not comparable anywhere on the planet Bud. stick to what you know, it's not Chevys smaller trucks, if you got a chevy full size truck same/near age of your fords, I think you would find them comparable, just as good as your old trucks. If you want an off road model truck, shop for one that is equipped for that.

I have question- The small port on the top of the wastegate, should it be conected somewhere or no pipe is conected to that small nipple ? at the 2:05

My current ride is a 74 highboy with a 460. It sat for close to 40 years before I obtained it. New bearings all the way around a new head gasket and wheels and tires roughly 9k$ to get it back on the road the previous owner lost the title to it so it sat for a long time until I had an interest. I had to get a bonded title to get it registered which happens next week 35k original miles and zero rust makes it a gem. It has lived most of its life in the high desert of Nevada so it’s a real survivor, cool video nice truck. Enjoy

Omg...I forgot it had the green interior dash lights! My uncle had the green 4-door sedan....talk about the green Hornet! 😂

What radio is that ? Awsome build dude!

I know you most likely don't have this anymore, but I heard if you change the transmission fluid and filter and put moble 1 synthetic transmission fluid in it, the shifting gets smoother.

You should add a back rest

What is the best way to keep an old car clean in the winter time and prevent frame rust, assuming your area uses salt on the roads?

This truck originally had Holley TBI all dodge trucks did from 1988 until 1991 this carburetor is a GM quadrajet

Howdy. Searched case 530 and found you. I've got one like your Gramps, draftonatic w triple range. Do you know if it has hydraulic filter and where it is? Thanks

I just picked up a 530. Can you tell me where you get seal kits for the cylinders, I’ve been looking and case can’t come up with anything TIA

How much was UR HOme LookS HuGe…😈😈🤪😵‍💫😵‍💫

Good job! I have rebuilt several of the Argos. My most recent purchase and project is a neglected Argo 750HDi 8x8.

That is a bad ass rig i love it

Did NOT expect that opening song😂

I think the one I just bought one just like that .the tags have been painted,the vin tag is still there.

I saw this on Alberta dual sport the other day, very happy to see this on here with the build! Thanks for uploading it

You were right about being concerned about the front end breaking off. If you’re still working on this trike, build a stronger reinforced steering column and forks. That’s a lot of weight.

do you sell this kit?

Sweet! Where abouts in Alberta are you?

Celsius? Really?

Took my driving test on a 1976, same color.

Of all things... In January '24, I just bought a running and driving, 1973 AMC Hornet Sportabout Gucci X 258 ci, automatic, tilt steering wheel, sport steering wheel, mag like wheels, power front disk brakes, roof rack, rust and dent free ... Whoo-hoo ! 🇺🇸 😁 🇺🇸

I just got my hands on my best friend that pasted away its the same truck big block and same color

Hermoso lugar!

It's my pot bellied mini bike hog

very cool i just learned a few things about the highboy

What firing order did you run ??

Sweet! Been waffling back and forth between buying a TW or a DR. Leaning toward the DR with 46T rear and then switch from 15 to 14 front for trails. And get rid of the widowmaker front tire.

great cold start up - lovin' these inline 6 engines ! How about the Cherokee XJ ? I also own a 1998 with the famous 4.0 engine. How does the 4.0 compares to the 300 ?

My dad had a 64 Meteor breezeway but had no power strreing or brakes but had the 352 V8 in it. I have a 65 Montclair Breezeway that i'm still driving.

1967 to 1977 mid year i believe ended divorced transfer case. I just acquired a 76 custom it getting full restoration 390 out of 1972 ...original c6 trans .. it has dual pistons caliber's on front axle..

Hello there, could I use a fragment of your video for my coldstarting compilation? Of course I will put a link to your original video in the description, increasing the original’s popularity too. Thanks a lot for you answer in advance :)

El 530 una máquina hinterminable

how reliable is that?

nice drone video

I have a super 44 on mine and it doesn't sound at all like that. What all is done to yours?

Pop the tires off, clean the rim seat with a wire brush & apply bead sealer around the rim before recounting. Tgat tire slime does not work, it never does. It just makes a horrid mess inside the tires. Tunes will rip tre valve stems off.... Tip: you can replace the 22x10-8 rudamuck tires with ATP mud lites 22x11-8. Cheap, chunky & my argo conquest swims with them as well

Excellent video.

That truck is cursed and jinxed and quadruple hexed to not want to start at all

that is the ugliest thing I've ever seen... I love it so much lmaoooo. I'm trying to find some old skis for one of mine to make something similar 🤣

Great project, do you drive it anymore? I got a Argo 8x8 1982 😊

thats an aftermarket behlen power steering system, likely added because it was near impossible to use the manual steering with the loader

your brake reservoir tops are on the wrong way round. Rubber is supposed to be on the inside.

What is funny is your gas engin sounds like are deisel 530

Are 530 has tube front axel and it has few old welds i think it had a loader on her at one time and we have newer round gadges

We have 730 case that same thing but we have deisels and we have case 310 dozer and a 320 teratrac case dozer and a bunch of new case garbage