The kitchen tongs were a life saver

Revenge

I had the problem with airway blocked error even if everything was cleared. I fixed it by cleaning the inside of the chamber with compressed air. I inserted the compressed air nozzle into each of the gaps one by one until all the dust was blown out: i.imgur.com/SFwbF6w.png. Additionally, I shook the vacuum cleaner with the dust chamber facing down, which helped to remove the remaining dust that had accumulated inside (under the aluminum plate with holes). After turning it on, the "airway is blocked" message still appeared, but switching the speed mode to boost/max and running it a few times eventually cleared/unlocked it. Hopefully, this will help someone as it helped me.

what you are doing here is a temporary fix what you have to do is a lot more involved with mine all the little compartments inside the hoover get blocked up with dust so what they do is clog the filter up quite fast and also can give a blocked error even after you clean the filter and obvious airways, I have to take the hoover completely apart to the bare bones and you will be amazed how much of the hoover ends up with compacted dust inside these little parts , as soon as you clear them it is like a new hoover until they start getting clogged up again but solves the problem for months

Your making m12 users look clueless 😂

That did not work.

I have a 40v battery for a B & D trimmer it will not charge. It doesn't have a lot of useage. When I check the voltge I get 36.2v. When I put it in the charger it blinks green 3 to 5 seconds then flashes red. I tried what you did with a good battery to no avail any suggestions. Thanks

Thanks a lot for this awesome trick! I tried it out, and it worked perfectly for me. My drill and impact driver's battery are charging again because of it. I really appreciate you sharing this-great video!"

Great demonstration and great explanation! Thank you!

Why is there a cut at 3:04?

Mine did not work, perhaps some internal parts are fried.

It ain’t even on the right setting this is stupid

Cuando te das cuenta en manos de un tarado que no sabe lo que tiene en las manos!! Y luego dicen: se quemo y se descompuso

just winding the line in the opposite direction has fixed my problem, thanks!

Which batteries did you use... 18650 but what amperage ?

Once it's manual - how do you get more string to come out?

Sorry. This video is misleading and not very useful.

I thought I'd see fair comparison between those drills but he lost me when he tried both of them drilling in drill mode not in hammer drill mode which not ideal on concrete. 💔

Bro my batteries don’t even leave the charger 😂

I’ve had mine on for like a week 😂

Yes lol its safe

stock footage type ai voice misaligned clipped ahh beat

What did I just watch?

This is just like printers and their cartridges.

I was gonna say, put it in hammer mode for reals. Crap video

Most Common Problems of Black and Decker Drill: toolcroze.com/common-black-and-decker-drill-problems-troubleshooting/

Read more about common Black and Decker trimmer problems: toolcroze.com/common-black-and-decker-trimmer-problems-troubleshooting/ Trimmer motor not working? Read this post: toolcroze.com/black-and-decker-trimmer-motor-problem/

Most common Black and Decker Drill Problems: toolcroze.com/common-black-and-decker-drill-problems-troubleshooting/

Ways to fix Black and Decker Drill Won’t Tighten & Won’t Release Bit issue: toolcroze.com/black-and-decker-drill-wont-tighten-wont-release-bit/

More Solutions for Black and Decker Trimmer Motor Related Problems: toolcroze.com/black-and-decker-trimmer-motor-problem/ Common Black and Decker Trimmer Problems Troubleshooting: toolcroze.com/common-black-and-decker-trimmer-problems-troubleshooting/

Black and Decker Drill Won’t Tighten & Won’t Release Bit? Read this post to troubleshoot: toolcroze.com/black-and-decker-drill-wont-tighten-wont-release-bit/

More details about Black and Decker Charger related problems: toolcroze.com/black-and-decker-charger-problem/ Troubleshoot Black and Decker battery not charging issue: toolcroze.com/why-is-my-black-and-decker-battery-not-charging/

Common DeWALT Charger problems Troubleshooting: toolcroze.com/dewalt-20v-charger-problems/

More Tips to solve Bosch C7 Car Charger Blue Light problem: toolcroze.com/bosch-c7-battery-charger-blue-light/ Common Bosch C7 Car Charger Problems Troubleshooting: toolcroze.com/bosch-c7-car-charger-troubleshooting/

Common problems with Meridian Trimmer you may want to learn about: toolcroze.com/meridian-trimmer-troubleshooting/

Reasons for Black and Decker Batter Not Charging: toolcroze.com/why-is-my-black-and-decker-battery-not-charging/ Troubleshoot Battery Blinking Red Issue: toolcroze.com/black-and-decker-battery-blinking-red/ Black and Decker Charger Related Issue: toolcroze.com/black-and-decker-charger-problem/

Some common issues with Bosch leaf blowers you might want to know about: toolcroze.com/common-bosch-leaf-blower-problems-troubleshooting/

Read on to understand better: toolcroze.com/change-dewalt-impact-wrench-anvil/

The one you showed for them metal is actually for wood and you drilling with the bit for Metal in the wood

I have this same model. Great all arounder!

Thank you it fixed my brand new batteries that I had not used for last 2 years.

why didn't u show hammer mode? useless video

Давить не нужно

What a useless video. Most of your little "checks" could've been done without even taking a part the impact driver.

First comment! - Is for 3453-20 model, right?

Where did you get the replacement motor from?

This helped me thanks!

Good gosh what a ridiculous video.

that worked for me. Thanks. Originally my battery would not charge, or light up, even when in charger that had charged all other batteries. Followed this video and managed to jump start the battery, it is now on my charger happily charging. Once again, thankyou

milwaukee sounds like a toy compared to the bosch