Thx, that was quick & easy. My filter looked much the same

Neat job , well done

Thanks for great video, well explained steps. Did you notice any stitching getting getting pulled tight enough to break if hog rings pulled hard on new cover. Planning the same on our 2000 4Runner front leather seats, but will also be dealing with power seat mechanisms.

Thx. About to remove panel on a 2011 due to a mirror that I think has a non working defrost.

99 limited , replaced mine with a 291 led ,, much brighter and runs much cooler ,, more $ though

8 months trying to clear the past phones. No one had an answer for the greyed out button. Some even wanted me to play around with a cable to the hand break. This is the only info I have found telling us the simple solution that works. Thank you so much 🙏🏽

Super helpful video! Thanks for making this

Thank you very much

same problem here, I asked support service, she send me a video of her gimbal that was exactly the same...

What size are the speakers?

Threading into plastic might hold up. There is an alternative way to secure the machine screw pin replacement that comes from the 3D-print world: melt a 10-24 heat set insert into the plastic part, and put some blue thread locker on the 10-24 machine screw before you screw it into the insert. The result is super strong. You have to shorten the insert to match the thickness of the geared part, but that's not difficult. I have three Aeron chairs; all had the pin snapped off. The fix has been rock solid for months.

It didn't work 😕

You shouldn't show every move like taking bolts out it makes the video TOOOO long

Buddy you rock!!! Thanks for this fix.

Thank you!

Once again, your video help solved my problem of the chair not tilting forward. Thanks

Thank you for the video. I have 4 Aeron chairs all over 15 years, They all have the same problems. The cables won't move. Your video gave me some confidence to open them up and see if I can fix them

haha thank you!

Somos muchos con ese problema y otros más de este modelo de gimbal y lo malo q el servicio técnico no soluciona nada y te sale un dineral enviarlo a países lejanos saludos

Waste of 6 minutes

Thank you for this! Bought an Aeron. Couldn't figure out why front tilt wouldn't work properly. Took this video to figure it out, but made it a piece of cake!

Goat. Thank you

Thanks for the video. So how does it work with the new battery?

No problem---OK

Kinda kinda kinda kinda.....aaaaahhhhhh!

Was the seller US Auto Seat covers? Their bottom covers fit pretty well but that top cover is quite loose.

This was a great video on how to replace the bottom seat cover for my 1998 4Runner. I bought the covers from a different manufacturer which was made of leather. The cover had some type of small hard wooden rod stiched in as a replacement for the metal rods. It worked just like your blue strips. Thank you so much for the time you put in to make and edit this video. You saved me a lot of time and money to have a shop do it.

This was a great video on how to replace the seatback cover for my 1998 4Runner. I bought the covers from a different manufacturer and happened to be snugger. Thank you so much for the time you put in to make and edit this video. You saved me a lot of time and money to have a shop do it.

Life saver! Thank you 😊

I got leather. I dislike vinyl seat covers.

I installed this exact universal system in my 98 4Runner that does not have the factory RS3000. After I buttoned everything back up I realized I could now only lock and unlock from the fob (not from the door switches). So thinking it has something to do with the splicing into the lock/unlock trigger wires under the dash or maybe it being a $16 part? Was going to order another and see if maybe I just had a faulty unit. Additionally, the receiver box beeps on lock/unlock, but only when a door is open. If the doors are closed, not beeping. I actually prefer not hearing anything from that box, but wondered if yours makes any beeping noises?

thanks god, I almost break my lever trying to make it turn while I teared down mine for another fix, thanks thousand

Thank you so much for this 🙌🏻🙌🏻

nice job and video, you could have removed that plastic inner tub; it's meant for when installed on PEX.

i have this problem but on the Remastered version.

Simply returned

Thanks man

Thank you for this. I ordered a replacement piece on ebay that came with 2 different pieces. I assumed one of them would be the right one, but nope. I needed a "generation 1" piece that I could only find for $40+. Once I had it open I decided to take this route. Easy. Should have done it from the start and save myself $11 on a wasted purchase.

YES! Thank you for posting this video. Two years and still helping people like me.

0:19

Can you do this while the seat is in the car

Try steaming the cover.

I have a full pinout after extensively testing an RS3000 unit I purchased off of eBay from a 98 4Runner. It's on ToyotaNation as well as my KZbin channel.

Thanks solved the problem on my 7500bt in 10 seconds

i’ve got a question anyone which psu fits this because one i got didn’t fit

you weren't supposed to remove the old or original cover. lol

Will this work if the coin is not in any kind of pool? Its a new coin just launched and im trying to mine with my GPU instead of the CPU default in the QT

Hey bro what did you use to get rid of the letter on the case❤

Thank you so much! I decided to try replacing my own factory door speakers that blew out a while back and had trouble finding instructions to remove the door panel on my particular 2009 hatchback. Your video was perfect and very helpful. I'll let you know how the speaker install goes. Thanks again!

Can you replace these arms for the ones with adjustable lever?