Just commenting to say this helped me so much with my 07 toyota yaris. Both the resistor and the motor.
@Mike-ms8uq Жыл бұрын
Where do you live in Minnesota
@SanjayPatel-eb6fl Жыл бұрын
Hi, I hava a simlar problem with my Toyota Ceica St16 (1986) With the original Flasher: When turning left signal, Buzzer noise is heard. Turn right signal is working good. Already replaced the original Flasher with a new one, but then the left and right turn signal does not light up on dashboard.. Buzz noise is gone. Hazard lights working well Checked the bulbs: good shape. What can this be? I have a video taken from the noise.
@saulcruz1234 Жыл бұрын
Does this work for 00 Chevy s10
@davidgleeson1716 Жыл бұрын
Thank you!
@lukegamez4242 Жыл бұрын
My issue is that none of the lights (any turn signal, hazard, or brake lights) work. The “PWR” fuse was burnt and I’m in the process of replacing it. Is that going to fix my problem or is there something else that you know?
@TheLostboy85 Жыл бұрын
I would check and see if the fuse box is damaged or melted in any way
@mendyzisman61032 жыл бұрын
Hello, I was wondering what the name of the high way pegs that you have on the bike are. I'm looking for a pair for my bike
@walasiewicz2 жыл бұрын
Those aren't fuses behind the dash panel those are flashers my friend
@Flizzor2 жыл бұрын
Where did you order the parts from I want to find a legit trustworthy website
@TheLostboy852 жыл бұрын
I ordered them from my local Bike shop Tousley Motorsports www.tousleymotorsports.com/
@cathybrockmeyerdawson37212 жыл бұрын
Have A 2005 RAV4L HAZARD LIGHTS CAME ON BY THEMSELVES AN WONT GO OFF UNLESS I PULL FUSE OUT WHICH THEN DOESNT LET TURN SIGNALS WORK AN IF I PUT FUSE BK IN THE HAZARDS R STILL ON PLEASE TELL ME HOW TO FIX THIS ISSUE
@TheLostboy852 жыл бұрын
I would check the hazard button believe rav4’s is in the middle of the dash but don’t quote me
@ccaudillo79212 жыл бұрын
Can I ask where you ordered parts from?
@TheLostboy852 жыл бұрын
eBay was my friend for most of the oem parts unless you can find a junkyard that has motorcycles as these older bikes are getting harder to find parts
@TickledFunnyBone2 жыл бұрын
FYI, to all who watched this and have an S-10. putting a spare wheel back up into a blazer's spare wheel area and pinching a lousy trailer hitch wire between the wheel and the chassis will create the same symptoms. Check the wires, check the grounds. I purchased a new neutral safety switch (for automatics) and then found those wires pinched. I returned the N.S.S.
@Motivated-942 жыл бұрын
my honda cbr600 started revving to red lines as was riding on road then oil blew out what should i do now ?
@TheLostboy852 жыл бұрын
Kind of sounds like your throttle linkage got stuck…? That’s all I got maybe check the cabling
@ExoticPlayTactics2 жыл бұрын
My 97 Chevy blazer has this issue right now. Decided to look it up and here is this quick to the point video! Thanks so much for the info helped me out.
@nelsonjimenez71592 жыл бұрын
You the man bro !!
@anthonymcgowan22772 жыл бұрын
thank you so much
@melodypeterson86883 жыл бұрын
My Chevy S10 02 2003 is not getting any power to the fuel pump and the fuses and relays are good. Where should I start looking for a bad wire?
@TheLostboy85 Жыл бұрын
Sorry for the delay but you might have to look at doing a continuity test of the wires from the fuel pump to the fuse box not fun
@melodypeterson86883 жыл бұрын
Please help me. I have a 2003 S10 Zr2. My problem is.. My blinkers will only work if I pull to the left on the hazard switch . And my hazard will ask work only if I put the handle on the right turn signal position. I have installed a new hazard relay, to no avail. Please help me figure t what other things I can try to resolve this is issue. Thank you so, so very much(!!!!) I have a one hour drive, each way to/from work.
@TheLostboy853 жыл бұрын
Hey Melody if the hazard switch is finkey like that along with the turn signal you will have to replace the mutifunction swith since those are combined together and could be causing your issue they range from 40-70 Dollars on certain sites otherwise id pull from a junkyard
@Motivated-943 жыл бұрын
I am.just buying me first bike also it is 600F2 As well.
@Motivated-943 жыл бұрын
Wholes in the back are ment for grip bar to hold on to with back passenger.
@torevenheim96073 жыл бұрын
This kit do not look right, fits bad all over
@Dcthetruth853 жыл бұрын
Interesting now I got to look at my seat belt.
@fubarlife77763 жыл бұрын
Thank you just started watching. My 1982 citation the hazards work but the blinkers won't work, so I'm going to watch this video and hopefully it can help me!
@raygarcia4033 жыл бұрын
This video help me out thanks man!!!!
@ronnisans85073 жыл бұрын
this is very helpful. thank you
@brayandiego70963 жыл бұрын
A tip : watch series at flixzone. Me and my gf have been using them for watching all kinds of movies these days.
@dakotajad48173 жыл бұрын
@Brayan Diego definitely, have been watching on flixzone} for since november myself :D
@axelali42543 жыл бұрын
@Brayan Diego Yup, I have been using Flixzone} for years myself :D
@lukeisaac81183 жыл бұрын
@Brayan Diego Yea, I have been using Flixzone} for since december myself :)
@Wachuko-13 жыл бұрын
Old video but to make it easier on folks... Part number for the gasket is 4FM-12213-00-00 - Tensioner Case Gasket I just replaced it on a friend's 2003 Yamaha VStar 1100 Custom
@TheLostboy853 жыл бұрын
Thanks Jamie I've now also added the part number to the description :)
@evera.v.c67753 жыл бұрын
Diagrama del fusible número dos porfa
@AlphaTwin3 жыл бұрын
Just a small FYI, if the blinkers still turn on but don't blink, (my issue) it's the flasher (referred to in this video as the "fuses" behind the dash, under the radio, left of the ashtray) there are 2, one for the hazards and one for the regular turn signals. It's pretty easy to get to, and replace.
@eddierodriguez4182 жыл бұрын
I have this same issue with a 1993 s10 I wonder if that's the same?
@walasiewicz2 жыл бұрын
My turn signals didn't come on at all and it was the flasher. It can fail in either position. Sometimes you get a solid light sometimes you get nothing at all
@walasiewicz2 жыл бұрын
@@eddierodriguez418 If your fuse is good then it's gonna be the flasher behind the dashboard where he shows in this video
@silverthunder3 Жыл бұрын
@@walasiewicz did it blow the fuse too?
@juancampos88744 жыл бұрын
Hi I have one and I have problem when starts only choke all way looks like loose and if I return just Dies or when I give some gas any help please
@TheLostboy853 жыл бұрын
i had that where it would only run on choke i had to clean the carbs
@juancampos88743 жыл бұрын
@@TheLostboy85 thanks the problem was the idl6 adjuster was loose
@TEE_TIME_GOLF4 жыл бұрын
How did you bend that front frame thing back into shape?
@TheLostboy854 жыл бұрын
I used the Black bar (1 inch Gas pipe) and a lot of pulling in different directions, with someone helping hold the bike. Mine was messed up but if yours is beyond repair might want to look and see if you can find a used one
@juancampos88744 жыл бұрын
Love that engine look like a great project
@johnlloydperez64704 жыл бұрын
From now on i will support your channel
@johnlloydperez64704 жыл бұрын
Thank you sir . It help me to fix the same issue of my car. 🤩
@dannyburgess27814 жыл бұрын
Take the exhaust off make Easyer
@dannyburgess27814 жыл бұрын
Mine leaking little behide fron cylinder on top plant
@brianmason82874 жыл бұрын
I was able to get the part number off your bag it worked for my 2007 vstar I thank you very much for posting this.oil leak is fixed.
@brianmason82874 жыл бұрын
Tensioner gasket is this what you ask for when ordering? Have same problem.
@brianmason82874 жыл бұрын
I have same prob
@mattketter41364 жыл бұрын
Thank You for posting this! This was the exact same problem I had!
@davidmorgan71354 жыл бұрын
glad there people that no how to trouble shoot help me to make repairs on 1996 s 10
@steeleshoemaker51674 жыл бұрын
U just fixed my truck pimp
@mmotorcycles94974 жыл бұрын
Looks great. It’s been coming along nicely. Can’t wait to see 100% done.
@effenfish6615 жыл бұрын
just finished doing this on a 1995 s10 2wd with 185k miles on original shocks. mine were too rusted, so i used a sawzall to cut through the bottom of the nut holding each shock on. CAUTION: there is a brake line on the drivers side. if you end up cutting the top of the shock, protect that brake line (I used a piece of 1x4 wood). bottom bolts came out easily.
@ceemcs49245 жыл бұрын
Wanted to see how you put the front corn on man wow
@sigmamale1975 жыл бұрын
All that but my fuses are good. And I even replaced my whole turn signal and wiper blade handle... someone help me
@Kj-bg3iw6 жыл бұрын
I've replaced both relays and fuse on my 96 gmc jimmy but still no turn signals or cruise control but hazards work.....im stumped..help.
@TheLostboy856 жыл бұрын
Hi KJ, yours might be a lil more in depth as the actual Multi Function combination switch might be the problem but again this is just a theory or an idea...on Amazon look up "Multi function combination switch 96 GMC Jimmy" and you'll see what part i'm talking about since you said you cruise was bad as well Again this is just a guess since i had to replace this when i tried putting my new stereo in and broke the Hazard button on top of the steering column tearing apart the dash, that button killed any attempt to use my blinkers at all if you can find a pin out you might be able to test the wires by bypassing it. Hope this Helps if this is the issue you might need a special torques socket to remove the steering column covers it will be really small socket as i found out
@mistylopez42476 жыл бұрын
After replaced turn signal fuse under steering wheel now my 1996chevy s-10 blazer it won't turn over at all
@mistylopez42476 жыл бұрын
Can anyone help me out with this problem linkage isn't straight either
@TheLostboy856 жыл бұрын
HI Misty, i dont know how that would cause the car to not start, sounds like a different issue since in my Truck that fuse only controls the Turn signals and The Reverse Lights
@labeouf65836 жыл бұрын
thanks man, worked on my k5 blazer. the funny part is I didn't even have a fuse in it haha
@bravebird34856 жыл бұрын
so on my 1987 GMC caballero. every time I use my turn signals my tail lights would flash my hazards could it be the flasher relay
@TheLostboy856 жыл бұрын
Hi Austin, not to sure on your situation could be a bad Ground at the Lights. because relay's either work or they don't
@mistylopez42476 жыл бұрын
My blinkers work now but ur key over won't do anything like there is no power
@RyouConcord7 жыл бұрын
UHG, I have the same issue! Thank you so much for uploading! My fuse isn't blown, so maybe it's the relay underneath the dash.