Great work nice finish,just wondering if you know where the body kit came from web site or company name looking at rear bumper and side panels that connects to bumper.👍
@charliesautos13 сағат бұрын
Hi, the kit was purchased by the customer off a group on Facebook, so unfortunately I have no idea although they might be available on Ebay. Thanks
@TheCreativeHouseHusband12 күн бұрын
Thanks for the video, really helpful. Love the tune too, what is it?
@charliesautos10 күн бұрын
Thanks mate, sorry i cant remeber lol.
@TheCreativeHouseHusband4 күн бұрын
@@charliesautos I found it. 2050 - City lights kzbin.info/www/bejne/qqKylaWVf7akbpI
@MosesTV00017 күн бұрын
Top job, congrats!
@bazwright679118 күн бұрын
Is it possible to remove the grill without taking off the entire front bumper?
@charliesautos12 күн бұрын
From memory I do not think so.
@_Kela25 күн бұрын
Doing mine in the morning, cheers 👍
@jayroberts563226 күн бұрын
I know its a few years ago, but i dont suppose you know where the customer brought the MR ST Body kit do you? Fantasic video by the way, hats off too you.
@charliesautos26 күн бұрын
Hi and thank you, the guy said he bought it off someone who was selling them on a Facebook group for Transits.
@jayroberts563225 күн бұрын
@@charliesautos Thanks for replying, ill look into it
@ricks3085Ай бұрын
How much did you charge for this, in total?
@charliesautos28 күн бұрын
2k plus the kit
@CorciochАй бұрын
Hello, how is this vinyl finish lasted since can you tell me please? I'm seeing some reviews that it can chip and mark easily. Thanks - great job.
@charliesautosАй бұрын
Hi, it lasted very well, I personally didn't have any issues with it.
@andrewjohnson750Ай бұрын
So I dont need to fit the T5.1 slam panel? Can I fit the bumper with the lower spoiler already fitted to the bumper?
@charliesautosАй бұрын
The slam panel is the same so no need to change it and yes, you can have the lower spoiler fitted prior to fitting.
@andrewjohnson75026 күн бұрын
Thanks bumper is on but grill wont sit flush bottom of the lights and wont match up with the holes on the slam panel . Everything else lines up .
@alancaldwell6343Ай бұрын
Up for sale ?
@charliesautosАй бұрын
Unfortunately not, I'm still seriously in love with it.
@LordFlashheart1Ай бұрын
really nice, great vid
@charliesautosАй бұрын
Glad you enjoyed it
@tajudeenowodunni1683Ай бұрын
How to repair the gear box
@Nigel-vy1fkАй бұрын
Kids will love it
@stevenpayne11382 ай бұрын
Painting first would've been easier
@edwardflavel63572 ай бұрын
How much was this whole conversion?
@quasardementor84342 ай бұрын
Nice ths for info
@jackgrimes-wl8fb3 ай бұрын
So what's involved in fitting the new wings - probably the most scary part for me. (Welding/bolting?). Fog lights? Thanks.
@charliesautos3 ай бұрын
The wings just bolt on in the same way as the ones removed, no welding involved and the fog lights area direct replacement, if you did not have fog lights you will need to run some wiring to a switch inside.
@jackgrimes-wl8fb3 ай бұрын
@@charliesautos Thank you very much for such a rapid response. I do have the front fog lights. On reflection, now that I know about the wings, I'm thinking I may just replace the front wings on my T6, as I especially like the winker/indicator repeaters with the T6.1 "Transporter" detailing. It's my favourite part of the T6.1 front end. Thank you once again.
@AlexKirov3 ай бұрын
I can help with the installation of LED headlights from t6.1 kzbin.info/www/bejne/qp65hmOanaepg9Usi=rAo3rLapRb376fKI
@davidalvessantana41005 ай бұрын
Where did u buy front led ? And exhaust tip?
@charliesautos5 ай бұрын
Hi, they cane with the kit. 👍🏼
@craigturner41005 ай бұрын
Hi mate, did you sort out the radar problem? Im looking to swap my t6 front end also and wondering what the outcome was with yours. Thanks
@charliesautos5 ай бұрын
Hi and good question, everything is saying it's working, no lights or warning messages and when I get to close to a vehicle it comes up with the pic of 2 cars and an exclamation mark in the middle of them but for the life of me can't activate the active cruise control and as this is my first vehicle with this feature I'm not sure if I'm doing what I'm supposed too which may sound stupid! How do you activate yours?
@CarpyChris19645 ай бұрын
Mint
@Milner_THX6 ай бұрын
Loved the video.. but why the annoying unnecessary elevator muzak? I’m hard at hearing & your voice was the same level as the irritating music I couldn’t hear what you were saying 🙁
@bullraverjones6 ай бұрын
How much would this cost want mine doing
@charliesautos6 ай бұрын
You'll be looking at 2k for fitting and painting. Thanks
@KurtSmart6 ай бұрын
Did you not need to prime the box first before paint?
@charliesautos6 ай бұрын
No, I just gave it a light rub down 👍🏼
@kazmattu30627 ай бұрын
Where did you get body kit from
@charliesautos7 ай бұрын
The customer purchased it so not too sure, however I think there available on Ebay.
@lrdavies17 ай бұрын
Hi what’s the cost to have that done Thanks
@charliesautos7 ай бұрын
You'll be looking at around £1800 Thanks
@GaryTaylorvw8 ай бұрын
Hi mate, can you tell me the part number please for what you had to order from vw, I need that as well cheers
@charliesautos7 ай бұрын
Hi, the main support bracket was V7LA807699D and the bumper side support brackets were V7LA941231 and V7LA941232, hope this helps👍🏽
@poianavolante13 күн бұрын
Could u provide me a complete list of all the parts with they codes i would need to order to get it done completely?
@AkimboVermon8 ай бұрын
Is that black or dark grey?
@charliesautos8 ай бұрын
Dark Grey
@AkimboVermon8 ай бұрын
@@charliesautos cool, nice one. Just wanted to make sure before ordering, I’m going to have a go at it 👍
@AkimboVermon8 ай бұрын
@@charliesautos also if you don’t mind me asking what size do you get for the roof only or did you get a few pieces
@charliesautos8 ай бұрын
No it's just one piece so have a measure up making sure you go over by a good few inches for folding over.👍🏽
@AkimboVermon7 ай бұрын
I’ve just had a go with the trim fix glue you used, sprayed on bothe suade and the roof panel, it’s not sticking? So frustrating did you do it bit by bit? I left it 20seconds to go tacky on both then applied
@MicksLife8 ай бұрын
Best how to on this job 👍🏻
@charliesautos7 ай бұрын
Thanks 👍
@subdigidy8 ай бұрын
Hi mate, what was involved in moving that radar?
@charliesautos8 ай бұрын
Hi, you literally unmount it from it's bracket and relocate it, the wiring is long enough to reach so no problems there, you might have to recalibrate it, to be honest that's something I haven't done yet🙄
@jasonwhiteley19828 ай бұрын
This look the bollocks, the end 👍👍👍👍👍👍👍👍
@RogerSlater-n1p8 ай бұрын
Hi how did you fix the daylight running lights in position please
@charliesautos8 ай бұрын
Hi, on the ones I fitted, there was a lug on one side and a fixing screw on the other, although I have had ones that need bonding in.
@RogerSlater-n1p8 ай бұрын
Hi how did you fix the daylight running lights in position please
@charliesautos7 ай бұрын
There are different types, with these I had somewhere to screw into the plastic. However, you might find that they will need bonding in, it really depends on the lights and the kit.
@jordanpemberton23079 ай бұрын
Massive difference, 💥 where was the kit sourced from ?
@charliesautos9 ай бұрын
Hi, the customer supplied the kit however I do believe that they are available in Ebay👍🏼
@LordFlashheart19 ай бұрын
£200 for the front part is an absolute bargain. great vid also
@charliesautos7 ай бұрын
Thanks 👍
@Scottyschannelmtb9 ай бұрын
Lovely work mate 👊🏻👌🏻
@charliesautos9 ай бұрын
Thanks mate 👍🏽
@davidwake34969 ай бұрын
Looks mint
@charliesautos9 ай бұрын
Thanks
@yaroethpopelier55479 ай бұрын
Can you just replace the t6 halogen headlights for the t6.1 halogen headlights plug and play ? No need to change the wireloom?
@charliesautos9 ай бұрын
Yes you can, just plug and play👍🏼
@yaroethpopelier55479 ай бұрын
@@charliesautosawesome many thanks If these are a direct swap that means that the lights from THQ are also a direct swap Many thanks for the video As it's to mine knowledge the only video from a facelift t6
@liammillichamp9 ай бұрын
What’s the tune called??
@StickyBaldieAdrian10 ай бұрын
Looks brilliant! How far over the other side did you glue down material? I’m trying to use 4 way stretch carpet and concerned about it fitting under the door seals.
@charliesautos10 ай бұрын
About an inch should do it, 4 way strecth carpet can be a bit thick which is why it's not really the best stuff for roof lining.
@T4TipsGuides10 ай бұрын
That looks really good. I have just removed the cab roof panel from my T4. It took a couple of hours to remove all the old fabric, foam and glue and then remove the residue left behind. I am going to cover it in light grey faux suede 4 way stretch fabric with a 2mm foam backing. Well done on a cracking job.
@charliesautos10 ай бұрын
Thank you for saying, good luck with your job👍🏼
@mattbrewster127410 ай бұрын
quick question, i have the same style bumper as you, where did you get the emblem for the bumper, i can’t seem to find one that fits this style
@charliesautos10 ай бұрын
I purchased it direct from BMW
@oktayari705510 ай бұрын
ön tampon
@charliesautos10 ай бұрын
Ebay👍🏽
@oktayari705510 ай бұрын
selam ön leri nerden nasıl alabiliriz
@charliesautos10 ай бұрын
Look on Ebay 👍🏽
@oliwer596311 ай бұрын
good job
@charliesautos11 ай бұрын
Thanks
@Williamtell222211 ай бұрын
Nice truck great work
@charliesautos11 ай бұрын
Thank you👍🏻
@the_wasted_artist549911 ай бұрын
Vw are me but I'm foreshore falling In love with the new transit...
@@charliesautoswhere did you get the wings and also did you bumper come with the splitter?
@charliesautos9 ай бұрын
@coolkidz7861 I bought the wings from Euro Car Parts. Also the splitter was bought separately.
@coolkidz78619 ай бұрын
@@charliesautos Cheers for that, thinking of face-lifting a transporter I've seen for sale as it looks basic and not my cup of tea
@oliwer596311 ай бұрын
My didn’t work have you started sticking the material from bottom or from side ?
@charliesautos11 ай бұрын
Hi, it can be a bit fiddly, I started mine from the side.
@oliwer596311 ай бұрын
did you sprayed glue bit by bit or bigger areas do you maybe have email address or some form of contact where I can send you video explaining what went wrong. Thank you @@charliesautos