This was just what I was looking for to get a certain look and fit. Thanks man…..

Perfect - thank you!

What size torx bit for the wedge bolts?

SLR is a scam , I orderd the wrong size hand guard and sent it back to get the right one . They said I had installed it and sent it back . It’s brand new so my friend ordered the same thing either one of us install it was just trying to get a shorter hand guard that’s all they sent both hand guard back . Don’t ever order from this company.

Do u hAve a H3 buffer

How do I remove the wedges?

Thx for the video man..its very important an i dont see why anyone else makes videos like this

What type of muzzle?

This video could not be more perfect! All the information you want, under the b******* or commercials or side conversation or stupidity nobody wants to hear or gives a s*** about! If more manufacturers did this with their own products, a lot of people would not order their own handguards, or have to have RMA numbers and return labels sent. That being said most people are too stupid to call the manufacturer to double check and verify for 5 to 10 minutes to save themselves hours of aggravation and hundreds of dollars of their money. However you have to make everything retard proof nowadays anyway, so why should this be any exception? My point remains the same however, if somebody wants to buy your company's handguard or product, and they can go into KZbin or their website or wherever and find this detailed information in such a clean razor sharp format the chances of people spending their money with that manufacturer or a hundred times higher than winging it or guessing

would 11.7 inch ion lite work with a ba hanson 12.3 barrel with a direct thread suppressor?

I've been doing research on hand rails for my 12.5" for about 2 weeks, have lost sleep over it, have watched numerous videos, read various forums and this video answered all my questions. Great job. I'm going w/ SLR.

Do all handguards measure like the SLR handguards do? Like is a 9.5" Larue or Geissele the same length as a SLR handguard?

The only thing that could potentially cause these measurements to not work, is when using a barrel with a tape behind the threads for a direct thread suppressor. In theory, the suppressor would index slightly behind the rear of threads rather than exactly where they stop. Perhaps that 1/8 inch would be enough to allow it to clear? But I would imagine the suppressor could still contact the rail during firing due to barrel whip. I want to build a 300blk with a 7.5 barrel using SLR's 6.7 ION Lite handguard, but i also want to utilize a direct thread w/taper mount. If there was a 6.5" model of the ION Lite, I would be set. I might have to scrap the taper and just have the barrel made with a traditional 90 degree shoulder and use a QD mount. The taper is a nice addition to have due to the weight/length savings of a direct thread setup. The taper+correct torque values=very secure mounting without worry of the device walking off the end, and for folks that never take their can off, it often makes sense.

Great Video! Do all handguard companies work like this?

What length rail would come close to the threads on a 13.7" barrel? Looking for minimal space between rail and suppressor.

This makes everything so much easier! Thanks

What model rail is on the 10.5 with the 9.7 rail and supressor?

SLR is the future trust me.

Do you ever run your muzzle device inside the handguard? That seems to be where things are going

Why’s everyone talking about how the anti rotation tab holding onto the gasblock and shit?

Well I ordered a 12.25 handguard for a 12.5 barrel so I guess we will see what happens

I have 10,5 inch handguard, i wonder what length barrel i must have

where was the 15.5" handguard from?

So would a socom300sps on a 10.5 inch barrel with a warcomp mount fit on a 9.7 inch handguard? Based on the rule of thumb?

Question??? I have an 18"barrel, with a long handguard. ( I want to change that) The gasblock location is about mid barrel. I want to install sights with a gasblock, and order/purchase a shorter handguard. How do I get the measurement, or is there a standard for that barrel length, and gasblock location?

My question is.. does this also apply to AK-47’s? Or is there a difference?

This is a great video. Exactly what I wanted to see.

My handguard has the barrel nut inside it and I can’t get it out??????

Just installed on my KR-9 and fitment is solid with no play almost feels like a custom fit. Only draw back is hand-guard retainer is loose and will scratch your slr if using sling. Probably will use wrap to secure it instead of cutting

CaN iT Go ON mY cEnTURy ARmS MicRo DRaCo??? HoW MuCH MOneys $$$ wiLL iT be??

Since I didn't want to buy that special nut, I just put the thing in my vice and rotated it as hard as I could

Great video man!

What barrel should I get if I have 12.5/8 handguard?

Will a 7.5" barrel with an SLR Linear Comp be flush with a 9" SLR handguard or with this not work? Will it be Flush?

I just want to know what handguard options I have for my century arms micro Draco

Horrible lighting bad video hardly any audio 😡

does anyone know if an slr rail will fit on a noveske gen 3 upper (not the VLTR MUR upper)

So, if I have a 16 inch ballistic gov barrel should I get a 15.5" handguard?

Its level 3a so dont expect to be going to serious war with this .... it is worth the investment still for what level 3a armor is expected and intended for‼️ Thank you for the review SafeLine 🏆

Broke

It appeared that the 2 SLR devices were the only ones without or the least amount of flash from the side but I’m SLR biased. The VG6 looks great too. I’d like to see these at a lower daylight time of day.

This video is exactly what I was looking for, thanks!

Thank you! This is exactly what I was looking for.

Do y’all sell any full assembled Ar uppers 5 inch or any inch under 5 basically any micro full assembled uppers ? I seen y’all have the .556 so all I need is a Handguard and any ar lower and I’m good ?

I just got a century micro draco C39 RAS Which one and how much thanks $$

a few things: aero shell grease on barrel nut and receiver thread, (good idea to pre-stress them before final torque down), the torque wrench should be 90 degree to the installation wrench for accurate torque spec. blue lok-tie on the base of gas block set screws (never on the tip, other wise you have to torch it to get them off in the future) its a good idea to dimple them as well.

Great video........ on mute!

SLR is a go to for any non traditional handguard length. No other company even comes close to having so many options as SLR. One thing I'd personally like to see is a steel barrel nut as an option maybe for an additional small fee.

why do some people keep their thumbnail long? I've seen people that obviously trim their fingernails but just not their pinkie or thumb. Why?

This is why my next build will use a slr hand guard