I am so thankful that you left these Videos online even after you sold your business. I applied this procedure on my YM 1720D today and the tractor is running again !

very useful video for my Yanmar 2GM20F inboard marine diesel. thanks!

Did all of that. Now can't get any fuel. Thinking internal shutoff stuck closed. It was a little difficult to close then open . Now it turns a little easier. Think it broke in closed position.

Extremely helpful! I ordered some radiator hoses from you guys yesterday! Thought I'd watch other how to videos before I tackled the fuel filter. I'm good now!

I sure miss the old Hoye instead of this new thing they got going on. I guess all good things come to an end eventually

Excellent video. The explanation of all the parts, the process, and quick tips= were very helpful, and informative. I'll be doing this exact job this Sunday= and am quite confident now, because of the Excellent tech doing this job. Very, very good video. Bravo

Is bleeding the injector lines also needed when replacing the filter, or only when you run out of fuel?

On most water separators (i.e. Yanmar) there is a lock screw on top of the shut off valve. Loosening the screw allows the vale to work as it should. My sc2450 is 12 years old and I've never had a 'sticky' problem with the valve. Thus the lock screw is in place to compensate for vibration of the tractor and prevent the valve opening..."Ya think"!?!

At about the 5 :20 minute marker you talked about pulling the decompression lever. Could you clarify what you mean by that?

Ty

Good evening, I have the same fuel filter setup on the 2TNE68-DM4 Yanmar engine of my Minicar. Although this tutorial is very helpful for a "first time" filter changing approach, having change myself this filter several times in the past, I have to point out 2 details that in this video have been overlooked: #1- in order to stop the fuel from coming out of the assy, you only have to turn the valve lever of 90°. if you turn it up to the next 180° your valve will remain open to the opposite position! #2- inside my filter cup there is also a spring that seats on the bottom and pushes agaist the filter cartridge by preventing it to detach from its insert. Last but none the least, there is no need in changing the whole cup and accessories at any filter replacement: it is enough to clean the sludge deposit with a cloth and rinse the cup with new clean diesel before reassembling it back.

Hello. Where did you buy your rebuild kit?

Hello. Where did you buy your rebuild kit?

Boa tarde É possível dizer a referência dos rolamentos que usou? Obrigado

Love your video very good information worked perfect thanks

Isidore part one

I am about to buy another starter for my yanmar 3 clynder

Wish your video had found me two weeks ago! I don't have those two bleed screws on my filter assembly. What to do?

Perfect

y'all need to make more of these instructional videos because there are tens of thousands who watch videos of complete hacks showing people the wrong way to work on Yanmar tractors. thank you, thank you, thank you.

clear plastic filter bowls are junk.

Great video! Very informative. Referenced many times during my rebuild

Great video! Very informative. Referenced many times during my rebuild.

Your procedure worked perfect on a john deere 650 which has a Yanmar engine, Thanks

when using the thermo start, should I remove the air cleaner?

How do I know if my starter or solenoid is bad?,thank you for your video

Poppin homey

Mine went together well, turns properly when wheels in air but binds up when I'm driving...doing my head in ...any ideas

Do you have the part number for the shims

You only need to turn the shut-off valve 90 degrees to stop the flow of fuel. By turning it 180 you left it open.

Excellent video, thanks so much for your help!!!

what part # is your 2 pice shaft

Did not let fuel bow fill up before trying to bleed not won't start

Great video! I am replacing my 1988 JD 950 steering box with an orbital control box made for power steering. The box you are working on, can you tell me if the mounting plate on the bottom of this box is rectangular or trapezoid? My box is narrower at the back towards the seat and longer towards the engine side by about an inch. The person who is making my power steering components wanted to know and I wasn’t quite ready to disassemble my steering yet in order to make him a template. I just saw your video was 12 years ago. Hope you have an exceptional memory! 😀

How did you get that shaft out of your dash control I'm having to replace my steering on my 1700,can I get your # thanks

How many ounces of oil should you add?

i had read that some ppl say it takes oil other say it takes grease. i suppose either will work.

Looks like a ford 1700

Awesome video, extremely helpful. I spend so much time looking for this. Thank you,

i there i have a 1988 john deere 750 with a 3 cylinder yanmar i have a question how much pressure the pump needs to have to start the engine?

what is the fuel pressure of your yanmar tractor

Thank you.

This is a great video, thanks. I have a Ford 1210 and recently snapped the steering shaft. It’s happened a couple of times since. This will hopefully make my rebuild more accurate as I had done one or two things wrong. Has anyone else had this issue? I have a front loader on it and am careful to balance the weight but it’s frustrating when it happens.

Did I miss installing the ball nut somewhere? Saw you take it out in pt.1 .

great fuel info, thanks. :)

THX!!

My gear box looked just like that, a mess. Water had seeped into the box and rusted out both bearings and the "U" shaped bearing tubes on the nut. I have a 1984 IH254 but the gear box is the same. I ordered some shims from Hoye Tractor, and the bearings and tubes from another vendor (before I saw found video). I believe the shims were made for a Yanmar 2000. I was not able to get the lower bearing race out so I just buffed it with my Dremel tool, and crossed my fingers. Now I'm back in business. I would have been working in the dark without these videos.

That steering box looks the same as used in the John Deere 950 and 850 tractors which were made in Japan with a Yanmar engine. Do you know if the Yanmar steering box interchanges into the mentioned John Deere tractors?

This looks like same box as on a John Deere 950 tractor. Do you know if it will interchange?

A man with experience is a rich man full of knowledge, thank you for sharing it. Frank.