2 жыл бұрын
Пікірлер
@kencoldman Жыл бұрын
Embarassed Kickstarter backer here Yaw 2s dirty little secret everyone says we've been scammed. Since we aren't KZbinrs or giving them money now. Were just the ones that helped get this started and probably won't ever get what we paid for only empty extension promises. Now new buyers don't even have to pay before they send it out. I'm sure a lot of us would be willing to pay the difference to get a unit. I'd even accept a partial refund. But this is the way this company treats the people who made it all possible.
@VRSimWizard 11 ай бұрын
Ken, I hear ya. I feel your pain, and understand your frustration. My only disagreement is on your characterization of this being a "scam". That implies deception and dishonesty on the part of Yaw VR, and in my opinion, this isn't accurate. Oh, and I don't know that "everyone" is saying they've been scammed. I have come to know Zsolt and his team personally and professionally over the past couple years. They are talented, genuinely honest, well-intentioned, good people, trying to do their best to bring a great product to their loyal backers and customers. Question their management; doubt their effectiveness as business people; disagree with the decisions they have made; get angry with empty promises; IMO, that's all fair game. I'm pretty sure they'd agree they haven't succeeded anywhere near as well as they originally had wanted to, or had planned on. However, and FWIW, I can almost guarantee there is nothing sinister or deceptive going on here. I know it might feel like that sometimes, and I also know growing frustration can often land on these things first, to explain how so many promises have gone unfulfilled and deadlines have come and gone with no results. I hope your pledge is fulfilled soon. The silver lining for you is, when you do get your Yaw 2, it will be a MUCH better product than those delivered over the past two years. When it works, the Yaw 2 is genuinely amazing, and unlike anything else in the mid price range motion simulator market.
@kencoldman 11 ай бұрын
@VRSimWizard Scam might be a harsh word. But they made a lot I mean a lot of money (oculus kickstarter money they even went above and beyond and later gave original kickstarter CV1s as appreciation for helping them get started) and they (yaw2) produced how many kickstarters? What percent? 10% maybe, I believe you that there probably weren't bad motives at the start. I really do hope that they get a sim to us. Even if it is my grandchildren that can play on it. I was going to try to start a YT channel with it. But now I'll be going the DOF Reality or the wood DIY route, not sure which. If that channel gets any traction, Yaw might even show up at my door. Maybe the only way to get one. Will the machine be better it better be for the millions of hard earned dollars they received that they ran out so fast. I understand the pandemic, chip shortage, and inflation played a role in their hardships. I truly hope the best for them and hope they'll eventually be able to get to my KS# 😆
@dajouxeric1719 Жыл бұрын
SIMULATEUR SYMPA MAIS TROP COMPLIQUERE A PRGRAMER POUR DCS
@JohnVanderbeck Жыл бұрын
How the hell did that mouse stay in place during the outro lol Figuring out what to do with my mouse has been one of my biggest challenges with the Yaw2. I simply can't put everything on my HOTAS especially in MSFS when flying something like a Airbus of Boeing airliner. I need the mouse.
@VRSimWizard Жыл бұрын
LOL. That trackball mounts to a magnetic base, and I have the base attached to several disc magnets that are stuck to the side mount table with double-stick tape. It's pretty secure.
@JohnVanderbeck Жыл бұрын
@@VRSimWizardOh it's a trackball? Wow looks like a mouse haha. Nothing like my old school trackballs. Maybe that's a good compromise, though I don't care for trackballs. Better than not having it at all though! I've been leaning on Voice Attack more recently but the amount of time I spend digging for sim variables to be able to bind things gets really frustrating.
@VRSimWizard Жыл бұрын
@@JohnVanderbeck , VoiceAttack is stellar, for sure. The trackball is easier in a motion platform as it (normally) doesn't move, plus I hate when I run out of room for the mouse. This is a Logitech MX Ergo trackball; pretty high end. My son got it for me one Christmas: a.co/d/6EqIetF
@JohnVanderbeck Жыл бұрын
@@VRSimWizard Yeah looks more ergonomic than my "classic" style trackball. Might give it a try. The mouse is the ONE thing I don't have any answer for right now. Keyboard I got the MT clamp so that's fine (though I need to find a keyboard that fits better as mine is really loose right now) and today I managed to get the left/right MT chair mount bases to mount onto the Yaw2 is almost the ideal spot, so I can expand out on those mounts. Unfortunately nothing I can really do about the center and the MPS-1 is the long term answer there, but I'm going to contact MT next week maybe and see if they will work with me on some custom parts. I do believe I can get a profile mounted across the front of the platform with a little work. I need to do this because the "center table" mount is beyond garbage for me. It is just unusable for a yoke which is what I want, well at least a GOOD yoke. My Honeycomb Alpha needs a decent force to push and pull and the way the center post hinges in the middle, no matter how much I clamp that down it inevitably bends on me in the middle of a flight after some time :(
@erwumme5732 Жыл бұрын
What is the difference between pro and Arcade Edition.?
@sheldonnorton9035 Жыл бұрын
Do you recommend the YAW2? Does it get old or is it worth the $. Thanks for your time!
@VRSimWizard Жыл бұрын
I absolutely do. It's a beautiful design (important with others in the house). It has market-leading ranges of motion, too.
@tobydz Жыл бұрын
Did you ever resolve your issue @miltongonzales7539? Only half my lights are working as well.
@Hakeem597 Жыл бұрын
Its a shame....only had this for 3 days and it has stopped working....awaiting contact from Yaw.....
@VRSimWizard Жыл бұрын
I hear ya. I've seen Zsolt hanging around the Yaw 2 Facebook page recently, and I know they're incorporating a new trouble ticket tracking system. Good luck!
@adwbkk Жыл бұрын
I have to say what a disappointment it has been to finally get my Yaw2 3DOF I ordered over a year ago only to find that it is incomplete and damaged. It was not damaged in transit. it was simply poor craftsmanship and lack of any quality control. I ordered the unit with casters (wheels) however they shipped without wheels and charged me for the wheels which I had to pay import duty on. They now say the wheels were not safe so thay have been discontinued but they did not bother to let me know about this. Nor have they made any mention about compensation or refund. The base plate on the bottom platform was severely damaged due to overtightening or something similar. They agree and have said they will ship another one, but they have not said when it will arrive or how I should go about fixing it when it arrives. Next problem is that after assembly there are only 2 DOF working, pitch and roll. Yaw and the chair lights are not working at all. The response from YAW has been incredibly uncaring and unprofessional. Email replies to my questions give only the most basic information regarding possible solutions. The answer to the yaw DOF not working was "after you disassemble try pushing the connectors in and see if that helps" This company has taken a good product and are now killing it. Do not buy from YAW they are the most unprofessional company I have ever dealt with. You will not get what you order and whatever you do get will be faulty.
@VRSimWizard Жыл бұрын
That IS disappointing. I know there have been a lot of issues with incomplete shipments and damage, both from the source and shipping. In addition, the design hasn't stabilized yet, so there are issue relating to configuration management. IMO, the Yaw VR team remain well-intentioned, but they still fumble the ball far too often. Some issues might be from language and translation, but to put it simply, many come down to bad business practices. I'm sorry you have been dealing with this, and wish I had an easy solution for you.
@Hakeem597 Жыл бұрын
The Step 1 is confusing... you state to mount legs on the base platform...however the instructions is showing the legs being mounted to the rotational platform
@VRSimWizard Жыл бұрын
Probably my inconsistent terminology. For a 3DOF Yaw 2, the base IS the rotational platform.
@bigbangerz5856 Жыл бұрын
Really helpful thankyou for that. How feasible do you think it would be to centre mount the joystick lower with a stick extension?
@VRSimWizard Жыл бұрын
Very feasible. In fact, stay tuned to this channel. I am in the process of mounting a VKB Gunfighter III w/ Ultimate Grip and a 200mm extension. I should have it posted by the end of next week.
@88Spint Жыл бұрын
Omg that answered so many of my questions :D
@88Spint Жыл бұрын
I'm so giddy watching the results :D Why, oh why can't I just win a ton of cash right now... xD I am really curios as to the cable solution for a 360+ spinning setup as I haven't seen anyone really talk about it. Don't really have a bunch of wireless stuff to mount on it... how does it work?
@VRSimWizard Жыл бұрын
The Yaw 2 Pro has both a power (a/c) slip ring and a USB slip ring, both with "hubs" to allow multiple devices to be plugged in. The USB hub design on my Yaw 2 isn't the best, so I've added an external powered USB hub. These two things solve all the wires except the VR HMD cable, and I replaced my previous HP Reverb G2 with a Quest 2, running Virtual Desktop over a separate WiFi 6 network dedicated only to the Quest 2.
@88Spint Жыл бұрын
@@VRSimWizard thanks! Bit of a shame not having a hdmi or display port as it limits 3dof to wireless displays or headsets. Well by the time I'm ready to order my own that might have changed, or i will have to invest some more in a wireless solution. My poor poor wallet haha!
@VRSimWizard Жыл бұрын
@@88Spint , Yaw VR had originally included an HDMI port, but the Mini Display port slip ring was way too expensive, and very few HMD's are HDMI only. Agree: this ain't a poor man's hobby, unless you're poor AFTER you buy everything! :)
@88Spint Жыл бұрын
I feel like the center stick mount could fit with a little metal file work :P
@88Spint Жыл бұрын
You honestly have some of the best camera work I have ever seen :D Wonderful work!
@VRSimWizard Жыл бұрын
Thanks. I've been a contract photographer and videographer for USA Today for 15 years. It's been my side gig.
@88Spint Жыл бұрын
This is very close to my dream setup. Will take a few years but just knowing that it's possible is awesome! :D
@Hakeem597 Жыл бұрын
Dennis you have a great radio voice!
@VRSimWizard Жыл бұрын
Hah, thanks. Used to do some voice over work in my youth, but not so much anymore.
@TitaniumDR1 Жыл бұрын
Finally getting to the chair mounting today. Again your video saved my bacon because I was wondering how the seat slider pan hooks stayed in position. Boom! Front bolt shown on your video. ✊🏼
@VRSimWizard Жыл бұрын
Glad it helped you out!
@TitaniumDR1 Жыл бұрын
kzbin.info/www/bejne/Z6LSg6qMjb57hLs Yaw2 build.
@TitaniumDR1 Жыл бұрын
Check out my latest video. Same stuff with a JEGS seat. I cannot thank you enough for this video. You saved me hours of pain. Thank you. I mean it. ✊🏼
@VRSimWizard Жыл бұрын
You are very welcome. I made the video to help folks like you.
@TitaniumDR1 Жыл бұрын
Attention monstertech, I almost bought this chair for my yaw2 but I didn't because I don't feel like drilling holes and such. Might not be a bad idea to create a little kit and market the hell out of it to Yaw customers. This chair is probably the overall chair of choice, but it will not sell well for YAW2 if it's not a bolt together system. I'm going with a real racing seat instead . A JEGS lowback poly with a jegs 5 point harness. Hard, light, low. Hard: to transfer the butt kicker vibrations better, light: to slightly lessen the strain on the motors, and low: to allow for VR head spinning in DCS. Once I get it running I'll put a video up on my page.
@VRSimWizard Жыл бұрын
That is the precise reason why MonsterTech provided the seat to me: to figure out which changes need to be made to allow the MPS-1 to be as close to "plug and play" as possible. Now that they have the information, I'm sure they'll look at how they can accomplish this without creating a separate SKU for only the Yaw 2. In reality, they'll only need to add two additional holes, with threaded metal inserts, forward of the two I used, to eliminate the need to drill, and to move the two extrusions farther forward for users not employing the center stick mount (which I used to provide support for the front of the seat assembly). Ideally, they could add a set of 4 new holes close to the front of the seat, but just aft of the center stick mount. The second interference I found would only require a simple redesign of the 3D printed caps on the 80x80 (mistakenly called a 40x40 in my video) extrusion that mounts to the bottom of the seat back to resolve.
@JohnVanderbeck Жыл бұрын
In the same boat. Willing to buy it if I knew I won't need to DIY it. I have their older "Office Chair" setup and would like to be able to port over my chair mounts.
@TitaniumDR1 Жыл бұрын
I just uploaded a video on my channel of my unboxing. You can see exactly what I all got in my order. It looks like they call that big black metal plate a "seat". I thought I was ordering the LED chair thing. I ticked every box on the order form so I thought I would get everything. I did not get the padded LED portion of the chair. Butt pad and the back rest aren't anywhere to be found. I was actually toying with the idea of mounting a legitimate fighter ejection seat if possible. I have two butt kickers and a HF8 haptic chair thing to adapt to this. This is going to be an adventure in frustration getting this thing all set up. It's not the assembly so much as it is dicking around finding a seat and rigging up the aftermarket DIY aspects of the butt kickers and keyboard mounts and stuff like that. Then you got to do all the tuning of the chair to the games. Then go master DCS on top of that. 😳 The chair itself is no big deal to put together. At least that's the way it looks to the eye and after watching some videos. If anyone's curious they can go on my page and kind of see a progression of what I have been building over the last few months. I keep upgrading everything. Went from desktop x56 hotas 3070ti oculus setup to a OC'd i9 4090 yaw2 pimax 8k setup. If I can get this yaw2 chair situated this should be quite the setup. Now if Pimax would just hurry up so I can trade in the 8KX for the 12K. Kudos to Pimax for having a full price trade-in policy. ✊🏼
@VRSimWizard Жыл бұрын
Be aware that a real ejection seat is gonna weigh quite a bit. I recall trying to pick one up back in my USN student aviator days, and I needed the help of a fellow stud pilot to slide it out of the way during our flight physiology course. I have installed a MonsterTech MPS-1 Blackbird sim seat, and it's as close to an actual ejection seat (honestly, not that close, but still the closest). Video on my channel. Are you a member of the Yaw 2 Discord? I understand the frustration that integrating what is a "low rate initial production" product, but the Discord is the place to get help to soothe frustration.
@TitaniumDR1 Жыл бұрын
Did yours come in three boxes? I got mine like two days ago and I haven't opened the boxes yet. But I cannot believe that the whole thing fits in those boxes. Wow!. I'll get to it this weekend!!!!
@VRSimWizard Жыл бұрын
I'm pretty sure they've changed the way the units are being packed since I got mine. Is yours a 2DOF or 3DOF? Did you buy the seat, or have one of your own? I have an unboxing video on the channel that shows the 3 boxes I received for my 3DOF unit with seat.
@TitaniumDR1 Жыл бұрын
I bought the full Monty 3DOF with the chair. I definitely did not get a chair with mine. I am watching your video right now and I'm going to go start putting it together without the chair on it. I'm either going to get one from yaw or just put one on. I've got to say though it put a bad taste in my mouth. They are difficult to contact and do not respond quickly. They lack in the customer service department. We'll see how this plays out. I'll report back
@brent4770 Жыл бұрын
I notice these come w/o the chairs. Where do you get a chair for them?
@VRSimWizard Жыл бұрын
The Yaw 2? It can be ordered with or without the chair/seat. The seat shown in this video is the seat provided by Yaw VR. I believe it costs around $200 to add the seat, but I'm not sure. If you already have a seat, or want something other than what Yaw VR provide, you can mount almost any office or gaming chair seat. There are details on the Yaw VR web site.
@6806goats1 Жыл бұрын
Great video. Guess it's time to fast and workout to get down to the max weight this chair will handle. Not far off but it's still enough that I could see breaking it apart. Or maybe they'll come out with the "Fat Bastard American" version. But I work overseas and getting one shipped to my current country and then reshipping it to the US or other country would get spendy.
@VRSimWizard Жыл бұрын
Actually, for this, and other real-world reasons, I've lost 20 pounds, and hope lose at least 20 more.
@miltongonzalez7539 Жыл бұрын
Hello Dennis, sorry to bother you. I was removing the seat on my Yaw2 and yanked/ripped apart the 3 led wires that come from the unit itself. The 3 wires that come from the unit are (red, white and unshielded bare wire). The ones that come from the seat are (red, white, green). I did solder them back using logic since I dont have a wiring diagram. I did solder red with red, white with white, and green with unshielded, but the leds on the seat still dont turn on. my question to you is: what voltage should I have on these wires and what wires to test? Is it 12volts? I want to test the led strip but dont know the voltage to apply or which is positive/negative. I will also like to test the wires coming from the unit itself to check if there is power coming out from them. I noticed that the light in the back of the unit (Yaw logo) is not turning on either Maybe related), so maybe something got shorted out. The lights in the bottom part of the unit are working fine. Are there any fuses for the leds inside the unit. Again sorry to bother you but the people at Yaw havent answer my emails for a month. I will appreciate your help. Thanks
@rand0mGT Жыл бұрын
0:53 what’s happening there?
@VRSimWizard Жыл бұрын
The Yaw 2 was operating on the app here, and something wonky was happening. You'll see Zsolt restarts the app not long after this occurred. In the intervening 18 months, the app has been refined and I have not seen this behavior at all.
@brent4770 Жыл бұрын
Seems jerky for a flight sim.
@rand0mGT Жыл бұрын
It looks so flimsy it’ll break just getting on. What are your thoughts on its durability?
@VRSimWizard Жыл бұрын
This is all my opinion, but I've been on a number of motion simulators in this price range, and of them, the Yaw 2 is the most substantial and sturdy, certainly more so than something like the DOF Reality products that are "all arms and legs" with multiple actuator motors. The Yaw 2 is simpler and more robust, and has a much larger range of motion. It's built upon the success of the Yaw 1, and everything Yaw VR learned in the Yaw 1 has been applied to the Yaw 2.
Жыл бұрын
What a great help for those trying to assemble one of these 👍
@VRSimWizard Жыл бұрын
Thanks.
@karleytanner2432 Жыл бұрын
"promosm" 💦
@VRSimWizard Жыл бұрын
???
@UnfiItered Жыл бұрын
Wire tangle is going to be a nightmare.
@VRSimWizard Жыл бұрын
Most users are employing wireless HMD’s. Those, like me, with tethered headsets, are limiting yaw movement to a level that reduces cable twist. I’m also using a KiwiDesign overhead cable management system.
@UnfiItered Жыл бұрын
@@VRSimWizard the problem with wireless is the latency. Once they get to the point of minimal latency that I wouldn't notice, I'd definitely switch over.
@VRSimWizard Жыл бұрын
@@UnfiItered , sure, I understand the latency, which is one reason I am also waiting on the next generation wireless, plus I still love my Reverb G2's image quality.
@4wheeln4fun Жыл бұрын
@@VRSimWizard you can use a wireless usb setup for the hotas. thats what i use on my yaw2. here is the video explaining how. kzbin.info/www/bejne/kIWseJ-rqaatiJo. i dont notice any latency on my quest 2. i still prefer to use my pimax 8kx for pc games that im not using 360 yaw on for the fov and clarity.
@VRSimWizard Жыл бұрын
@@4wheeln4fun interesting. Thanks. I have a 13 slot powered USB on my Yaw 2, and wireless trackball and keyboard.
@IImCharliie Жыл бұрын
any chance to buy one?
@VRSimWizard Жыл бұрын
You can find out more information here: shop.yawvr.com/yaw2/
@WorldHayes-VR Жыл бұрын
nice
@VRSimWizard Жыл бұрын
Thanks
@kencoldman Жыл бұрын
My question is where is the review of the yaw 2 pro? It's been 3 months since you recieved it. I'm a KS backer and worried I'll never see my chair if I would have received mine I'd put that thing together. Was it just impossible for you to assemble with what they sent you?
@VRSimWizard Жыл бұрын
Ken, fair question. Life has taken over, and I have been spending much more time on my day job, and traveling for same. In addition, I have experienced issues with the Yaw 2, and this is delaying my review.
@Kashban Жыл бұрын
@@VRSimWizard Maybe make a short one about those issues? Could come in handy for us guys who still wait on theirs.
@bradtucker6143 Жыл бұрын
Just finished the construction of my yaw 2 pro, assembled fairly easily very little problems. I’m using SRS with msfs it is amazing!!
@VRSimWizard Жыл бұрын
@@bradtucker6143 , glad to hear it! I'm finally getting around to working with mine. Had a number of things get in the way.
@bradtucker6143 Жыл бұрын
@@VRSimWizard hope it goes well. I had to make a few trips to the hardware store for different sized screws as the provided ones were not the right size and the attachment of the foot plate was not threaded correctly but sheet metal screw’s worked perfectly. No buttkicker attachment so I made my own, and attaching my own seat took a little doing. Started right up and found my network a few “no sensor found” errors but restarting fixed that. Their game engine works with msfs but is pretty basic, but SRS works great! Get takeoff acceleration, landing de acceleration and braking and great turbulence. I felt it was worth the $52. Have fun! I’ll be interested in what you think.
@cnchobbyist991 Жыл бұрын
In the video there is a picture of the screws for attaching the roll platform to the roll slider. It says to use 8 x M6 but from own experience and also confirmed by Yaw you should use M5 screws.
@Onthebrightside_VR Жыл бұрын
Nice setup VR Sim Wizard! I like the side mount!
@VRSimWizard Жыл бұрын
Thanks. These are the first MT products I've had, and I'm impressed.
@antoniesuter3701 Жыл бұрын
Antonie here. Thank you! I like to by wan, for some tijm. Dis video helps a lot. Have a nice charismas.
@setthestandardsimracing8689 Жыл бұрын
How does a channel with only 3 videos managed to get a motion rig for free? I can't seem to get a button box or cheap shifter to test or review 🤣
@VRSimWizard Жыл бұрын
Thanks for your question. There's more here than meets the eye. Some KZbinrs are influencers, some are partners. The latter often work with the manufacturers behind the scenes to assist in many different ways and require product to assist in performing their duties.
@virtualjoker9036 Жыл бұрын
You think Yaw did this on purpose so we buy extra stuff at Amazon?? lol always a catch. Nice video, I'll re watch if and when I get this chair sometime next season.
@wulfgar9119 Жыл бұрын
Yaw II needs to get it together... package everything the first time. It's not good for customer service.
@ghoste7546 2 жыл бұрын
Hi! Nice hack to make the assembly easier. The parts you shared does help! BTW, Is your Yaw 2 has the casters for easier relocation? Can you share a video of how it works? (I thought YawVR has cancelled that already) Also I have a question. At the end of your video, you demo how to use mobile app to instruct Yaw 2 to move. When Yaw 2 move to one direction then stop moving before next motion instruction, seems Yaw 2 was "wobbling", instead of standing still as it soon. Seems the movable parts are loosely held. Do you find it this way? Thanks a lot!
@VRSimWizard 2 жыл бұрын
Thanks for your comments. My Yaw 2 does have the casters, but I haven't used them yet. I'll cover these in a future video. From what I understand, Yaw VR are redesigning the casters, as they have found the ones used are too small. Regarding the "wobble", I used the "Random" test function in the app, and this results in motion that is likely more violent than anything you'll experience in any simulation app, however, this is a powerful device, and you may experience some lifting during the most severe movement, especially rapid yaw motion. The movable parts are attached fairly securely; at least as securely as they can be, considering they need to be free to move through all 3 degrees of freedom.
@LeaseACarOnline 2 жыл бұрын
This guy is Noobifier 2.0. I almost thought noobifier started a new channel lol! What a great video for us yaw 2 owners. Keep on bringing the Content. We need this in our lives!😂
@justaguydoinstuff 2 жыл бұрын
So where do you get the 10lb plates from? I haven't seen anything anywhere about adding the counter weights. Do you just use gym plates or what?
@VRSimWizard 2 жыл бұрын
Yep, there is a 1” plug mounted behind the seat, and standard plates fit. I bought these: Yes4All Standard 1-inch Cast Iron Weight Plates 5, 7.5, 10, 15, 20, 25 lbs (Single & Pair) a.co/d/5lpZeXm
@justaguydoinstuff 2 жыл бұрын
@@VRSimWizard Thanks! It looks kinda rough in the movement. Is it smooth when you're using it?
@VRSimWizard 2 жыл бұрын
@@justaguydoinstuff , that’s just a random test from the app. In game, it replicates what’s being called for by the game’s telemetry, so its movement is limited by Physics, meaning you rarely, if ever, have such wild swings.
@picofrance 2 жыл бұрын
Damn, thanks for this update 🔥🔥💚 Amazing we are oblige to do the yaw job 😅 Community actually give us more info than their team 🤗
@VRSimWizard 2 жыл бұрын
You're welcome. If you're not on the Yaw 2 Discord channel, there is a LOT of information and assistance available there.
@picofrance 2 жыл бұрын
@@VRSimWizard i'm in, but thanks for the info 🤝😉
@eduskywalker1826 2 жыл бұрын
Hi. Thanks for the video. Can you show how the USB hub works, and what cable should I use to connect to a PC. Would be amazing if you post in the description the links of the Amazon parts you purchased. Thanks again. Cheers!
@VRSimWizard 2 жыл бұрын
I thought about adding the links for the parts I got on Amazon. Will do so in the next couple days. The Yaw 2 connects via the internet, so if it's connected, and your PC is connected, you'll be good to go. Regarding the USB hub, I haven't gotten my Yaw 2 fully up and running yet with anything other than the iPhone app.. Stay tuned for many more videos.
@VRSimWizard 2 жыл бұрын
Ok, done. Thanks for the suggestion. Dennis
@PinkGirl2242 2 жыл бұрын
Brilliant installation guide. This will help me and others. Thank you huni
@VRSimWizard 2 жыл бұрын
You are MOST welcome!
@buzzteebear7862 2 жыл бұрын
Great summary, thanks for the work you put into this! I would have liked to see/hear you mention the supporting wheels for pitch and roll, which a few users had popped out of place during shipping as well.
@VRSimWizard 2 жыл бұрын
Thanks. I addressed that briefly in my unboxing video. I had one pop out myself.
@LQban0 2 жыл бұрын
Thank you very. I hope you post an assembling video, first reactions etc. Enjoy the ride!
@VRSimWizard 2 жыл бұрын
Posted! Thanks.
@Marius-Strom 2 жыл бұрын
Great video Dennis! I've been on the internet for a while and you are the first person on KZbin that I really enjoyed watching right after one video! I will watch more off your stuff after I subscribe.
@VRSimWizard 2 жыл бұрын
Thanks! I'll be posting an assembly video soon, then some applications demos.
@MusicByNumbersUK 2 жыл бұрын
Thanks for doing the video :) As for that roller. I have a feeling they might have took it off on purpose and there's meant to be a note in there about it. I forget where I heard this though so I might just be too optimistic on that one ;) Also. I didn't see the middle plate or the side plates? Did they forget them? Thanks
@VRSimWizard 2 жыл бұрын
Those parts were in the other boxes. I didn't video unboxing of every box. Just the large crate.
@bdog7262 2 жыл бұрын
What is your backer number?
@MJ-ug5mo 2 жыл бұрын
I need this for DCS WORLD