back in the day when i got them they were specifically advertised as a draw set for prado 120. now i think you just buy the 900mm size twin drawers, and a 'wing kit' to suit prado 120. I'd suggest to contact 4wd supa centre to confirm that's accurate but that's my assumption.

If its a kings thumper max dual compressor, it should have an inbuilt pressure switch, you don't have to do anything it just cuts out when it reaches a certain pressure, which if your trigger is closed and it's not leaking anywhere it should reach that pressure very quickly and just cut out until you open the trigger or whatever again which will turn it back on.

In this video it was stock suspension but since then I have done a bunch more to the car, soon after filming this video i upgraded the suspension which was a good upgrade to do. It is quite common and easy to get near to or exceed GVM with these cars I know that.

Hi mate, yes - 1 hole is drilled and just a nut on the back of the plastic, and then got 1 longer bolt of the same thread to go into the original threaded car body mounting hole.

It was so long ago i don't remember to be honest, wood i would guess around 18mm. Attached to the handles by getting some threaded eye bolts that goes into the same thread as the handles. then another eye bolt on the shelf, and then a turnbuckle that goes between those eye bolts. and back the back just bolted to the cargo barrier.

Nope, never had any water come in there. I have since re-wired those and ran the wires just to look more tidy. I now have them come out of the left tail light and up to the roof there.

Thank you, sorry no specific plans to share, I just added modifications over time.

It's home made, google search 'kaon gas bottle holder' thats what i would buy if i did it again.

I got them from ebay

In this video its 265/70/17, and stock suspension. Since then I added a 2" lift, though that size fit just fine without a lift

@@chappelle121 Thank you

Just google 'prado 120 dual battery tray', plenty of options for this.

depending how many wires you want to run up there, the best and most popular way is probably up the side of the windscreen, you can often tuck them into the side weather strip. In my case I had so many wires i also have them coming out through the door seals which I wouldn't say is ideal.. If i did it again i'd do it neater up the front or back. Best to have a google of this and look at some pics.

carpet on the tablet is from bunnings

Mine was a home made solution, Kaon make a nice looking solution though, id buy that if it was available when I made mine

@chappelle121 it's a very nicely done at home job. I might have a go myself. Thank you

mine are not perfectly flush, but flat enough for me. The way to fix it is to put a bit of wood or a "sub floor" under the drawers to raise them up slightly so the wings can sit flush. I just didn't want the extra weight so didn't do that

Not sure on that one sorry, was in the car when i got it

Too easy thanks for the reply 🤙🏼

Its an XTM one from BCF

@@chappelle121 Thankyou

@@chappelle121 Could you advice how tall they are including the bracket as have an ARB roof rack and would like to position it in the same location, I have a gap of 70mm from the roof to the bottom of the roof rack rail

@@malkitr Face of the light bar is ~82mm, add on the bracket and that's even more, so this one probably won't fit for you in the same way I have mine.

@@chappelle121 Thanks for confirming will need to attach some brackets to the Tube bar then install.

No worries, glad it was helpful for you :)

I just went to bunnings, wondered around and just found something that would work. What i used is something called a "grunt e track fixing plate". If i was to do this again now i would just buy the kaon gas bottle bracket, google that and maybe that might be a better solution for you :)

Thanks mate! Yeah have had a look at the Kaon ones. Look the good but a bit out of my price range. How did you go about attaching the bracket to the holder, would u do anything differently if u did it again? I want to make sure it’s as strong as possible

@@liamnichol614 just bolted it, nah its fine and no need to change anything for me, plenty strong and sturdy.

Its just carbon fibre vinyl wrap, purchased off ebay or something like that and wrapped myself

Thanks mate appreciate it. Looked online after I commented and they only make the carbon fibre trims for left hand drive. Assumed you wrapped. Looks great mate. Just started setting mine up now 🙂

I don't remember sorry, but i think was purchased from ebay

I ended up killing that thumper, maybe conditions too hard in the engine. I got another an now hard mounted it in the boot. But basically just made up a bunch of brackets from bunnings and made it work - don't have it any more to give you any more info on it really unfortunately