Do you still have the extra timer assembly? seems to be the problem in my 240
@Boost-EdAutomotiveКүн бұрын
I already sent mine to another subscriber about a year ago. Those things are getting pretty hard to find
@xxreflexx33449 күн бұрын
Hey quick question saw your Nissan rogue videos I have a 2018, i recently noticed came across this issue that I put the car in drive and it wouldn’t move, I also press on the gas and the rpm’s go up but the car doesn’t have much power. Hoping you can help me out before I get charged crazy. 🙏🏼
@Boost-EdAutomotive9 күн бұрын
Doesn’t sound good. Those CVTs can have issues. You could change the transmission filter and fluid but it might be a bigger issue
@alexford521410 күн бұрын
They do have a Hyundai wiring harness now, for a 7 Pin. It's a lot of clips and nearly the entire back end removed. Works like a charm
@user-nt2iq7lx8m10 күн бұрын
When unplug the battery. The car can forget the keys coding 😮
@Boost-EdAutomotive10 күн бұрын
Luckily my car did not. I unplugged it a few times for work
@user-nt2iq7lx8m9 күн бұрын
Lucky you😊 Did you get check engine light when misfire detected?@@Boost-EdAutomotive
@Boost-EdAutomotive9 күн бұрын
@user-nt2iq7lx8m I did not get one for a while. I felt a small misfire randomly for about a year before the light came on. No other issues so I let it be until I got the light
@seanpoirier156511 күн бұрын
Thanks for the vid! Changing the brakes on my Hyundai shortly (state inspection told me they are getting worn down). Wanted to say nice tatts as well! Looks like you got Hisoka and do I see a dragonball as well? Anyway huge anime fan myself and thanks for the vid again.
@Boost-EdAutomotive11 күн бұрын
No problem, glad I can help. I have Hisoka, FLCL, Kikashi, and My Hero for anime tattoos
@3184Patrick12 күн бұрын
If you think about ditching this one and trying the EV, DO IT. I bought a 2019 Ioniq full EV and its fantastic. Up here in BC (Vancouver island) it costs me a whopping $3 to "fill" it up. I'm at 50,000km and it's been flawless. I have a blend door in the heating system that just started making noise but otherwise its great. And in sport mode will dust a v8 mustang which is always fun. But like any car im getting to the point i want to mod it so going to get some H&R coils maybe and looking at used Enkei FPF1's maybe.
@3184Patrick12 күн бұрын
Pretty funny that you have a red f100 slick and a blue Ioniq EV... i have the same but mine is a 66 not a 65 lol. I also had a 240sx a few years back lol
@Boost-EdAutomotive12 күн бұрын
We’re the same person living a different life haha
@3184Patrick12 күн бұрын
@@Boost-EdAutomotive glitch in the Matrix...
@ChrisJRSpro12 күн бұрын
I want the z32 calipers on my 240 as well and want to keep the 4 lug hubs. Are those rotors a special size? Or will factory size rotors work?
@Boost-EdAutomotive12 күн бұрын
240sxmotoring.com will have everything you need to work with the z32 calipers. You need to measure your calipers to find out what size rotors you need. There is a lot of info on all of it throughout google. Unfortunately I can’t remember all of it
@ChrisJRSpro12 күн бұрын
@@Boost-EdAutomotive thank you I appreciate it
@samtarariverasanchez5913 күн бұрын
Easier way use a 14mm long socket then use the coil pack to take them out.z
@mikedimaio123720 күн бұрын
How did it drive afterwards?
@Boost-EdAutomotive20 күн бұрын
It drove a lot better! I could still feel the shift when pulling out of the neighborhood but it definitely felt a lot better than before. Also when the transmission is warm it shifts like butter
@casca95565 күн бұрын
Where is the link?
@natseangsumat793823 күн бұрын
Awesome stand , awesome s13 coupe !
@Boost-EdAutomotive23 күн бұрын
Thanks!
@FabianVaughn-m4b23 күн бұрын
Nic vid tys
@itsmemariog25 күн бұрын
So I did this and I am having a rough idle. Any recommendations? No issues before
@Boost-EdAutomotive25 күн бұрын
What spark plugs did you use? Did you push the caps all the way back down onto the plugs and feel them “click” into place
@pumasgoya27 күн бұрын
I watched this at work with the volume down. There are two hoses there. Are they both feeds to the engine or is one out and the other in?
@Boost-EdAutomotive27 күн бұрын
One is pressure and the other is return, the extra fuel your engine didn’t use but needed to build the pressure. They are different sizes so keep an eye out
@pumasgoya27 күн бұрын
@@Boost-EdAutomotive thank you
@_Shimona28 күн бұрын
This is awesome! Congrats man. I'm looking to swap an RB25DET into a 280z
@Boost-EdAutomotive27 күн бұрын
Definitely worth it! I’ve been drifting with this car and it’s doing great
@rcthomas6925Ай бұрын
Thanks I have changed many times on my 2011 Chevy Aveo lt5
@Boost-EdAutomotiveАй бұрын
You’re welcome!
@Smallfish16Ай бұрын
Looks good!
@Boost-EdAutomotiveАй бұрын
Thank you!
@Smallfish16Ай бұрын
Where you live
@kylecheesman-t9qАй бұрын
Do I have to take the spoiler off to change the 3rd brake light assembly? Kids slammed the hatch and one of the bolts broke through the plastic mount.
@Boost-EdAutomotiveАй бұрын
Unfortunately I think you do..
@joeycochenour5783Ай бұрын
Only did one spot on the track. Same corner!! You gotta get different angles from different entry points.
@anthonyclarke021clarke6Ай бұрын
Thank you I wanna learn more
@hansenriquerach-mendoza3515Ай бұрын
Best way a magnet or a long hose fitting into the sparkplugs. You grabbed it with a long metal tool where you might damage the tip of the sparkplug. Forgot torque specs plus blowing the area before taking them out. And pre-gap check unless you bought them from the dealer.
@Boost-EdAutomotiveАй бұрын
Definitely all good points! 👍🏼
@thunderstruck139217 күн бұрын
Had the same thoughts!
@svenpflug1679Ай бұрын
Love the frenchies talking hope mine does the same when I get my saltwater up and going
@Boost-EdAutomotiveАй бұрын
Saltwater will be awesome! I eventually would like a saltwater tank or a Niger Trigger. My wife really likes that fish
@nicholaslower9451Ай бұрын
You got it bud! Love seeing you still out here!
@mickeybreland53Ай бұрын
Thank you for the information. Great Video!
@Boost-EdAutomotiveАй бұрын
Thank you for the feedback!
@delaney4708Ай бұрын
lmao i use a soda bottle to cover mines.. but for my external wastegate the valve is shut so even if water gets in there when the car is warmed up i do a few pulls to get rid of the water it either evap or gets sprayed out at WOT
@Boost-EdAutomotiveАй бұрын
I got rid of my hood dump a few weeks ago. 😫
@delaney4708Ай бұрын
@@Boost-EdAutomotive I'm never getting rid of mines
@Boost-EdAutomotiveАй бұрын
@@delaney4708 I needed to in order to pass a local track tech
@delaney47089 күн бұрын
@@Boost-EdAutomotive I'm in Jamaica personally I don't give a fuck lol
@Boost-EdAutomotive9 күн бұрын
Nice! We have a lot of tracks here but some people don’t like us for some reason and they are trying to shut down all the tracks
@codypennington9406Ай бұрын
Did you pull out a 4.3?
@Boost-EdAutomotiveАй бұрын
Yeah, it was a seized up 4.3
@shonagallagher5329Ай бұрын
Kinda stoopid why u don’t show how to do the one u said was hard smh
@Boost-EdAutomotiveАй бұрын
I apologize, just gotta wiggle and twist a little
@trinca5826Ай бұрын
Did you use the stand ,where is the follow up video bro
@Boost-EdAutomotiveАй бұрын
Check my playlist. It’s in there. I can do a KZbin short of the current state it’s all in
@trinca5826Ай бұрын
@Boost-EdAutomotive thanks bro, that stand looks awesome, I wish u went in a lil more detail about the set up inside the tank as far as the electrical and stuff cause ima use your video to make a stand for a 75 gallon
@LosSSАй бұрын
If only I could fix my carbon fiber lip, I cracked it when I was taking the bumper off. Good stuff man!
@Boost-EdAutomotiveАй бұрын
Thank you! Are you painting the lip? If not idk how you’d make the repair look good
@VovanCBRАй бұрын
any reason to keep order on coils?
@RedPanda_00806Ай бұрын
Why not a standard alignment ( camber,caster..) in a car repair shop?
@Boost-EdAutomotiveАй бұрын
The rear camber cannot be adjusted with factory arms but it had negative camber so I installed these to get adjustability for the rear and they were able to make it 0.
@RedPanda_00806Ай бұрын
@@Boost-EdAutomotive I own a 2020 Ioniq Hydrid ( last manufactured) it has a negative rear camber from factory and I found out that most of the UBER here are Ioniq and most of them has this problem, so, it can't be adjusted with an aligment? why few of them has a good ajustment?
@Boost-EdAutomotiveАй бұрын
@RedPanda_00806 I couldn’t tell you. I thought it was weird too. I loaded my truck with my tools when I changed jobs and I thought that might have caused the camber but when I looked it up it seemed to be a common issue. Luckily these arms have been produced and can be adjusted for better alignment and tire wear.
@spencermuir6645Ай бұрын
Took my car in and they were going to charge $90 for it! Instead, I bought a filter on Amazon for $9 and followed this video for instillation, thank you so much!
@TheGuccibaneАй бұрын
Skunkworks had the same idea... oh wait. Edgy = great marketing in 2024 is the unfortunate reality
@Boost-EdAutomotiveАй бұрын
Things may change. I’d rather get some quality builds out first to speak for me 🤙 people I talk to are tired of clickbait and actually want to see relatable work
@TheGuccibaneАй бұрын
@@Boost-EdAutomotive Jokertech without a Z actually sounds amazing
@Boost-EdAutomotiveАй бұрын
@TheGuccibane too late! I already opened an LLC for Boost Ed Automotive
@brianbrown2207Ай бұрын
would love to c a custom canopy on it
@DaysofPainandVictory2 ай бұрын
Nice, we made ours an LLC a couple years ago, there’s a lot of perks running it as a business that’s for sure!
@Boost-EdAutomotive2 ай бұрын
Yeah I feel like it’s the move I needed to make.
@LosSS2 ай бұрын
👍👍👍 got anymore of those shirts 👀
@Boost-EdAutomotive2 ай бұрын
I just might. Send me your shirt size and address on instagram
@ricardopulgarin61762 ай бұрын
i want one for my fd. where did you get it?
@Boost-EdAutomotive2 ай бұрын
Check eBay out and google. Going to have to search pretty good as they are getting hard to find
@IloveMetallicA42 ай бұрын
Should start a part time gig welding.
@Boost-EdAutomotive2 ай бұрын
😂😂 I’d have to pay people to work on their stuff lol
@TripasGarage2 ай бұрын
Nice video! Quality is superb
@Boost-EdAutomotive2 ай бұрын
What about the camera mic at the top? lol this video was absolutely shit compared to what I had planned but it takes so much time to set up all the cameras perfectly and catch every moment. I always ended up overworking and not recording anything. But thank you so much! I’m glad the videos show well. We’re our biggest critics lol
@wgc3832 ай бұрын
Rattle can paint job?
@Boost-EdAutomotive2 ай бұрын
Engine bay? Yeah, did it back in 2013. Different times haha
@hoselrocket20012 ай бұрын
Did you ever worry about any of them breaking while pulling them out? Saw a guy in another video crack the porcelin and then end up with hours of stress trying to retrieve the pieces.
@Boost-EdAutomotive2 ай бұрын
I think I didn’t have a plug socket small enough for those and with a full time job and a family this was the only time I had to record the video haha let’s just say I got lucky nothing cracked!!!
@DaysofPainandVictory2 ай бұрын
Dude I just found your channel because I picked up a vortec for my 79 Jeep cherokee, watched most of your swap, then saw the Washington plates, then saw the Cheney trash can haha, I live in Cheney too! We'll have to do a collaboration sometime!
@Boost-EdAutomotive2 ай бұрын
That’s awesome man! I have a full exhaust being made for the s10 and then will be getting it tuned. Should be on the streets by fall 🤞🏼
@xdubzx69422 ай бұрын
Does your bike get to about 27mph and it just kinda stops accelerating like there is something stopping it? My bike feels like it wants to go another maybe 5 mph but something is restricting it. When im at 27mph wide open throttle itll be kinda jumpy like there is something restricting it from going any faster. The carb is good, the clutch is fine i think. Im lost lol. First mini bike ive had since i was 10 and i know this bike dont feel right
@Boost-EdAutomotive2 ай бұрын
Did you extend the throttle restriction screw like I did? I can get up to 35 or so but I’m only 150lbs. I heard there was another thing to adjust to get more out of it but I haven’t been able to look
@xdubzx69422 ай бұрын
@@Boost-EdAutomotive yes I did
@xdubzx69422 ай бұрын
@JoKeRTechz and I weight just about 140 myself so I'm questioning why can't I get to at least 30 like most people
@Boost-EdAutomotive2 ай бұрын
Look for me on Instagram Jokertechzz and send me a video of you opening the throttle all the way both the handle and the lever by the motor
@xdubzx69422 ай бұрын
@JoKeRTechz so I totally forgot I disabled my Instagram like a year or so ago. I tried making another one and every single password I try to use Instagram is saying it's "too easy"
@endowg2 ай бұрын
These plugs have specs torque. 15 to 21 lbs.
@Boost-EdAutomotive2 ай бұрын
Good looking out. I’m just showing how easy it is to do the job. I didn’t research all the torque specs and other caution notes.
@IloveMetallicA42 ай бұрын
Nice cars!
@Boost-EdAutomotive2 ай бұрын
Yeah, another good turn out. I only got one video of my car 😩 again to busy to want to slow down and set up
@IloveMetallicA42 ай бұрын
It's Alive!
@Boost-EdAutomotive2 ай бұрын
Dropping it off this weekend
@craig5592 ай бұрын
Gonna give this ago been looking for a stand 2 meters by 35cm to fill a wall I only have 2 40 litre shallows tanks so I’ll be fine weight wise