Question if you don't mind me, does this guide also work with Jellyfin or no?
@JeffComputerServiceКүн бұрын
@@Nuashi5 thanks for watching and Yes it does I don't have the same tutorial but a similar one in my videos check it out 😁
@Nuashi516 сағат бұрын
@@JeffComputerService Amazing!! Thank you so much for these videos, you are a life savior (:
@joey06184 күн бұрын
what are pools ? I hate when someone says they will show you have to config or setup a program, but went ahead and already did other things that ar eimportant in the setup. what is the screen ont he right ? another machine ? or same machine. im a beginner so this is not helpful \
@tariqalbedwawi86138 күн бұрын
I am confused if you can help me, I want a family who live far away to stream my movies, but I hear NAS is better for your network not really for remote access specially for 4k huge movies, does that mean I better buy a high end pc so the transcoding is better for remote 4k movies ?
@JeffComputerService8 күн бұрын
You don't necessarily need a high end PC to do the process depending on your needs if you want your family member to be able to have access to the server they need the device that they want to connect connected to the tailscale app if it's for the TV the app is also available for TV at least for me using tailscale to access the movies I don't have any difficulty with buffering the movies or waiting to load not all my movies are 4k and works pretty well For you family member to connect give them access to your tailscale account or invite them and give them permission so they are included on your tailnet (tailscale) Another thing to note is you can also make the process on a virtual machine instead of a NAS depending on what other apps you want to install but if all that process is too difficult to do then making a true NASA Scale might be the best option for you for flexibility Hope this helps 😁
@cyrilpinto4189 күн бұрын
Couldn’t get other users ti access the service; perhaps you could do one.
@JeffComputerService9 күн бұрын
@@cyrilpinto418 those other users did you added their computers or devices to your network in this case, the tailscale Network They will need to install the app on their devices Hope this helps
@cyrilpinto4189 күн бұрын
This is my setup Proxmox with OpnSense; installed Tailscale with Advertise Router being my Caddy VLAN. The Caddy VLAN provides access to services such as Jellyfin within my home, as I don’t permit devices to access services using a IP address. After setting up TS on OpnSense and then in my IPhone everything works; ie I’m able to access my services even though the Advertise Router is only the Caddy setup / VLAN. I did an Invite User and my friend was able to setup Tailscale and I can even see him Connected on my admin console. My services such as Plex aren’t accessible.
@JeffComputerService9 күн бұрын
@@cyrilpinto418 I never done it that way. I would mostly just use my own account and add the device not invite the user. I'm not sure if there is a restriction by doing it like that you could try to ping the IP, the tailscale provided you. In this case, your friend to see if there is a reply. If there is, then you should be able to connect with the iP provider by tailscale followed by the port number Hope this helps
@cyrilpinto4189 күн бұрын
Since TS is integrated into OpnSense via a Security Key; I’m not going to provide them my account details as that would provide them too much access into my server. I’ll keep trying else will look into another solution. Funny thing is we’re able to setup Wireguard and he’s able to access Plex / Jellyfin; however not through Tailscale. I needed Tailscale since they need to access Jellyfin on their TV; and the only way this is possible was to consider installing TS on their Apple TV (we’re testing the iPhone for now with no luck).
@Meyus_9 күн бұрын
Soo, I am going to use this to play Minecraft with my friend, does my friend need to install tailscale too? Nevermind, I think I figured it out
@JeffComputerService9 күн бұрын
@@Meyus_ your friend needs to connect to the same tailnet (tailscale)account so his Device has access to the same network you both want to play and only you and your friend will have access and anyone else that you add to that account Hope this helps 😁
@Meyus_9 күн бұрын
Oohh thats why my port forwarding isnt workng, I spent sooo long, many hours, but only today I came to realize with CGNAT port forwarding isnt working
@Meyus_9 күн бұрын
Hey, your ip is visible at 1:12, please censor it! Also at 2:55, too
@JeffComputerService9 күн бұрын
Thanks YOU!!!
@JamieLee2k9 күн бұрын
I am unable to get this working because I need a subnet router, can you please do a tutorial on this?
@husniadil13 күн бұрын
Imagine if we install WSL2 and run a Pi-hole docker container, under the guest's guest OS. Pi-hole within Docker within WSL2 within Windows within Proxmox within Hyper-V within Windows. How can you make that Pi-hole as the main DNS server of your router?
@JeffComputerService13 күн бұрын
Add the IP associated of your Pi-hole in the DNS Settings of your router DHCP server instead of leaving it blank the DNS add it there(192.x.x.x) Hope this helps solved your question Thanks for watching! 😁
@zoeyundergroundcanada16 күн бұрын
thank you
@WeiKunTeo16 күн бұрын
My web browser said " This site can't be reached" after i copy the Tailscale IP with the TCP port number 8006. I did a ping test from Proxmox shell , Tailscale IP & PC are pingable (but PC cannot ping Tailscale IP 100.xx.xx.xx). As long as both my PC & Proxmox can reach Internet (we don't have to care about the internal routing parts). I have tried turned off Windows Defender Firewall still same. Pls advise me.
@JeffComputerService16 күн бұрын
@@WeiKunTeo hi there! From the computer that you tried to connect did you add that device to your tailscale (tailnet) ? If anything sometimes clearing the cache helps Hope this helps 😀
@WeiKunTeo15 күн бұрын
@@JeffComputerService I was my mistake, once installed the Windows client from the computer, everything works fine.
@JeffComputerService15 күн бұрын
@@WeiKunTeo glad it worked 😁
@namanjoshi252817 күн бұрын
THANKS A TON !! :) THAT WAS me, who commented on the other video of yours and wanted to apply this on truenas scale, I do not see the SERVICES, seems by default, the TNS disables the SERVICES tab, I have currently switched it on, and it says, it will take some time to fetch all the services running on my TNS, I'm hoping it will detect my Plex server running on it :) I shall get back when its a success or a failure, You are awesome !!!!
@JeffComputerService17 күн бұрын
Thanks for watching 😁 I'm glad the videos are helping 😁
@namanjoshi252817 күн бұрын
@@JeffComputerService yes 🔥🔥🙏🙌🙌 you are a saviour
@pandawamakmur500419 күн бұрын
i cant install tailscale and get this log, how do i solve this? 2024-08-24 13:37:33.824788+07:00boot: 2024/08/24 06:37:33 error checking get permission on secret tailscale-tailscale-secret: Post "kubernetes.default.svc/apis/authorization.k8s.io/v1/selfsubjectaccessreviews": context deadline exceeded 2024-08-24 13:37:33.824900+07:00boot: 2024/08/24 06:37:33 error checking update permission on secret tailscale-tailscale-secret: Post "kubernetes.default.svc/apis/authorization.k8s.io/v1/selfsubjectaccessreviews": context deadline exceeded 2024-08-24 13:37:33.824949+07:00boot: 2024/08/24 06:37:33 error checking patch permission on secret tailscale-tailscale-secret: Post "kubernetes.default.svc/apis/authorization.k8s.io/v1/selfsubjectaccessreviews": context deadline exceeded 2024-08-24 13:37:33.824995+07:00boot: 2024/08/24 06:37:33 error setting up for running on Kubernetes: Getting Tailscale state Secret tailscale-tailscale-secret: Get "kubernetes.default.svc/api/v1/namespaces/ix-tailscale/secrets/tailscale-tailscale-secret": context deadline exceeded
@afhamibrahim19 күн бұрын
For me Jellyfin works with windows but when I connect my iPhone with tailscale and try to connect to jellyfin with ip and port it does not work. On windows in works perfectly. Also I use the ip dedicated for my iPhone on tail scale and the ip dedicated for windows for windows. Idk what’s the problem then
@JeffComputerService18 күн бұрын
Thanks for watching are you putting the tailscale IP or the local IP to access the server?
@afhamibrahim18 күн бұрын
@@JeffComputerService oh yea I finally found out. I was putting my iPhone ip address instead of the server ip. Thanks mate.
@pick4life22 күн бұрын
Great video, Im using UniFi Networ as firewall any sugestions, cant make it work remote acces, thanks.
@ebrahimnalla12123 күн бұрын
help anyone! having troubles configuring jellyfin, which is a docker app on CasaOS. i want to watch shows from my IOS device. i have tailscale installed on CasaOS but that only lets me control the OS and nothing to do with jellyfin.
@firmbooty353925 күн бұрын
Whenever I enter the Tailscale ip with the plex port, it does nothing on the browser
@justinlogan70425 күн бұрын
how do you add trusted domains to Next cloud in TrueNAS?
@TheCbj7925 күн бұрын
How do you setup this whit no virtuel machine? Ore how do you set up this virtuel machine. You say B here but not A?
@JeffComputerService18 күн бұрын
Well you can also set it up on a physical machine but the main reason for the virtual machine is that, that machine alone is only focus is the jellyfin server so the good thing about that is all the resources on the virtual machine will work 100% just for jellyfin this makes it good so you don't experience lagging on the server when it loads your movies or shows
@SonYoru_YT25 күн бұрын
i cant enter the website after like some minutes
@jairoflorian980919 күн бұрын
same here, the app keeps on "deploying" state allows me to access for a while and then nothing
@JeffComputerService18 күн бұрын
Sometimes clearing the Cache of the browser helps in case your server doesn't load
@SonYoru_YT17 күн бұрын
@@JeffComputerService i used tailscale much easier but thanks for the reply
@SonYoru_YT17 күн бұрын
@JeffComputerService , I have a question: How can I access Jellyfin using Tailscale if I'm using the TrueNAS Scale IP?
@JeffComputerService17 күн бұрын
@@SonYoru_YT you need to put the IP that was given to your device not the local IP from your Router for the VPN to work
@SneakyRx27 күн бұрын
My jellyfine server not finded by tailscale
@JeffComputerService19 күн бұрын
See if you can find it via your local IP on your PC with the port number 8096 is the default for jellyfin and then after that try with the IP provided by tailscale and with the port number example (0.0.0.0:8096) How this helps
@hesshess996627 күн бұрын
in turenas core, we need a DDNS server and provider for the VPN, so in turnas scale, if we use tailscale does it means that we no longer need DDNS server and provider since tailscale will do it ?
@JeffComputerService18 күн бұрын
Well yes in theory
@Architec727 күн бұрын
Hi Jeff, I stucked on the 6:12 time of the video, Everything seems to be working, tailscale web seems to see my Truenas machine live and running, the green dot is on, but when I copy the ip address and paste it to the new window, nothing is happening and not even window open with the message not secure connection. (the message is "this web is not available"). Can you please help me with this issue, beacuase now I can control the Truenas just localy. Thank you for your advice. Architec7
@JeffComputerService27 күн бұрын
@@Architec7 thanks for watching As to your question verify on the TrueNAS to see if there is no errors logs that might pinpoint your issue The other thing I would check is if host network is check ✅ on the Tailscale setup in TrueNAS Hope this resolved your issue 😁
@Architec727 күн бұрын
@@JeffComputerService Thank you for advice, maybe I am on it... I didnt think, that you need to have install on your pc Tailscale app as sort off VPN service. Am I right?
@JeffComputerService27 күн бұрын
@@Architec7 yes exactly the computer or device that you want to use they need to be connected to tailscale app installed on your PC
@SonYoru_YTАй бұрын
i cant acces the truenas web via the zerotier ip thing
@aronpalfi7386Ай бұрын
Hello. I connected my TrueNAS server to Tailscale and the Tailscale website shows me the connection, but when I try to open the IP address, it just doesn't work. Error message: "can't reach this page" Do you have any idea what could be wrong?
@JeffComputerServiceАй бұрын
@@aronpalfi7386 the Devices that you connected to the tailnet (Tailscale) are they able to log in And also did you check the service is running on TrueNAS sometimes there might be a error log indicating what wrong You can also try to Ping the IP if you get a reply then you should be able to connect to it Hope this helps your issue
@aronpalfi7386Ай бұрын
@@JeffComputerService When I tried to ping it, I got this result: 3 packets transmitted, 0 received, 100% packet loss, time 2048ms The server shows that the service works without any problems. But thank you for your quick reply.
@PepeakaGamerАй бұрын
Any chance you can do another video step-by-step. Doing it exactly obviously. I have a apple device where you have a window. There is something I am doing wrong. I cannot see the IP address like you put it on there. It is too small and every time I go into Google to search for that. IP address it just takes me to Reddit. am using my IP address, not yours but nevertheless, the last 4 digit that are of Plex that you place at the end, I place it exactly how I think it is with the/web and still nothing happens. It doesn't even look like the page that you open on your side. Minds just show The webpage called Reddit.
@JeffComputerServiceАй бұрын
Yeah I can do an updated video of this topic it's gonna take me time but once I make a new I'll reply to this comment again for everyone to see
@PepeakaGamerАй бұрын
I am so angry with this. It is not working for me no matter how much I try.
@firmbooty353925 күн бұрын
Did you ever fix it?
@kristof9497Ай бұрын
Thanks
@user-js3yi8lo7eАй бұрын
didnt work for me fuuu, I can't figure this out lol
@hometownmedic7355Ай бұрын
just some feedback here. some people need/want captions, so thanks for providing them. however, some people suffer from absolutely crippling adhd and cant watch a video with words in the same language as the audio(i.e. contextually unnecessary captions). your captions are burned in. i cant turn them off. i cant watch your video. you're looking after some people and alienating others. people, just make your captions optional, and not in the middle of the screen(not a problem here, but while im on the soapbox). thanks for coming to my ted talk/
@JeffComputerServiceАй бұрын
@@hometownmedic7355 thanks you for that info I will keep that in mind for future videos Thanks for Watching 😁
@NeedleWorkerMoreАй бұрын
Use earbuds before you watch
@guilmmАй бұрын
Why did you check "Host Network" on "Network Configuration"? Thanks.
@JeffComputerServiceАй бұрын
@@guilmm I checked ✅ it because if you have it off you will not be able to access your server via remote
@PepeakaGamerАй бұрын
Hey, brother, I created the tale scale account. Saw the machines that I had active like my cell phone and my Mac min I could not see plex. I saw your video over and over again. I'm so frustrated I bought the Plex pass. I got my media started but I can't get it outside of my home because of this. Because of this remote access, it is not actually working, and I've done so much research and regards to port forwarding. That hasn't worked, and I really thought this would work, and I'm exhausted. I'm already tired of trying and trying and failing. I don't know what I'm doing wrong.
@JeffComputerServiceАй бұрын
@@PepeakaGamer hello again was you successful in opening the plex server via Local IP not (tailscale) to set it up? I don't have Plex pass but I think that is just for more features depending on everyone's needs
@PepeakaGamerАй бұрын
I created the account on tale scale. I added 2 devices which I can see in the machine area. But I cannot get the plex to show up on there.
@JeffComputerServiceАй бұрын
Did you added the port number of your server to see if you can access it locally?
@bjornj606Ай бұрын
I have the same problem. On my phone in the browser i can access Plex over Tailscale ip. When i try it in app with manual ip, i says it can’t find a server
@JeffComputerServiceАй бұрын
@@bjornj606 HI! thanks for watching On the app double check to see if you have enabled in the app go to settings> then Advanced make your you have enabled to (Always) on Allow insecure connections having this turned on will allow the server to be available on the app using Tailscale I hope this helps your issue 😁
@PepeakaGamerАй бұрын
Hey, brother, I tried doing everything. You said there and I could not get it to work. I am so frustrated. I watched this video over and over again to see what I'm doing wrong and it's just not panning out.
@JeffComputerServiceАй бұрын
Thanks for watching due to your issue First off Was you successful in adding the devices to the tailscale (tailnet) Was you able to log in locally on the Plex server ?
@kristof9497Ай бұрын
Thank you.
@tonyscalletaАй бұрын
Awesome guide! Thank you so much brother! 💯
@tonyscalletaАй бұрын
Is there a way when the computer boots up, it wion't require me log in in the ProxMox terminal? Thanks
@JeffComputerServiceАй бұрын
Thanks for watching!! To your question i am not really sure about that but i do know after some time passes your log in timeout due to security so don't recommend that
@PepeakaGamerАй бұрын
I have been trying to figure out how to get access to remote access on my plex. But I have not been able to, I bought the plex pass assuming that would help but my understanding is an issue with bypassing some issues with the router which looks like you just showed me how to bypass that. Hopefully it'll work for me. I have a Mac Mini, so the process is probably different. But I'm going to try it. And like you said, I do not have access to the router. Because I am currently renting a room, which means the router isn't possible for me to do port Ford so I hope this works. Now I purchased a travel router, which gives me a lot of access. But I still have to connect it to the owner's router, and nothing works. I'm hoping this works. Thank you. Now there's different ways that I can set the travel router. And I said it. As a repeater, it gives me the option to set it as a WI-FI extender or as a router. The only options is the 2 which is extender or a repeater. Because like I said, I am renting a room and I don't have the details. I need to access their router. Thank you again, and I just subscribe to you.
@JeffComputerServiceАй бұрын
Thanks for watching and Subbing! as to your question if you have your plex server on your mac mini and you are traveling the best way i would do this is by just installing tailscale on your mac mini and on your phone that way both devices will be connected to the same network using tailnet (tailscale) and all you need to do to access is, is by putting the tailscale ip given to your Mac Mini with the plex server Port Number I Hope this helps your issue tailscale.com/download/mac www.plex.tv/media-server-downloads/?cat=computer&plat=macos#plex-media-server
@JConveyАй бұрын
I did this but file transfer speeds are so slow (2 MB/s) it says I have a direct connection though. How do I fix this?
@JeffComputerServiceАй бұрын
Hi there ! about those speeds i am not sure if tailscale has some download speed limits you can check on there website i myself i am not sure
@BarakaAndrew27 күн бұрын
if doing tailscale ping <your machine> shows u have a direct connection and not DERP but getting 2MB/s it's probably not tailscale but your device, either ur network or even CPU can't handle the transfer. You can try if it's tailscale problem by using something like iperf3, try it and see what speeds u get there using local ip address.
@Malcrom1967Ай бұрын
I followed your instructions and I see that I'm connected on the Tailscale site but I I just get site cannot be reached if I try the ip address.
@JeffComputerServiceАй бұрын
Hello there, i am not sure if this will resolve your issue but i had a similar issue that i could not log in using the ip provided via tailscale what helped me resolve this was first doing a backup of my TrueNAS Scale and install it again from 0% once that is done and adding the tailscale app again and making a new Auth Key i was able log in with no issues with the tailscale ip i Hope this helps :)
@Arijit_DharaАй бұрын
is tailscale better than zerotier ?
@JeffComputerServiceАй бұрын
Zerotier is very similar to tailscale I personally prefer tailscale due to how simple it is to configure it
@Arijit_DharaАй бұрын
@@JeffComputerService I was just about to start with tailscale thanks for the help 😇
@namanjoshi2528Ай бұрын
Hi, I followed all the steps you mentioned here, after Tailscale adding my TNS, and providing me an IP, I'm not able to access that IP even from my local network, what could be the issue? it says, 'can't reach this page' , could you please help ?
@JeffComputerServiceАй бұрын
Was you successful in adding the devices to the tailnet of tailscale?
@namanjoshi2528Ай бұрын
@@JeffComputerService yea I’m able to now but not able to access plex which is hosted in true nas , could you please help here ?
@zuofu-ziv14 күн бұрын
I have the same issue, the device showed up on Tailscale, and the app is running on TrueNAS Scale, can't access the IP from local network, have you figured it out?
@namanjoshi2528Ай бұрын
hey, how can I use this with my TRUENAS scale ? as I'm running Plex, in TNS
@JeffComputerServiceАй бұрын
Hi! Thanks for watching!!! I'll try to make a video about this later on I'll reply to you again with a link once I make it
@namanjoshi2528Ай бұрын
@@JeffComputerService thanks a ton!
@namanjoshi252817 күн бұрын
@@JeffComputerService Thanks a ton bro ! I see you have uploaded a video on the same :)
@namanjoshi2528Ай бұрын
Hi bro, this is awesome but how safe it is ? when we expose this with the tail scale? let me know, as I'm planning to achieve the same drive access when I'm travelling to different country, let me know, if this can be done :)
@JeffComputerServiceАй бұрын
I have been using tailscale for a very long time and so far it has work very well and I have never had a security issues with it
@Tech-SyntheticАй бұрын
this doesn't work. I've tried everything I can think of it's not possible to open JellyFin from my phone or anything from another network
@JeffComputerServiceАй бұрын
Hi there, were you successful in adding the devices to the tailnet (tailscale)?
@Tech-SyntheticАй бұрын
@@JeffComputerService Some devices are incapable of being added, so it wouldn't be a very good solution for tvs or any device that can't use the tailscale app natively which is a good majority of how a lot of people use jellyfin.
@rodrigobarbosa6381Ай бұрын
thanks!
@MultiRanmanАй бұрын
This was a great tutorial. Thanks.
@repairstudio4940Ай бұрын
Considering ditching Cloudflare for this to access my Proxmox server... Thoughts anyone? 🤔
@JeffComputerServiceАй бұрын
Go for it 😁
@esimms999Ай бұрын
Worked. Question: at 3:47, you click on Host Network. Hovering on the little question mark beside it, it says "Bind to the host network. It's recommended to keep this disabled." Should this make me nervous?
@JeffComputerServiceАй бұрын
@@esimms999 Hi Thanks for watching 😁 No it shouldn't and Yes that's true it does say to leave it off recommended but if you leave it uncheck you will not be able to access your server via VPN using tailscale Only local Access i don't think it should cause any trouble unless you have a specific reason
@musichubchАй бұрын
i need help, it keeps making address every minute on zerotier
@JeffComputerServiceАй бұрын
@@musichubch this happened to me once I put the Access control to public I changed it to private and it didn't happen again but the address would stay there what I would do is delete the IP it got I think it's a bug from the program I am not sure Hope this helps
@YuriNiitsuma29 күн бұрын
You need to persist /var/lib/zerotier-something (Check inside the container the correct path)
@nguyenduyanhkhoa636327 күн бұрын
@@YuriNiitsuma how to do that exactly, i have the same problem but change to private did nothing