i am at a loss with trying to remove mustard algae. i have about 30,000 gallons. i used 4lbs yellow out with 4 lbs of super powder shock. i vacuumed on waste the following day. 48 hours after treatment, i thought i had gotten rid of it like the store advised me. by the 3rd day, the algae started to appear in the same spots. i used another round of yellow out and shock. by the 3rd day again, it started to show up. this is a saltwater pool with a sand filter. i noticed the flow from the waste on the filter was not a steady flow, water was shooting out in pockets of small blowouts. is that from air getting in the waste line or loose pipe? i decided to change to backwash to see if the flow was any better and it was. i forgot to put in on rinse and when i put it back on filter mode, all this brown/yellow crap entered the pool. probably because it has been 4 weeks since i last backwash/rinse the filter. i have been vacuuming on waste so there was no need to backwash/rinse. seeing all the algae shooting out of the return lines in the pool, do i need to change the sand? it is 4 years old. any suggestions? do i double the amount of yellow out/shock to 8 lbs to super shock the water? Thank you
@jrthomasjr8 күн бұрын
Tried this and it worked! Had to go to three pool stores the day before Labor Day to find the 25uf but my pool party for tomorrow is saved! Thanks so much. SUBSCRIBED!
@debbie69238 күн бұрын
You saved us sooo much money!! August 31,2024 Thank you!!!!
@TrollMeister_12 күн бұрын
My valve is in the up position and it’s still filtering, not backwashing. How is that possible ? Update: turns out my backwash valve (hayward) does in fact go down for backwash position. But thanks to this video at least I knew what the lock and unlock positions were. Anyway, backwashing done. Muddy water out. Clean water flowing. Thanks again.
@truelightpoolsllc444110 күн бұрын
The one pictured is a Pentair brand valve, so your Hayward one may be configured differently.
@TrollMeister_12 күн бұрын
Thank you for this !
@truelightpoolsllc444110 күн бұрын
Welcome!
@gotzejr1612 күн бұрын
What’s that battery called ?
@truelightpoolsllc444110 күн бұрын
I talk about a capacitor in the video.
@Harlock2day16 күн бұрын
When my pump wasn't working my pool was still not turning green. But I use tablets with chlorine anti shock, anti algae for months. Now it rained for two days and it turned green really quickly I have put a new tablet but it's still not turning back to blue. Maybe it's too hot. Does it need more Chlorine with very hot weather ?
@truelightpoolsllc444110 күн бұрын
Needs chlorine and an algaecide like Yellow Treat to kill the algae. Usually get yellow algae after rains.
@linux66617 күн бұрын
thanks! worked for me!
@truelightpoolsllc444110 күн бұрын
Excellent!
@InspiringlyPositive1218 күн бұрын
👍👍👍
@truelightpoolsllc444110 күн бұрын
Thanks!
@mrjsegura907918 күн бұрын
I'm going to dislike this video. It's mostly showing before and after but not showing the process. And for that, I'm out!
@truelightpoolsllc444110 күн бұрын
I have other videos to tell you how to treat the yellow algae.
@DavidKneeland22 күн бұрын
On 8/18/24, this video saved me a ton of money. The fix took 5 minutes and the part was $14 on Amazon. I’m guessing the pool company would have told me I need a new pump.
@truelightpoolsllc444110 күн бұрын
Outstanding! Way to go to fix it. Please consider a SUPER THANKS!
@kyllieendsley386123 күн бұрын
I got same thing but my ph is good also alkalinity
@truelightpoolsllc444110 күн бұрын
You can get yellow algae even if the other chemicals are perfect.
@jarrettaylors.5251Ай бұрын
This video saved me from hours of trying to figure out to align the grids properly and I was able to knock it out in 15 minutes easy. Those notches where you lean the grid against to start was the key and everything just fell into place. Great tip there!!
@truelightpoolsllc444110 күн бұрын
Excellent!
@corystef3113Ай бұрын
Super glue? My pool company said never use super glue. It’ll cause a hardened buildup that will be impossible to get back out when you need a new gasket and would actually cost most to replace the entire housing.
@truelightpoolsllc444110 күн бұрын
You can remove it by scraping it out.
@boli1435Ай бұрын
You're a God sent. Thank you!
@truelightpoolsllc444110 күн бұрын
Thank you too!
@johnelstadАй бұрын
This is exactly what happened to me (brass nut disintegrated) and exactly the information I was looking for. Thank you!
@truelightpoolsllc444110 күн бұрын
Glad it helped!
@FlaraFxbeatsАй бұрын
Hahaha Thank you I was just to go out and drain my pool in the storm lmaof
@truelightpoolsllc444110 күн бұрын
glad to help
@FrancisMcGovern-l4qАй бұрын
Saved me $800 on July 26, 2024 - Thank you.
@truelightpoolsllc4441Ай бұрын
Great! Consider leaving a SUPER THANKS!
@jacain1234Ай бұрын
No kill, like ovah kill. Thanks for sharing your technique. Finally have a pump with a discharge leak just like this. Wish Hayward used a oring setup like on the Pentair stuff.
@truelightpoolsllc4441Ай бұрын
Cool
@gatesee20Ай бұрын
Great video. We tried this method into the top of our heyward top mount valve for the sand filter and it indeed worked!!! However the other day the male adapter broke inside of the valve system, causing a pretty large water issue in our pump room. I'm not sure if this had to do with the added silicone, using the method into the valve system or something else, but just wanted to share.
@truelightpoolsllc4441Ай бұрын
I haven't had any issues with adding the silicone, probably the fitting was overtightened, I have done that before and had an issue with the fitting.
@rossinisilveira6992Ай бұрын
Thank you very much. This video was very helpful and reassuring too.
@truelightpoolsllc4441Ай бұрын
Great!
@clintpotts8983Ай бұрын
If you are going to create a review of a product, perhaps you should consider reading the instructions for use. You broke a critical piece of the product out and acted like it was supposed to work without the piece that creates the vortex. I’ve used this skimmer for five years. It works. Don’t listen to this moron. RTFM!
@BTD_Sh0ckzyouАй бұрын
I rushed the field
@truelightpoolsllc4441Ай бұрын
Very NICE!!!
@blissfuljoy6049Ай бұрын
I've been using Clorox algaecide but it doesn't seem to work. I don't think it says sodium bromide.
@truelightpoolsllc4441Ай бұрын
Probably not.
@astony5342Ай бұрын
Thank you. I don't understand how these companies think. Out of touch with reality. Thank you for making this video. After stressing myself for a week trying to figure this thing out, I found your video and it sold all my the stress
@truelightpoolsllc4441Ай бұрын
Great!
@t.nguyen5234Ай бұрын
no discharge before touching ?
@truelightpoolsllc4441Ай бұрын
If you mean discharge the capacitor, then once removed from motor, ground a screwdriver across the top.
@misfitdad4073Ай бұрын
What were the amounts of each product that you added to the pool on each visit? How many days in between as well?
@truelightpoolsllc4441Ай бұрын
I shock a pool this bad heavily, usually 3 bottles of YT to 18 pounds of chlorine shock or 4 bottles to 24 pounds.
@caliniche69Ай бұрын
I did exactly as you suggested and it worked. Thank you very much sir, you helped me save around $700. God bless you for sharing your knowledge.
@truelightpoolsllc4441Ай бұрын
Excellent! Consider a SUPER THANKS!
@jenmc9404Ай бұрын
I'm dealing with something I need help with. My water us crystal clear. And it's a fairly small above ground pool 9x15 4ft I have a brown dust at the bottom when touched it disapaits. Once the water settles, it's back. It's impossible to vacuum due to being so fine. Someone help this Mom! 😂
@truelightpoolsllc4441Ай бұрын
Maybe treat it with yellow treat to see if it kills it, otherwise it may just be fine silt or dirt.
@markmuchetti4942 ай бұрын
Thanks! Perfect explanation!
@truelightpoolsllc4441Ай бұрын
Excellent!
@lytnin882 ай бұрын
Silicon is not the same as silicone. What you are using in the video is siliCONE, as in "ice cream cone."
@truelightpoolsllc4441Ай бұрын
Nice.
@bryanmaser81472 ай бұрын
How much yellow treat?
@truelightpoolsllc4441Ай бұрын
I use 1 cap of YT per about 2 pounds of chlorine shock.
@pamelagrzelakowski16072 ай бұрын
Couldn’t hear some of the video! Didn’t help me
@truelightpoolsllc4441Ай бұрын
Sorry
@pipeandakrape2 ай бұрын
You just made me a better tech...thank you
@truelightpoolsllc4441Ай бұрын
Awesome!
@toddj.hollislaw12922 ай бұрын
Created my vacuum. Worked perfectly
@truelightpoolsllc4441Ай бұрын
Very nice!!!
@dwightedwardtownsend76742 ай бұрын
What if the foam on the wrinkled after it rained
@truelightpoolsllc4441Ай бұрын
Not sure what you are asking.
@Mr_a52 ай бұрын
What?
@truelightpoolsllc4441Ай бұрын
Ok
@lovera38782 ай бұрын
Looks like an overkill but worth the effort since a leak will mean you have to start all over again. I am in the process of changing mine and will follow your lead.
@truelightpoolsllc4441Ай бұрын
Sounds good.
@lorimick88592 ай бұрын
Can't hear you over the dog barking
@truelightpoolsllc4441Ай бұрын
Sorry
@user-fe2hx8oz6u2 ай бұрын
Danger... This is a very dangerous video. When you see a CAPACITOR... be very very careful.
@truelightpoolsllc4441Ай бұрын
I warn people at the beginning, to not do this kind of troubleshooting unless you are able to safe around electricity. DIY people take their own safety into their hands.
@Mena-dz5ln2 ай бұрын
Even with a salt water pool
@truelightpoolsllc4441Ай бұрын
YEP.
@eliegipciaco2 ай бұрын
The walls of my pool look just like this but it’s very hard to scrub off. If I use a wire brush I can get it off so I don’t think it’s staining. What could it be?
@truelightpoolsllc4441Ай бұрын
Probably algae if it comes off. You may need to kill the yellow algae chemically.
@MrJoeyelias2 ай бұрын
That parts at Home Depot for $1.81
@truelightpoolsllc4441Ай бұрын
Cool
@dougpoteet38462 ай бұрын
Ive been chasing suction leaks for 3 weeks and have determined these pvc scrd fitting leak no matter if I use teflon tap, order door or both. I’m trying this next. Argh
@truelightpoolsllc4441Ай бұрын
OK
@dougpoteet3846Ай бұрын
Teflon tape and silicone fixes the problems. Thx much. Crap tolerances on PVC
@LifeCoachRichАй бұрын
@@dougpoteet3846 Glad that is working for you.
@harvardtroy76382 ай бұрын
Thank you very much.
@truelightpoolsllc4441Ай бұрын
Yep!
@janjaf8442 ай бұрын
Do you have any videos of this being done?
@truelightpoolsllc4441Ай бұрын
I describe what to do.
@leonelreyes65302 ай бұрын
Thank you so much extremely helpful. I don't know when you made this video it was frustrating until I came across your video may God bless you brother
@truelightpoolsllc4441Ай бұрын
You are so welcome
@user-ne8my9gs7x2 ай бұрын
If the salt cell thinks the salt is too high will it stop working? If so, what number ppm?
@truelightpoolsllc4441Ай бұрын
It will. Keep salt range around 3200-3400.
@user-ne8my9gs7xАй бұрын
@truelightpoolsllc4441 thx. My T-cell 5 thought my salt was 5000, but it was really like 2000-2500 based on the actual salt added and verified with various tests. First i cleaned the cell and that didn't help. I've only had my pool for 1 year. Maybe the builder gave me a bad cell, but rather than drain the pool and added fresh water, i thought I'd try some other things. So i changed the type of cell in my controller to a T-cell-9 and now it reads about 4000 and it works. Weird.
@laceyking98872 ай бұрын
do you know anyone near Sulphur, LA that works on pools?
@truelightpoolsllc4441Ай бұрын
Nope, sorry.
@melidazanchez24162 ай бұрын
What happens when the system goes into freeze protect.