oww if that debris are bits of the wet belt, he's gonna have bigger problems than the turbo very soon, if the oil pump clogs or the belt direclty fails, goodbye engine

Do you know if that obd2 connector will work with other vehicles/programs such as alphaOBD that way I might not have to purchase another one

As a new Forscan user, I was having trouble in finding out how to activate the Control PID's. Thank you for pointing out the Control Icon in your video!!

Great video. Thanks from Denmark

Thanks for part 2, gives really clear idea of how to fix. What is the pin removal tool called, if not too obvious, and can this be cleaned and rebuilt

Hi, this looks like an issue that has just developed on my car. What type of cable did you use to jump lin connection, just a bit of single core copper? And also, if one side of plug terminal looked damaged, will this require repair to both plugs, male and female, how do you remove plug fixed in b pillar? Many thanks, great video and informative.

One of the best training videos I have seen... thanks

Is this what I need to do before replacing my BCM panel with a new one (Focus Mk2 2010) Thanks.

Is there one to do the alarm chirp

Does not work on a 2013 f150 eco. Battery light does not come with koeo.

Even with the special tool, my 4th one is stuck good and proper

Incredible genius engineering and explanation

how much time you used to clear the adblue malfunction light? I am also facing this concern with no code after I replaced adblue pump and NOx sensor. I have tested for 400-500 km but the light is still stayed on....

Thanks for posting this. Just serviced and fitted an HEL brakeline to the passanger side rear brake of my 2023 2.3 Ecoboost ST4 with no dramas. I unplugged the brake at the caliper just for good measure. Drivers side to do tomorrow night.

Hi I have a mk8 transit custom. Fault code p1762 clutch pedal A clutch position correlation. Live data showing clutch pedal is partly pressed when it's not. I replaced both switches on the clutch pedal. It will only start by pressing the brake. Stop start cruse control tpms not working. Any information would be a great help.

Very fine video- thank you. Does this procedure and amounts also cover for 2017 Focus 1,5 tdci with MPS6 6DCT450 gearbox ?

how you unlock immobilizer on Mondeo 2014 business edition titanium x

im trying to register but whats the invitation code

How do you get the metal plate off??

Hi. How can we get an invitation code so we can registered?

Great life saver there

thanks for the help :)

Manu thanks for your job and showing us !

PATS is such BULLSHIT! It requires TWO Factory OEM Keys to be stored for it to work. No you can not use an aftermarket garbage, it has to be real OEM Ford keys. I have three keys: one OEM and Two Aftermarket. After a PCM Swap, PATS tells me to Fuck Off as it will not accept the aftermarket keys. Off to the dealer to sell my kidney for the second OEM Factory Key.

Hello! Will this method work on C-Max 2.0 2015 redisigned model. I am from EU. Thanks mate

will this work on a 2016 version?

Hello I have a problem with a ford galaxy 2010 petrol engine, on the dashboard , key not detected, immobilizer active, engine malfunctioning, none start, fob key not opening car i need help , i have used 2 electrician who have diagnosed and promised to come back till today I am yet to see them

If it ends up being my harness, will the dealer cover the costs since I'm in California??

Can you put a link to wesr you got the multi plug connector from

excellent fix that

I had a smog test on my vehicle and replaced the sensors, I still couldn't solve the problem, can you help me? 2013 focus 1.0 ecoboost

Your a legend dude 👏 🙌 👌

Good morning. Can forscan lite on smartphone do injector coding? THANKS

Hi , working on 2021 renault clio fault while driving everything cutting out for 2 seconds engine , power steering and no dash lights , speedo rev counter etc only does it in the morning after a few minutes of driving , no codes could the bms on the battery cause this and would it be okay to disconnect this or bypass it to try it ?

If we just replace the cather/activater not the whole lock ?

Any chance of one that isn't blurred?

Hi mate need help got forscan an apparently need to replace egr which I've had off before which is no issue but apparently I need to resert values and calibrate new one any help into where I find this in.

My tailgate switch not working and the light inside the trunk not working but opening trunk with a key pilot working good. What is the problem?

Hi mate, love your videos. I used to be a technician before I became a lawyer. Now I have little time to work on my car unfortunately. My timing chain needs doing on a f10 520i n20 engine. Is this a job that you would want to take on or do you know any really good technicians that would be able to knock this job out? I’m in London and I’m struggling to find any good technicians in London. I would just do the job myself but I have no time and it would be more cost-effective for me to just pay someone. If you can’t help, thanks anyway.

Could you tell me how to get the can bus data (voltage) with forscan occiloscope please?

Thanks. My driver side centre air vent wouldn’t close. I knew there was a small link inside that can come adrift. I watched this video, popped the vent unit out and pushed the lever link back in. Reassembled and all done in less that 20 minutes 👍

Why not just make them accessible easy from the dash ?

Don’t know if you will see this, but I have the same model sync 2, on a Kuga 2016. Randomly the left front speaker will start to distort very loudly, turn off radio or car for a while and it will work normally when turned on again, after random time, it will distort again. Very annoying as even with the radio turned off, the distortion will happen with the reverse sensors and phone calls coming through speakers. Any ideas?

Congrat, nice 🙏

I am trying to understand how you can have multiple sensors on one feed and all have 5volts wouldn’t that draw all the 12 volts down to low on some sensors. I was assuming each one draws like a light bulb draws down current 🤷🏼‍♂️

This has happened on many older focus and connects too

Can you make a video of performing ACC calibration on FORScan

Do you have to do the wire or pin swap on both sides, driver side, and passenger side? Also getting an error. I’ve tried the only Fxxx-xx since I have a 4key fob, do I need to use the FC code, tried without didn’t work then I did it with FC didn’t work. on the driver side and I’m getting a short ground error on the DTC on the driver module wires I had to cut a wire and resplice it wire a 3m connector. No errors on the passenger side module just on the DDM. What do you suggest?

Do you have to do the wire or pin swap on both sides, driver side, and passenger side? Also getting an error. I’ve tried to since I have a 4key fob, do I need to use the FC code, try without didn’t work then I did it with FC didn’t work. Too much on the driver side and I’m getting a short ground error on the DTC on the driver module clip the wire a 3m connector. No errors on the passenger side module just on the DDM. What do you suggest?

Hi would the dpf cause turbo failure, As i have now had 4 turbo's fitting to my 2016 transit within 2 years.