If using one bms ideally the ballance leads should be fused in case a bad in balance between cells it will self balance
@windsbra12Ай бұрын
I just picked up 5 pf these samsung sdi batterys for 130$ shipped per battery
@supertramp7842 ай бұрын
I'm not ragging on you but I couldn't make it through your video because I hopped on here. Looking for solar options and advice and instead, I heard your whole life story
@GMI4582 ай бұрын
God job!
@RisingTemp3 ай бұрын
Takes you forever to get to the point
@baneverything55804 ай бұрын
I subbed but they unsubbed me. I ordered a used one like this. It stank like burned circuits. I complained and got a refund but they didn`t want it returned. So 2 months later I ordered a new one. It stank too. So I guess both are good. I`m wiring up the new one tonight to learn to use it. I got busbars and large 4 gauge short battery cables to wire both up to the 300ah battery. Hurricane is coming and I have 1000 watts of 12v panels to wire up.
@PLTSsederhana_5 ай бұрын
Amazing Maxwell super capacitor
@LifeFromRyGuysEye5 ай бұрын
wow omg the same thing happened to me with your nose and I went 3 times 2 and they put a nose rocket in my nose 2 and but they cauterized my nose before they put the nose rocket tampon things in my nose and I had it in there for almost 3 days but couldn't take it anymore and pulled it out and looking at your post its 2 years ago mine happened 3 years ago maybe 2 and a half I was only 33 it happened right the covid crap wow so crazy because my er doctors said they never seen anything like that before and they never said what caused it I would love to chat send me a message if your still alive and im hooking up my solar on my rv and it seems like you know a lot and would love to hear your advice
@jameskim626 ай бұрын
The wrong application for the supercapacitor. High-quality capacitors are very expensive. It is excellent for Very Quick charges and discharges such as EV/Train regeneration, air compressors, A/C, Welders, Motors, or tools; I would have used high-amp lithium-ion cells/40E.
@mlangfordoutdoor6 ай бұрын
I have the same controller so far it works as designed
@ebeskipper89047 ай бұрын
the hidden secret is the nose? O.O
@akimdenver6068 ай бұрын
Question please 👇👇👇: Can we use the capacitor bank while the charger is still plug in , in other to maintain the capacitor bank charged when using it?
@SoutheastOhioSolarHaven7 ай бұрын
Yes you can
@southernohiosolarhomestead84778 ай бұрын
Very nice unit
@southernohiosolarhomestead84778 ай бұрын
These are sweet power supplies
@louisianahiker8 ай бұрын
My question is………how many watts of solar do I need to reach that 30amp output???
@akimdenver6068 ай бұрын
How Can a 16v capacitor be connected to a 12v Battery without damaging it please 🙄🤷?
@Jon-Sen8 ай бұрын
Well it will just charge the super cap to 12v. That 16v only means that it can handle upto 16v
@titanpolus508811 ай бұрын
I've done car audio for a long time, and I recently started selling solar for a very good company in the Midwest. I really want to build a demo rig, that is 100% solar power. Meaning it can only compete outside, and in very good sunlight conditions, but I want to do the most efficient subwoofer box, subwoofer, and amp build that can run 100% solely on the sun's energy. Have you seen anybody do something like that before?
@brianclark2119 Жыл бұрын
1.2 hrs on your hour meter? You should change the title to " Why I purchased this John Deere." Now that a couple of years have passed you can do a worth while review.
@meTimetraveler Жыл бұрын
....snapped on by some crazy stuff.....lol. I bought the special tool, do not run the tool along the bottom or the film cables will be ripped. there are vids on you tube to remove the screwless covers
@douglasjordan9929 Жыл бұрын
I wanted to see the controller not to hear about your nose what the hell man
@JonOffgrid Жыл бұрын
👍😎
@anthonyrstrawbridge Жыл бұрын
Happy New Year
@benoitbenoisbenoistchaine Жыл бұрын
Volts or amps 😂.
@theliamshowblogsandchallen111 Жыл бұрын
Wind gusts were up to70 mph at my location
@wisdomsounds777 Жыл бұрын
Thank you so much for all your help!!! Greatly appreciated!!! 😊😊😊😊😊😊😊😊😊😊
@JonOffgrid Жыл бұрын
👍
@offgridwanabe Жыл бұрын
Good luck with your shoulder if they could fix old age I would go too lol.
@RJ-cc1fz Жыл бұрын
Good to hear your voice bud
@joshdudley3078 Жыл бұрын
Glad I found this
@mikebunge3010 Жыл бұрын
Make a small jumper wire with a male spade connector on each end did that on my x390 for the seat switch
@Robertchurich-t3j Жыл бұрын
Picked up my new 2023 X350 J D Sept 29 cut my grass its great mower. Can't get a X330 in CALIFORNIA.
@benkanobe7500 Жыл бұрын
How are your strings wired to each Victron? Series, SP, Parallel,...... what do they look like regarding the way you have them wired?
@RJ-cc1fz Жыл бұрын
Thought the Valence was supposed to be Lifepo4?
@SoutheastOhioSolarHaven Жыл бұрын
Yes they are Lifepo4 . 18650 cells can be different chemistry
@MrHaps-yq3nu Жыл бұрын
I have the same model, 2020, X330, 48" deck and 350 hours. I cut 5.0 acres every week, never had any problems. Runs like a champ, rather a deer! Easy to service! This is my 3rd John Deere. They cost a little more, but they are worth it overall...
@SoutheastOhioSolarHaven Жыл бұрын
Right on
@kennoman5593 Жыл бұрын
What's dudy cycle on your soldering gun ,if example if it is say 6000 you can only run it for 6 minutes at a time ! Thats why your gun is acting up and you can't solder as well!
@devincollier94294 күн бұрын
True...when mines not working too great i tighten the screws down and it fixes it. Bad connection from it wiggling around as i touch solder connections when soldering
@slipperyslope5364 Жыл бұрын
you can put something over the over hanged for safety, not a kill cow.
@SoutheastOhioSolarHaven Жыл бұрын
I dont think it will kill a cow. Because no cows are around. But I have some rubber I can strap over the ends for protection.
@BayousParty Жыл бұрын
can you post the video of it working pls i have the same one
@SoutheastOhioSolarHaven Жыл бұрын
To be very honest with you. I never put the switch into service because I ended up with an inverter that had a built in Automatic Transfer switch. So I had no need for it after that.
@BayousParty Жыл бұрын
my OCD did not let me see the whole video
@SoutheastOhioSolarHaven Жыл бұрын
Sorry man.
@jwsolarusa Жыл бұрын
Looking great brother. I am happy you making a good use of those End Clamps. Cheers
@SoutheastOhioSolarHaven Жыл бұрын
Thanks 👍
@defjamsgreen Жыл бұрын
EXCELLENT USES FOR NICE USED PV MODULES .
@SoutheastOhioSolarHaven Жыл бұрын
Yes they are!
@defjamsgreen Жыл бұрын
EXCELLENT USES FOR NICE USED PV MODULES .
@SoutheastOhioSolarHaven Жыл бұрын
Yes they are!
@JonOffgrid Жыл бұрын
👍 Nice i been working on putting up more panels on the roof
@SoutheastOhioSolarHaven Жыл бұрын
Cool 👍 Gettir Done
@frankz1125 Жыл бұрын
Looks good. I have used 2x4s ,wood screws and washers. Cheers
@SoutheastOhioSolarHaven Жыл бұрын
Yeah my first built array was 2 x 6's and the same. I know that build also.
@offgridwanabe Жыл бұрын
Looking good
@SoutheastOhioSolarHaven Жыл бұрын
Thanks 👍
@RJ-cc1fz Жыл бұрын
Glad your feeling better now. Congrats on the array upgrade. Will be watching the progress
@SoutheastOhioSolarHaven Жыл бұрын
Much appreciated
@offgridwanabe Жыл бұрын
awesome, for too tall panels I put a hinge in the middle and swing it down to do the top