Did you get full header heat shields in the box? Looks like they are not installed?
@michaelm2294 ай бұрын
I have the same exhaust however I can't get it one because the stupid torx for the brake are so tight and started to strip.... got any tips?
@rileyhebert62544 ай бұрын
Harley uses an extreme amount of their very aggressive lock tite. Try heating it up with a torch
@KarlOtterman5 ай бұрын
Just have to use a Harley approved tuner and you’re good. I was told as long as I don’t touch the internals they don’t void the warranty.
@user-uq6ow7vt7l6 ай бұрын
nice thanks for the video I just order new handle from fly Moto and the gripes and the tube from Kraus probably I will have to move the with part from the stock bar and pit on the new one
@cody36657 ай бұрын
Stage 1 does NOT affect warranty in any way. Literally just talked to my dealer about this.
@cameronbartley61399 ай бұрын
Is the pipe mount designed so you can mount the saddlebag.?
@CJCon8859 ай бұрын
Lets be honest. We hate Harley’s from the factory. By the time we get the bikes the way we want. They are mostly another brand. We could take a short cut and just buy a competitors bike and have the same bike we pay 5 times the amount for.
@jellydick583911 ай бұрын
What is the difference betwen Road Rage II & Road Rage III? Did you need any special brackets for the ST?
@stevebutton28610 ай бұрын
I believe the road rage 2 is steel.
@team8s420 Жыл бұрын
Get the gopro media mod and it will get rid of the wind noise. Or get the mic adapter and a good microphone and stick inside of your helmet. Good luck!
@ryandrumdude Жыл бұрын
I did mine using dental tape to run behind the reflector after the heat and they came off very easy
@Prometheus1979 Жыл бұрын
I don’t know why everyone goes through all this trouble. Pulled mine off with a pair of pliers. Took less then 5 min. WD40 removed the tape from the hard bags.
@lowriderST24 Жыл бұрын
For the bag mount bracket, did you have to take the round part of the OEM bracket and put it on the bracket that came with the pipes?
@TheMetalmachine467 Жыл бұрын
Ridiculous that harley voids your warranty for using aftermarket exhaust and tuner Unless you buy thiers lol
@ncf11 Жыл бұрын
Nice bike, and vids. Guts to void the warranty. Props. Looking to buy one next year, and now considering voiding it’s your fault lol.
@dannywally2917 Жыл бұрын
Which tuner is that.. I saw a few on their website! Love the setup and think I’m going to end up doing it myself!
@grantproductions5518 Жыл бұрын
Great install video! What did you have to do to secure the right saddlebag after installing the new pipe?
@rileyhebert6254 Жыл бұрын
i made a custom bracket but bassani now sells an actual bracket that works
@lowriderST24 Жыл бұрын
@@rileyhebert6254 You made that bracket?
@rileyhebert6254 Жыл бұрын
@@lowriderST24 sure did
@Mercobenz54 Жыл бұрын
Hi ! Do you feel a difference compare to stock 117 ? Thanks
@VOLTRONTONY Жыл бұрын
Hello friend, thank you for your videos, they are very helpful, could you share with me the information of where you bought your 2 to 1 pipes, thank you greetings from LA California
@antoniokhoonsirvong1727 Жыл бұрын
Does warranty even matter that much? Lol. Serious question though.
@sergiomacho1 Жыл бұрын
wow i want one . ! but you ride like my grate grandma ..
@MrDukeofearls Жыл бұрын
Should have unplugged the o2 sensors twisting them while still in the pipe is how the wiring gets messed up, that way you can thread them into the new system off the bike and tighten/plug them in once the pipe is mounted. Makes life more simple.
@FranktheDachshund2 жыл бұрын
Sounds great!
@gareerabaza69042 жыл бұрын
Thanks mate 👍🏼
@lowriderstliving2 жыл бұрын
Just picked up a set of Leather Pro V3's - Fit/Fumction/Looks all improved for my Lowrider ST.
@billyhaig25262 жыл бұрын
Hey! I have the same set up and having a hard time! Dynojet isn’t getting back to me. Can you email me the tune file they sent you so I can use it for my bike?
@seang31012 жыл бұрын
Harley is finally in the news getting sued for voiding warranties for "aftermarket parts". Amen.
@93ORyan Жыл бұрын
Pipes are one thing, but by law Harley has to follow EPA guidelines, The moment you change the tune to a 3rd party is going to get your bike flagged and yuor warranty is toast.
@ghilleinthemistsz2 жыл бұрын
i just switched the clutch side grip on my lowrider ST and now it won’t start and the led display won’t come on but i can hear fuel going to the pump and the head/taillights will come on any idea on a fix ???
@puntakankleenklay3982 жыл бұрын
Waiting for your new vid bro
@anniehurleyhone17852 жыл бұрын
What did you wind up doing for the bag support?
@kurbaniak2 жыл бұрын
Like on Christmas Day as a little kid when my parents got me a new bicycle. See you later reflectors and chain guard.
Had a question about the bag bracket, did you have to make a bracket or purchase it? I can't find anything out there.
@FreedomRider19822 жыл бұрын
💯👍
@FreedomRider19822 жыл бұрын
You have my vote 💯👍
@coloradogrownHD2 жыл бұрын
How do you like the grips so far. Iv put them on my road glide 3 days ago and they kinda hard, harder then I thought.
@CMFS1012 жыл бұрын
How fast were you going into a right turn when you scratched the front right peg mount?
@kennethharman24402 жыл бұрын
I am sick of these three letter bureaucracies the American people did not vote for this crap
@kennethharman24402 жыл бұрын
Lord in the name of Jesus take out the EPA and whoever it is in Europe
@orlandofranco99102 жыл бұрын
What’s the color stitching in ur ride seat
@parolajd2 жыл бұрын
Is there a black version of the new exhaust
@renone62672 жыл бұрын
Notice any difference between stock and Flo levers or mostly just for aesthetics? Had 1F levers on my dyna and those were really smooth. Thanks!
@BaggerBro2 жыл бұрын
hey what did you have to do as far as the bag mount ? i about to pull the trigger on this exhaust and want all my ducks in a row .. thanks bud
@mattmarcoux9642 жыл бұрын
Hello Riley so I have a question. What did you do on the primary side? For the foot pegs? Did you just pit the other side in the frame spot so the passengers feet are 2 and a half inches higher on that side? Or did you fing a smaller thread bolt to bolt the bracket into the saddlebag support? Thanks
@mojo43762 жыл бұрын
Those would be awesome levers if they didn’t have a big white FLO on them…
@JCunningham212 жыл бұрын
heavy plastic fishing line and heat works great.
@JCunningham212 жыл бұрын
black anodized and the texture is how it was machined.
@scruffycavetroll75472 жыл бұрын
I have one of these bikes and just got the rizumo hd grips from the website. Video was just what I was looking for to see what to do
@mrvicco2 жыл бұрын
could yo post the pv tune? I cant find any tune for it !