Please somebody anybody give me this part number

No sound/audio??

huge help thanks so much

Great detailed repair work, thanks for sharing.👍

Your coning is also called chamfering. Four 90's does restrict the flow, I use four 45's when posable.

Very informative. Wish me luck

I need to do this but I need to angle the 90' downward. Then need to fit a T to put a sprinkler in. As it sits now the sprinkler I have sits 1 inch too high. Angling them down will give plenty of room and I will just need to add a riser. Thanks for this vid!

Great info, but Video out of focus

Video but do you have to turn the water off somewhere in the house? I tried to pull mine out and water started to gush pretty heavily unlike when you pulled yours out I don’t see any valves or anything at the tub to turn the water off.

Great video after 13yr

thank you.

I know this is many years ago but I have an other than Moen Home Depot shower handle that broke and it's been difficult to repair.

Absolutely fantastic and clear KZbin that really was appreciated. Thank you for a thoroughly clear and complete training video that was exactly what I needed. The Slick and Slide Silicone Past is no longer available. Lowes and Home Depot sell something I bought (on the shelf at Lowes) that worked fantastic called "Danco Silicone Grease 88693" for $4.48. Thank you so much again for providing exactly and completely what I needed!

This video is old, but it is a great video. I just followed it. Mine was really stuck on there. I soaked it with PB Blaster every day for about three days. On the final day, I heated the area with a heat gun-I did not use a torch. I heated it up for about five minutes, going around the nut. I was able to unscrew it with my hand, slow and easy!!!!

13 year old video helping me out today. Been having a leaking shower head since I moved in and decided to pull it apart. I have a plastic shower ball too so it also leaks from the handle. All the newer videos show plastic shower valves you replace but this is the style my home has. Copper with a plastic ball. Also I didnt see any springs when I pulled mine out, go figure. I'll check again but I wouldn't be surprised. Half the plumbing in this house was done by a hack job. Thank you 13 years later!

Used this video to replace the cartridge but now the water pressure from the shower sucks. The shower in my guest bathroom is fine so I’m not sure what I did wrong. Any advice would be greatly appreciated!

Just wanted to replace the plate cover of the handle, and the handle, and then when the opening water flow- leak thru the handle... So, will have to change the cartridge now I guess lol

Thank you much for your video, very very helpful

Great explanation……. Saved myself money by not calling the plumber and doing it myself. 😊

Yes I will try again because I failed once and I ordered another one. Yes I can do it

Something I learned, our homes pioes weree literally installed crooked! I knew the gandle was always slightly off, but when i looked in the "ten and two" were not centered. At some point we will need to call the plumber to have it reworked, but in the mean time i learned you MUST have the balls holes matched up with the valve holes, or else the hot and cold won't mix right! Just pay attention fo that tab slot it helps position it big time!

Thanks, man! 💪🏼

Thanks for the content, you saved me a bunch of money by not needing a plumber.

Thank you sir!! Much appreciated

Very helpful and clear, thank you! My bonnet collar was stuck and I didn't want to pry too hard and couldn't find one in polished brass to replace it if I had to cut it to get it off. I put aluminum foil in the hole under the valve and had it drape over the tile so liquid would not go behind the tile. I alternated liberally applying CLR and WD40 for about 4 hours... the bonnet collar finally broke free. I know plumbers can't wait that long, but DIYers may want to give that a try.

Thanks for your help 😃

I'm stick it Delta, never go with this one it seen like they designed for home owners nightmare 😢

Thank you so much!

I had the problem at the end and I turned it 180 but that didn't work. If I put the handle on upside down then it works.

Thanks for the video. Where do I get the little tool to remove the seat and spring? The rubber seats of my faucet are completely hardened and stuck.

Wow! The shower tub valves seem way less "scary" to address now. We(my spouse and I) have a home with plumbing components that are now between 22 and 27 years old... each of the faucets have begun to leak (drip) through the 4 years we've been here. Addressing the sinks had felt very straightforward (easy). Thank you for making and sharing this video!

I have the same valve but I cannot find the part to replace, do you know the part number and where I can look for?

I used your video and repaired the 3/4 " supply line to my house. The slip fix worked great when a compression fitting wouldn't hold....thanks

The brass rod on our tub valve snapped in the full on position. This video helped me identify the problem and replace it in about an hour. Thank you!

Great channel 🙂

You just (well, 14 years ago) saved my sanity. Thank you!

What is the Part number i can order , i think i have the same problem,the exact part,very old ball Cartridge, can you please someone help by providing part assembly Number, from where can I buy.

Great video, ordered my parts after watching and will be taking care of this most annoying issue later this week. Thanks for the great video.

Oberbrunner Brooks

No one cares about the thread. What we care about is how to keep the filter from falling out.

Clockwise?! I feel like an idiot now 😅thank you!

I’m not getting it.. is the bulb Auger to big to go into the bowl???

I've fixed mine today, the toughest part was to turn off the dome cap. Sprayed PB plaster on, and left it overnight, the next morning it came off as soon as I twisted it. Only changed the springs and washers. It cost me a total of $4.50. Thank you so much for your video.

This video just saved me $400 in plumber's fees. Protect this man at all costs.

Great DIY video! Total cost for moen cartridge, extra moen pin, plumber's grease and a knock off puller at Home Depot $66.45! The guy at Home Depot looked at me like I was crazy when he realized that I was fixing it myself. (Yes, I know I'm a women and I am going to fix it, lol) End result, It works great, I saved a lot of money and all due to your terrific DIY video! Thank you!

Good video. Good explanations. Speaks to my project totally

I realize these videos have been around for a minute but I just keep coming back. You just saved us a plumber/handy man call AGAIN and I fixed ANOTHER potty problem (technically 3: the Flowmaster valve repair and the leak tracking videos)! If I ever get to Ramona, I'm buying you a drink or a doughnut or giving you a hug.

Just followed your instructions and it worked perfectly to stop my leaking shower. I had to use PB Blaster on the dome cap. Sprayed it and just let it sit for about an hour. Went back and it popped loose. The rest was easy. Fixed it for a grand total of about $10.00. Thank you.

I had to use the pliers, because adjustable wrench kept slipping. Put a newer version on with a swivel head. Thanks for the video, good explanation.

Thanks! 13 years later, you not only saved us money, you also saved us from having to wait for the plumber. Our Ace Hardware had everything we needed. I hope you still read these comments to see how much good you did over the years by posting this!