Disco Worx

Пікірлер

@ToktokPhone-u1l 5 күн бұрын

Ok thanks kyou Boss😊😊

@paulricelli5520 14 күн бұрын

Starts at 3:12

@AJ-qn6gd 16 күн бұрын

Easier to just buy an Eberspacher pump, they’re silent.

@jon_underscore 22 сағат бұрын

And cost £150

@AJ-qn6gd 22 сағат бұрын

@ I’ve never priced one but quality does come at a price !

@jon_underscore 20 сағат бұрын

@AJ-qn6gd well that price, is twice what my whole diesel heater kit cost. So it's a no from me

@DiscoGruffaloRTFM 26 күн бұрын

8:00 It's not an idler, it's a tensioner, and it doesn't have a pin. Only use a made in Canada part for the tensioner, they have several brands, but all the Canadian ones come from the same factory as the OEM FoMoCo.

@Discoworx 26 күн бұрын

@@DiscoGruffaloRTFM i may have conflated it with the tensioner on the timing belt. Good pick up. I'll look for a Canadian one next time. Don't think that other one has more than 30 or 40k km on it.

@DiscoGruffaloRTFM 27 күн бұрын

Get the Chinese alloy version of the coolant outlet. 6 months and 5000km on mine, no problems. Cheaper than a plastic version, and miles cheaper than the Ozzie billet version.

@Discoworx 26 күн бұрын

@@DiscoGruffaloRTFM didn't even know one existed. Thanks

@Discoworx 26 күн бұрын

@@DiscoGruffaloRTFM ive found an alloy coolant outlet but struggling with a Canadian tensioner. Have you got a link for me? Thanks

@Shanes_Shed 28 күн бұрын

As always, glad my videos are still helping

@EmersonDanielRamirezSanchez Ай бұрын

Hello, my land rover discovery has the same problem that you describe in this video, the solution you propose is very ingenious and I would also like to implement it in my car. Could you give me the information about the oil capture system? Where can I buy it and the specifications. Thank you very much for your help!

@Discoworx Ай бұрын

@@EmersonDanielRamirezSanchez just look up 'oil catch can' on eBay. If you put a small (tiny!) leak in the vacuum system you don't need a catch can though. I've never had a drop of oil in the can. I'd concentrate on that and the additional non-return valve(s). Just take the hose off the end of the booster and take it to a pneumatics supplier and show them what you want to do. You also want a filter on where you introduce the leak. None of it will be expensive.

@EmersonDanielRamirezSanchez Ай бұрын

@@Discoworx Thank you so much for you hepl!!

@Shanes_Shed 2 ай бұрын

Good video. 8m fairly sure that the exhaust is just dumping the pressure between the compressor and the first valve block so there would not be a huge amount of air it's exhausting each time.

@Discoworx 2 ай бұрын

I'm pretty sure the compressor always comes on for a short period whenever the car is started, not just overnight. I had thought this could be from air exhausting when the compressor turns off, dropping some pressure but if that was the case the compressor would always be 'hunting' (starting and stopping) so i don't think that's the cause.

@mattyP_7428 3 ай бұрын

Hi got the same issue - do you know if the injectors can be rebuilt ? I was going to try disassembing and then ultrasonic cleaning them but dont know if they are serviceable or not.

@Discoworx 3 ай бұрын

@@mattyP_7428 wouldn't bother. Find the dodgy one and just replace with a low k unit.

@GunnerMacIntyre 5 ай бұрын

Thanks man.. My machine just needed a good clean of the inflow to the Flowmeter.. now it's working again. I was about to buy a new 800 USD machine.. Saved those money thanks to you and one other YT channel :)

@jmurph2910 6 ай бұрын

Do you know what the soft larger diameter hoses are in the machine? I can't find replacements and no description of them either. Specifically the ones that supply from the reservoir to the pump

@Discoworx 6 ай бұрын

Sorry, no. Try ringing the De'Longhi help desk. Or try a specialist hose supplier.

@TRAVERSE_ADV 6 ай бұрын

Try buying a leak off pipe for a Territory 😅 its triple the price of a Disco.

@alinvlaic191 8 ай бұрын

Hi mate, if mine broke at the low rpm , idling , do you reckon it still has damage the top of the engine? Is it worth repairing? And difficult? Thank you!!

@Discoworx 8 ай бұрын

I'm pretty sure they are an interference engine (which many are) so probs have bent valve stems. I've never had a head right off to do this so can't say. Depends on handy you are i guess.

@christopherlewry7906 9 ай бұрын

Did you code injector

@Discoworx 9 ай бұрын

No need with this model

@BobSmith-ui4qu 10 ай бұрын

Do you remember what the name of the store that you got these parts from?

@Discoworx 10 ай бұрын

Fleabay i think

@stevenpain2702 11 ай бұрын

Hi you said you wouldn’t use catch can again , could you tell me another way you would do it with listing of parts thanks steve

@Discoworx 11 ай бұрын

Just use the two new non return valves with barbs on them. I can't remember the size. I think it was 8mm / 5/16. You would also install a T with a needle valve on it to bleed to atmosphere (extremely slowly). Put an exhaust filter on it, too. So this would possibly be a threaded 1/8 T and fit 8mm barbs x 1/8 male and a 1/8 male needle valve with a 1/8 exhaust filter. Go to a pneumatics shop and they will understand and help you. Take the hose from the booster to make sure you get the right size.

@ArminLizam Жыл бұрын

may i know what type or code for the oil seal inside the hydraulic. Mine has been broken and i dont seal any code for the oil seal.

@Discoworx Жыл бұрын

I don't know of any code for the rod seal or piston seal. Just search the dimensions of the rod seal and hopefully you can find something.

@anthonyberry8604 Жыл бұрын

thank you so much for this video

@Discoworx Жыл бұрын

Admittedly it's pretty crap but I'm pretty sure nobody has provided that level of detail before to repair these things.

@dalejohnstone928 Жыл бұрын

My discovery has the same problem where do I get the kit from menny thanks

@Discoworx Жыл бұрын

It's not a kit. You have to buy the bits separately

@BobSmith-ui4qu 10 ай бұрын

Not a kit but where do you buy these pieces. What store or shop.

@Shanes_Shed Жыл бұрын

It's a bastard of a job. I personally just struggled with access initially so just pulled the top arm, I'm also a lefty so my dominant hand is trying to work at stupid angles that a right hander probably wouldn't have to deal with😂

@Shanes_Shed Жыл бұрын

Good to see your setup there. People don't know how to use their leg muscles hey

@Discoworx Жыл бұрын

I can report that it runs like a charm. It can run a bit rough cold but did that before the belt change, too. Any ideas?

@Discoworx Жыл бұрын

When you pull the hose clamp back pull it further than you need which will let you push it back on far enough. Unless you can hold the clamp open and push on the hose at the same time.

@BB-ne9ev 2 жыл бұрын

Sorry to react on this Video, but in your Diesel Heater video I saw that your Exhaust is mounted dangerously wrong. It's mounted upside down and has a sink in the pipe. It can fil itself up with moisture this way..

@Discoworx 2 жыл бұрын

Upside down? I was pretty sure I had the drain hole of the muffler pointing down but I'll double check, thanks. As for the bend, maybe. The velocity of the exhaust gas here is constant unlike the muffler where it really slows down and has a chance to cool down which is when the moisture would drop out of it. I'll keep an eye on it though. Thanks.

@RealityIsTheNow 2 жыл бұрын

Comments are off on the diesel heater video, for obvious reasons. Just reiterating that the pump needs to be at an angle, or you risk early failure. Yours is sitting flat.

@Discoworx 2 жыл бұрын

Er, not sure what the obvious reason is. I'll look at getting the comments on. As for the pump, once it's primed I don't see any rationale for premature failure? Why do you think?

@richardm8319 2 жыл бұрын

Great video thanks. My 3500 has made 25500 coffees + 6000 cappuccinos over 12 years. No maintenance other than cleaning and the front solenoid has now packed up. I broke the plastic hose connection trying to fix it but it still makes coffee but no steam. All the plastic is very brittle so im not sure it is worth fixing as it doesn't owe us anything. Would buy again when I have the cash.

@Discoworx 2 жыл бұрын

Thanks for the kind words. Great to hear that your machine has lasted the distance!

@wexman1000 2 жыл бұрын

Hi Robert hope you or anyone else can help i have a ESAM4500 grinder not grinding long enough any more only 1 or 2 seconds , working ok on preground coffee , saw another tiny bit of a video where the man reckoned it could be the hall sensor failure on the bottom of the transmission and that puts the machine into a safe mode only grinding for a second . have you ever come across this problem ? and if you think it is this sensor is it possible for me just to change it out ? love your video by the way

@Discoworx 2 жыл бұрын

Hi Wexman, sorry but I can't help. Good luck.

@wexman1000 2 жыл бұрын

@@Discoworx cheers for the reply

@glennstock4931 3 жыл бұрын

Hey Robert, thanks very much for filming your efforts to replace the injector, I have the same problem with a rough start, but no smoke blowing out the back, just dropped it off at the mechanics and am waiting for thier prognosis. Can't thank you enough for the information about the injectors not being sealed at the top, I had no idea and realise now why people are having so much trouble with the older models. I will keep in touch to let you and your readers know how I get on. Once again, thanks for your video. G.

@Discoworx 3 жыл бұрын

Thanks Glen. What do you mean by rough start? Idles rough for a while and then calms down?

@chrismac9640 3 жыл бұрын

I am a bit concerned in that it looks like the motor supports are just sitting on home made dampening and cowling with just the cut out concaved cuts keeping it in position without any fastening points. Did you try to dampen the supports to the manufacturers fastening points and if so did it help at all? Cheers

@Discoworx 3 жыл бұрын

Hi Chris, you could try that but this system of dampening has been working like this for years now. If you fasten the motor mount that gives a means of transferring vibration. Also, you would be limiting/making it more difficult to dampen as opposed to working in free space. You can see that the dampers are fixed via tek screws. Unless there's a MASSIVE earthquake the motor isn't going to move. The cutouts are substantial enough to ensure that. Cheers.

@marcschouller9543 3 жыл бұрын

Hello, I have the same problem with my Disco 3 tdv6 2.7 08/2006. how did you find the correct part to buy? Do you have the reference?

@Discoworx 3 жыл бұрын

I just rang the wrecking yards. They will know the motor and the part.

@marcschouller9543 3 жыл бұрын

@@Discoworx thank you for your help 👍

@vickyyeung8814 3 жыл бұрын

Hi Robert. Excellent. Last night my Hubby tried to fixed our coffee machine. Delonghi ManificaEAM 3400.S, and accidental damage one of the wire next to the water boiler and circuit was short. Now he tried to turn on the machine nothing work. a red light on top of Menu light on for 2 seconds then off. The screen has light but blank. Thank you Robert

@Discoworx 3 жыл бұрын

Maybe a fuse on the board?

@vickyyeung8814 3 жыл бұрын

@@Discoworx Thanks for your replied. Can i please have the image of the fuse locate on the power board. Cheers

@Discoworx 3 жыл бұрын

@@vickyyeung8814 I don't know that for a fact. Just an idea. I don't have an image. You'll have to look for yourself.

@NervousWrex 3 жыл бұрын

Thanks so much for this thorough review. I also received my Magnifica from a friend and performed a complete cleaning and lubrication of the infuser assembly and transmission, full wipe down, and vacuuming but the machine would still report a Generic Alarm even without running the self-diagnosis and I successfully ran all functions in Load Test Mode, Display Test Mode, and Counting Mode. Finally, I was able to get a delicious double serving of coffee after leaving the coffee maker unplugged overnight. Then after about 20 minutes, the display once again read Generic Alarm and I'm back to where I started with a non-functioning machine. Any other suggestions to troubleshoot?

@Discoworx 3 жыл бұрын

Sorry. Been quite a while and just don't remember.

@NervousWrex 3 жыл бұрын

@@Discoworx Thanks for your reply.

@davidk4236 3 жыл бұрын

Question for the experts...I have the Magnifica. It will pull single shot but not double. Pump sounds normal at start and quickly gets quiet with nothing coming out. I replaced pump with oem after 3 complete descaling procedures made no difference. Hot water and steam works good. Water comes out of espresso nozzles at startup and shutdown. I fully cleaned and lubricated the plunger assembly (even that plug and tiny hole below screen). No signs in tubing of scale buildup. I am at a loss. Any suggestions? Thanks!

@Discoworx 3 жыл бұрын

Interesting. I haven't had the machine for a few years so it's hard to comment. I suspect that you were on the right track with the descaling for a blockage but you might have to get more mechanical. Maybe a crimped/blocked hose?

@davidk4236 3 жыл бұрын

@@Discoworx Thank you for the reply. I am going to inspect all the hoses and clean then....like you said, maybe a blockage of some kind....

@Discoworx 3 жыл бұрын

@@davidk4236 surely the only difference between a single and double is the volume of water? Which is dictated by programming the button and the flow meter? Maybe try programming the single button to do a double for a giggle and it may indicate further where the problem is.

@sgvwmanx72 3 жыл бұрын

Hi Rob. Have you had any water leaks when you push the hot water button and water sprays out the hose which is connected to the solenoid at the back. It the one that has the lines going from the thermoheater. Tried to re-melt the end to seal but no luck. Any suggestions

@Discoworx 3 жыл бұрын

Sorry, never come across it. Lost o ring?

@leonhunter1181 4 жыл бұрын

Hi hope you can help me its not reading the milk container and water spout ??

@Discoworx 4 жыл бұрын

I haven't had this machine for a few years. There will be a switch that gets activated probably at the top near where the steam comes in. If you can find it try joining the wires together. Good luck!

@caseygutierrez5349 4 жыл бұрын

Good day. I have a DeLonghi ECAM23460S. The display shows "water circuit empty please fill water circuit." Any advice would be much appreciated. Took the back cover put and the tube that connects to the tank is dry. No water is even reaching the flow meter. The machine is new, but I don't have warranty or a way to return it. Thanks in advance!

@gerard1317 4 жыл бұрын

I have a Problem with the cup warmer become way too hot Any ideas?

@mercedescruz8654 4 жыл бұрын

Horrible explanation of repair

@ponsaravanan 4 жыл бұрын

Very nice and detailed explanations. I spent a day today to fix the water spout issue. Still working on it

@33Sanchez 4 жыл бұрын

Hi mate, your recommendation to replace the teflon ball with a bearing worked a treat! Many thanks

@nadineh4732 4 жыл бұрын

Hi, I can read on my esam 3500 general disorder. I started the machine, and it takes a lot of time to heat up. After a while General disorder came up, and nothing goes on. 😏 The machine is maybe 10 years old. Of course no guaranty 🙈 Can you help me please? Do you have any idea? Thanks ands greetings

@Discoworx 4 жыл бұрын

My machine died some time back and I now have a small unit that just takes preground coffee and it makes great coffee. I recommend you throw the old unit away! I will make a video on making great coffee with these small units.

@nadineh4732 4 жыл бұрын

Oh Ok... Thanks! It's not worth it... Unfortunately. Replacement is coming 😅 Thank you for your answer.

@joshnolte 4 жыл бұрын

Hi mate, I have the same machine and have now started experiencing where the water keeps coming into the drip tray when making coffees. It still comes out of the spout but a portion of clean water keeps coming from the main group in the middle somewhere. It leaks inside the the actual machine (black plastic). Have you had any issues with water leaking in the drip tray whilst making coffee? Thanks in advance if you respond.

@Discoworx 4 жыл бұрын

Sorry. Never experienced that one! You'd have to take the covers off and check out all the hoses and joins. Good luck.

@KeepsItReal5555 4 жыл бұрын

Hi Robert i have the 3300 model and the water indicator keeps blinking red! Starts up fine but wont pull water for coffee or steam.

@Discoworx 4 жыл бұрын

I would try and bridge the magnetic water level sensor out. After that it could be a faulty board. Have a crumpet and a cheat day whilst you're at it 🤣

@fishkata01 4 жыл бұрын

Thanks Robert for the video. My machine throws most of the coffee not in the coffee tray. So as a result when I open the machine it is all over used coffee inside. Any idea how can I fix it?

@Discoworx 4 жыл бұрын

Sorry but I haven't encountered that one.

@rohansprenger6902 4 жыл бұрын

Neighbours just got one a while ago - noise is unpleasant even from next door.... I don't know how they live in their house with it running... Happy to state that anything anyone has heard about split systems (I have one) being expensive to run is nonsense,....And it dehumidifies as it cools.... If you are considering buying an air con and are tossing up between a split system and an evap cooler, while they do indeed work, dollar spent on an evaporative cooler is a dollar wasted when there is a much better alternative.

@robwiltshire1270 4 жыл бұрын

I have a Generic Alarm issue. Goes through its diagnostics OK then displays the Generic Alarm. Something I have noticed is when this is displayed only half the warming tray on top is hot. Any ideas would be welcome.

@Discoworx 4 жыл бұрын

Hi Rob. I think they have 2 heating tanks (water, steam). Rip the covers off and check the thermistors with a multi meter. Good luck.