Klecker Tactical

Пікірлер

@MedicUp2024 9 күн бұрын

Great video. I am a smaller channel myself and only watch other smaller channels because they have better content. This stuff is right up my alley subbed

@KleckerTactical 9 күн бұрын

@@MedicUp2024 Thank you

@DaLightBlue 17 күн бұрын

Thank you dude, its the only video that helped me with my 45 acp. ❤

@jimmorrison306 18 күн бұрын

Probably would look neater to lay sandpaper on a flat surface and act like you’re sharpening a knife. Use finer grit to wear the end to finish it somewhat.

@KleckerTactical Ай бұрын

Edit*** the trigger guard holster is currently not available but you can send us a message on IG, FB or directly from the website if you need one we will set up a custom order

@TheGunGuyCody 2 ай бұрын

Love it looks good.

@gusdabus05 3 ай бұрын

Just got my holster from y’all. I can personally contest the customization fits perfect for my Taurus G3C with Lakeline Ported Barrel and Viridian C5L Micro with Instant On feature.

@KleckerTactical 3 ай бұрын

@gusdabus05 thank you.

@cody162 4 ай бұрын

I did not see the trigger guard holster on your website. Are they still available?

@KleckerTactical 4 ай бұрын

@cody162 we temporary removed it for a redesign. It should be back up soon

@davidsherwin5323 4 ай бұрын

That holster is a piece of shit

@BVTV360CLAN 5 ай бұрын

What holster is the first one.

@KleckerTactical 5 ай бұрын

@BVTV360CLAN That is our IWB-FP (Fanny Pack)

@BVTV360CLAN 5 ай бұрын

@@KleckerTactical who is our?

@BVTV360CLAN 5 ай бұрын

Oh klecker I’m blind

@BVTV360CLAN 5 ай бұрын

@@KleckerTacticalis the sweat guard removable?

@sharkbite326gaming 5 ай бұрын

Dad jokes are how eye roll bro

@sharkbite326gaming 5 ай бұрын

Im digging it

@sharkbite326gaming 5 ай бұрын

Im really loving that one man keep it up dude

@KleckerTactical 5 ай бұрын

Thanks brother

@b718904 5 ай бұрын

Share a promo code…. I was referred to your company by viridian as you and only 2 other companies make a holster for my tac light.. C5L Custom Glock is the light but I’m in the process of putting a order in as out of the 3 companies yours looks like the best quality

@sharkbite326gaming 5 ай бұрын

I can personally vouch for this company ive purchased handfuls of product from him and ive yet to be disappointed. Great quality and fair and competitive pricing.

@b718904 5 ай бұрын

@@sharkbite326gaming yea Im in belief of your statement! I placed my order over the weekend cant wait till arrives… after placing my order I should’ve left it open ended so I can add a comp but also weary of it adding too much length for appendix carry🤷🏽‍♂️

@sharkbite326gaming 5 ай бұрын

@@b718904 i think youll be happy with it regardless honestly

@b718904 5 ай бұрын

Hey is there is any way to make sure I chose the right drop-down option for my tack light I already placed my order and sent a supplemental email to confirm. I chose the right option for my light would hate for the holster to be made and I chose the wrong drop down option. I also included in my order the SKU number for my tack light. Not trying to be a pain in the butt just trying to make sure everything goes smoothly. Thank you so much and can’t wait to receive the holster

@ОлегБаранов-е8ф 6 ай бұрын

Название очков ?

@AndrewSeal-wq6xy 6 ай бұрын

Good info.

@brian770 7 ай бұрын

have done this step by step pausing as i go, and i can NOT get the bushing to go in or turn like yours does....have to stop and look for silver cap again,my ruger sr1911 was never this hard, thhe bushing wont even go into gun unless the cap is depressed, and then its almost impossible to turn

@KleckerTactical 7 ай бұрын

I would make sure that the bushing is turned the correct way before trying to turn it. It will only go 1 way to come out and sometimes only allow the spring cap to go past went turned 1 way. Not always the case but have seen it before. Also try the bushing in the slide wit the slide separate from the frame to ensure it's turning properly.

@brian770 7 ай бұрын

@@KleckerTactical I got it !!! i dont know if they went to a heavyer spring or what, but mine is a new gun and while i love it, i will never understand why they used a open ended cap for the spring...makes it much harder to try and push on.

@2112sonoflife 7 ай бұрын

Thank you for this video, I haven't shot my 1911 in over 5 years, I totally forgot how to disassemble it, thank you for the clear explanation

@AriePharmD Жыл бұрын

Excellent take down and reconstruction. One comment: @08:00 I was always taught the open end of the guide rod spring went towards the front with the closed end towards the guide rod. Just an observation.

@KleckerTactical Жыл бұрын

Thank you I have learned much since making that video and worked on hundreds or 1911's and other firearms. Always improving

@AriePharmD Жыл бұрын

@@KleckerTactical Again, great video presentation. You have my respect. I’m constantly learning also.

@daflame40 Жыл бұрын

I went with the Strike industries mag ext..... having the exact same issue. Thanks!

@Rustebadge Жыл бұрын

The aftermarket accessory manufacturers should pay more attention. Not the gun manufacturers fault.

@markhouck5258 Жыл бұрын

TRULY LOVE THIS PISTOL (FNX 9mm) I've a few Pistols and Always FN USA is my 1st Grab...

@informaticamcy4250 Жыл бұрын

⚠Does this +6 extension work in the new "m&p9 metal 2.0"? Let me know please!🔴

@NBWDOUGHBOY 2 жыл бұрын

I hope it does loosen up a bit and allows for that extra round. Like you said, Its not a big deal but, I want what I paid for.

@NBWDOUGHBOY 2 жыл бұрын

Okay cool. I honestly thought something was wrong with mine. It does not add +6 reliably. I really have to jam that Last round in there to get it to work. And you have to really stuff the magazine in the gun to work and It is almost impossible to rack the slide back with the 23 in the magazine. So really it only works with +5 out of the box. Im gonna message them and let them know about the issue and let them know I'm not the only one that's having that issue.

@Donttreadonme2024 2 жыл бұрын

Used sandpaper and sanded till mag dropped.

@BLACKWOLF-1911 2 жыл бұрын

Does anyone know where I can find parts? Specifically a recoil spring for the 3" undercover model.

@KleckerTactical 2 жыл бұрын

www.gunpartscorp.com/?

@trereed7302 2 жыл бұрын

From a distance, not bad for 1st attempt

@diegscortz 2 жыл бұрын

I had the same exact problem with the mag extensions. Thanks for the vid 👍

@leonamuwu904 3 жыл бұрын

5:56... Nice

@fckjoebdn1776 3 жыл бұрын

Just use their magwell, I have them on my 1.0 & 2.0 and these extensions, no issues.

@MLFreese 3 жыл бұрын

This gun looks like it was meant to be a steel frame, but was born too late for that.

@hansstrouf 3 жыл бұрын

FN Herstal made in

@jasonrogers6346 3 жыл бұрын

Columbia, SC

@richwood8650 3 жыл бұрын

Biggest difference..... Hard to find soft point in 7.62 x 51. Also hard to find armor piercing in .308. Your welcome.

@Oculus729 3 жыл бұрын

"You're." Details matter.....especially if you want to be believed.

@GunsDontKillSSRIDoes 2 жыл бұрын

@@Oculus729 I believe you.

@kevinshank4222 3 жыл бұрын

I have had 3 308 rifles and shot both 308 and 7.62x51 ammo Thru the guns and I have 2 ar rifles and shot 223 and 5.56x45 for years and I reloaded them and haven't found any problems with them you people need to study History of the ammunition because the military Came up with the 308 and the Armor light rifle company Develop the 223 because the ar started out with the 308 before the military wanted A lighter round so infantry men could carry more ammunition into field

@SuAmigoElilegal 3 жыл бұрын

Question pls. If you have a .308 bolt action rifle and ar10 .308 semi auto , do you recommend using. 308 on the bolt action and 752x51 nato on the Ar10 . I m asking because the ar10 is more of a compact weapon vs a hunting rifle

@kevinshank4222 3 жыл бұрын

@@SuAmigoElilegal yes because the military Developed the 7.62 by 51 and Remington took the cartridge and introduced it as the 308 but it didn't sale for Remington and then Winchester took it and offered it as the 308 Winchester so that's why they are the same Cartridge because I have a m14 and it Shoot both cartridges because they are the same

@stanwray5663 3 жыл бұрын

OUTSTANDING presentation ! No mumbo-jumbo , no distracting extra commentary etc; perfect ...

@stuartmarkman769 3 жыл бұрын

Why cant my 308 die resize a 7.62 x 51 case? I can't get the 7.62 to go all the way in the resizing die and I don't ever force a round in any die.

@KleckerTactical 3 жыл бұрын

I do not know enough about reloading accurately answer your question

@franksullivan1964 3 жыл бұрын

Nice gun!!

@brandensoutdoorb-channel8084 3 жыл бұрын

I have a 2.0 and it works just fine with the basepads

@greggminkoff6733 3 жыл бұрын

You're evidently self-taught. You do everything the hard way. Your posture for shooting and firing a weapon is terrible. Stop making videos get some professional training and then make new videos. I'm actually embarrassed for your ignorance.

@larryb.1884 3 жыл бұрын

like he said!

@Steven_M. 3 жыл бұрын

I purchased 3 of the +6 base pads w/ new springs. They’re supposed to give you 23+1 but can only get 19 in. Did you have this issue and are you currently using them now?

@KleckerTactical 3 жыл бұрын

I get 23 In mine very tight but I can get them. I do still use them but I am switching to the strike industries ones, I like them better

@Steven_M. 3 жыл бұрын

I know many people use extension base pads and they’re not originally designed for defensive use, but how much do you trust both?

@KleckerTactical 3 жыл бұрын

@@Steven_M. the Taran Tactical one are aluminum so they are tougher and the strike industries ones are polymer but so far they have held up. I have not had and reliability issue with using them so far.

@Steven_M. 3 жыл бұрын

@@KleckerTactical Thank you for the responses. I’m hoping I don’t have to bounce around to Floyd’s, TaylorFreelance, Strike etc.

@KleckerTactical 3 жыл бұрын

@@Steven_M. check to make sure the spring is fully seated and not snagging causing you not to get the full +6 you should at the very least get 22 in there using the TT springs that come with. Also juat to be certain check the packaging to make sure the sent the proper part. Hope that helps. The TT bases are $$$ so it hurts to get them an then not be satisfied

@paulswickard7488 3 жыл бұрын

I like my G3, but if you load 8 rounds in mag you will have to open the slide to fit mag into grip.

@chrisaaron2159 3 жыл бұрын

Get the EMPs from striker industries

@KleckerTactical 3 жыл бұрын

That's what I ended up getting, much happier with them.

@chrisaaron2159 3 жыл бұрын

@@KleckerTactical same here so let me ask you ? did you add the plastic piece that’s under the stock base plate along with the emp extension spring or did you just use the spring and the emp extension

@KleckerTactical 3 жыл бұрын

@@chrisaaron2159 I think I just used the spring and removed the factory spring floor plate

@willwilliam217 3 жыл бұрын

I have the stainless steel version of this with no desert eagle logo on the slide. It is a model MR1911GSS and purchased in 2021. I asked Magnum Research a couple of questions after purchase. They said it is a desert eagle still but they can not put the logo on the slide anymore due to the ATF telling them they could not because it is on the 50 AE, 44 magnum and 357 magnum desert eagle models. Also the 1911’s with part MR1911 uses a different sight cut which is novak, the older models sight cut is kahr spec sight cut. I installed a novak dawson precision adjustable rear sight on it which worked out well except I could not tighten down the two set screws. It is a tight fit and I used loctite #243 so I am confident it will not move. I also purchased a dawson precision novak fiber optic front sight but have not installed it yet (just received a few days ago). Was getting intermittent failure to ejects after 100 flawless rounds. Magnum Research replaced the extractor and tensioned. I just got it back yesterday, turn around time from the time that I sent fedex to the time it was returned was under 7 days which I thought was pretty incredible.

@KleckerTactical 3 жыл бұрын

That is good information to know thank you.

@XxDatBoyFly1xX 3 жыл бұрын

Just bought this for my full size m&p2.0 . The base pad touches the back strap pin but it doesn’t interfere with it at all for me. Mag ejects perfectly and everything