Royal Guard Helmet Build!!
8:07
Mandalorian Visor Tinting!
10:22
Disney Camtono door fix
6:31
2 ай бұрын
Jetpack Beacon Installation
9:57
2 ай бұрын
R2-D2 Lazy Susan Install (Part 11)
12:28
Revan Full size mannequin build
8:39
Conqueror Prequel Challenge medal
4:55
Coz3D Jetpack update
3:59
5 ай бұрын
R2-D2 LEGS! R2 (Build part 5)
16:36
Пікірлер
@_elvis_presley_
@_elvis_presley_ Сағат бұрын
Cool story!!! same thing happened with me and Hayden! He signed my custom RoTS stunt lightsaber I made with the correct red painted blade and he was so stoked when he saw it he was like dude where did you get that?! I told him I made it and he immediately started twirling it and spinning it like he did in RoTS!! Then he told me he hadn’t seen one of these since 2005! I was shocked and thrilled and I’m so happy to hear you had a similar reaction and experience! Hayden is awesome! God bless you and keep up the good work!
@Jaryt
@Jaryt 2 күн бұрын
welder is super cool! just starting to get into actually printing more than just gizmos so this info is greatly appreciated :)
@coz3d
@coz3d 2 күн бұрын
Good! I hope it helps you be inspired to do larger projects.
@KeyserTheRedBeard
@KeyserTheRedBeard 3 күн бұрын
Incredible video, Coz3D. Looking forward to your next upload. I tapped the thumbs up button on your content. Keep up the fantastic work! Your insights on using different mediums for weathering are really helpful. Have you considered any specific techniques for achieving a more weathered look on metallic surfaces?
@coz3d
@coz3d 2 күн бұрын
Much appreciated! So on metals it’s basically the same. Good thing about metals is you can always clean them easier if you over weather them.
@brandonlyerla8268
@brandonlyerla8268 3 күн бұрын
Great video! That R2 looks fantastic. One of the best 3D printed R2 units I've seen. 🙌
@coz3d
@coz3d 3 күн бұрын
Thanks it means a lot you say that, I appreciate it!
@BigGollum1
@BigGollum1 4 күн бұрын
I can see my wife screaming at me
@coz3d
@coz3d 3 күн бұрын
Worth it though, right? 🤣
@Jenniedwards1993
@Jenniedwards1993 10 күн бұрын
That's awesome I was wondering if you got it signed. Hayden was super nice I felt the same way.
@coz3d
@coz3d 10 күн бұрын
Yeah he really was a super nice guy.
@YdnarLah37
@YdnarLah37 10 күн бұрын
Thanks for the update, Hayden is super cool. I don't remember, was that the ROTS helmet? I guess it would have to be wouldn't it?
@coz3d
@coz3d 10 күн бұрын
Actually it’s one printed and built and it’s probably more of an EP4 style but i’m ok with that
@BeyondTheDuneSea
@BeyondTheDuneSea 10 күн бұрын
SO cool! Awesome story. Anakin Skywalker himself giving the stamp of approval 🤯
@coz3d
@coz3d 10 күн бұрын
Yeah it was a moment for sure. One I sure won’t forget
@starwarssith66
@starwarssith66 10 күн бұрын
Awesome story! Isnt so unreal just having a casual convo with the Chose one? 🔥
@coz3d
@coz3d 10 күн бұрын
Nothing like your photo you took with the chosen one though. That was epic! He really does seem to be a genuine good guy though
@DrCoomerHL1
@DrCoomerHL1 13 күн бұрын
What do you do with that bondo that makes it so thin to where you can use a brush?
@coz3d
@coz3d 12 күн бұрын
I add acetone but do be careful to protect your eyes, skin and use in a well ventilated area. I mix it to the consistency of syrup or house paint.
@HenryRoth-el9ln
@HenryRoth-el9ln 13 күн бұрын
Nice, I'm in the middle of this challenge.
@coz3d
@coz3d 12 күн бұрын
Awesome keep it up!!
@johnconnor6735
@johnconnor6735 14 күн бұрын
How do you connect the grappling hook fins to the rocket tip? They look like they should rotate outward if we add a motor, but what do they connect to?
@coz3d
@coz3d 12 күн бұрын
Unfortunately we have not come up with a good reliable way to connect the find other than running a wire through them so they can be manually rotated. If you have any ideas shoot us a message!
@Jenniedwards1993
@Jenniedwards1993 16 күн бұрын
I hope you got it signed
@coz3d
@coz3d 15 күн бұрын
I DID!! I’ll put out a video talking about the experience when i get back. It was all I hoped for
@stinkyfinget
@stinkyfinget 16 күн бұрын
What printer did you use that build volume is massive.
@coz3d
@coz3d 15 күн бұрын
The face mask was on a Prusa XL and a Comgrow T500 for the dome.
@PierreStache
@PierreStache 16 күн бұрын
he is right, as a test and goof i applied glazing putty to a paint test dome ( long story ) and the glazing putty totally ate the paint off in like 0.5 seconds.
@coz3d
@coz3d 15 күн бұрын
Yeah, that stuff is nasty
@eagle9516
@eagle9516 18 күн бұрын
I just purchased the 7.5 foot Darth Vader and love it....They need to come out with a R2D2 like you have in your shop! I might get the Storm Trooper next after all Vader needs his escort!...lol
@coz3d
@coz3d 18 күн бұрын
I hope they do come out with an R2! It would be a great addition to the collection.
@elladar2
@elladar2 19 күн бұрын
@erexit3D
@coz3d
@coz3d 18 күн бұрын
👍
@3vi1J
@3vi1J 21 күн бұрын
Great job & excellent work! Side-thought: It doesn't seem possible that all the marring on the helmet could be battle-damage. If his helmet really took all that as battle damage, including all that stuff so close to the neck... it's only logical that his unarmored body would be at best nothing but an incomplete mass of scar tissue. I guess it *could* be battle damage... if he inherited it from a guy who died in it. Hehe
@coz3d
@coz3d 21 күн бұрын
I'm guessing it's not so much battle damage as it's been home made in a cave with privative tools more than any thing. But you're right, if it is battle damage he'd look like hamburger from the waist down!
@ChineseJailBreak
@ChineseJailBreak 22 күн бұрын
Looks amazing!
@coz3d
@coz3d 21 күн бұрын
Thanks!!!!
@3tailsRV
@3tailsRV 23 күн бұрын
Did you have to Modify the gear ring or resize it before printing?
@coz3d
@coz3d 23 күн бұрын
I did NOT. Either I was lucky or rewarded from years of clean living but it just fit perfect for me.
@timothymccrumb7745
@timothymccrumb7745 23 күн бұрын
Get it one soon by printer
@coz3d
@coz3d 23 күн бұрын
Say what?
@marcayres8567
@marcayres8567 26 күн бұрын
It's massive!
@coz3d
@coz3d 25 күн бұрын
It is quite large!
@kschantz
@kschantz 27 күн бұрын
Where's the part where you print it?
@coz3d
@coz3d 25 күн бұрын
I didn’t make a printing video on this one. Sorry
@kschantz
@kschantz 25 күн бұрын
@coz3d Okay. I guess the title confused me. It's all good.
@Geosanmo
@Geosanmo 27 күн бұрын
This design is mine, look for it as Geosanmo
@crazylegsmurphy
@crazylegsmurphy 29 күн бұрын
Dust Mask, dude!
@coz3d
@coz3d 28 күн бұрын
Most of the time yes..... outside not usually.
@crazylegsmurphy
@crazylegsmurphy 28 күн бұрын
@@coz3d Cool. Didn't see you wearing one in any of the shots. Just a cautionary tale. When I worked in the film industry my boss in the shop was horrible with using PPE and safety. He would lick his fingers all the time to smooth things, never wear a mask or safety goggles. I picked up these bad habits and one day when I was getting plaster for a cast I dropped the scoop by accident into the large plaster bucket. It puffed up a bunch of plaster into my eyes. As you know... plaster and water react. I had to be rushed to flush my eyes before it started to harden. That same Christmas my boss went to the hospital with stomach pains. Five days later he died of stomach cancer likely caused by the chemicals he ingested for years. Always use PPE not only for your safety, but because you're setting an example for younger (and older) people who enjoy your videos. Just my thoughts. Great job on the helmet!
@Chief351L
@Chief351L Ай бұрын
I’ve yet to see anyone use Loctite Hysol glue for joining halves other than me. Not only is it the strongest glue on the planet but it totally minimizes all the grinding & fill work. It’s thixotropic so there’s no sagging and the joint will never come apart equal to it being solid printed or more. I use Hysol 9460/62 series and have used it for the last 20 years on my RC Turbine aircraft that have wing joints that hold up for 250mph+ speeds and the G-loads are in the 10-40 G’s just because of power to weight. Also there’s some newer Spray can High Fill primers that eliminate the need for the Red filler & Acetone. The primer is available at Autozone and is the U-POL White Expert Bonding Primer. This stuff has all but replaced the Red Putty except for areas that need leveling or cracks etc… the big difference is the time & exposure to the harshness of the Red Putty/Acetone mixture.
@coz3d
@coz3d Ай бұрын
I will have to look at the Loctite Hysol glue. Sounds interesting.
@Chief351L
@Chief351L Ай бұрын
@ I’ll come back with a couple links for you.
@davidcooper574
@davidcooper574 Ай бұрын
Very nice work.
@coz3d
@coz3d Ай бұрын
Thank you!
@lookylookhere71
@lookylookhere71 Ай бұрын
Great work but I just wanted to tell you that parts of Vader's face and his neck are gun metal grey
@coz3d
@coz3d Ай бұрын
Yeah, I took the easy/lazy road on this project.
@lookylookhere71
@lookylookhere71 Ай бұрын
@@coz3d I wouldn't call that lazy, that was a lot of work 👍
25 күн бұрын
​@@lookylookhere71agree he did a Great work on the standing. But yah the Split of gun metal paint is the key. Hope you add that Hayden will know lol
@jettech1041
@jettech1041 Ай бұрын
Great work! If you want that bad boy to shine more. Hit it with 1K sandpaper wet and then clear coat it with 2K clear coat.
@coz3d
@coz3d Ай бұрын
I haven't used 2k clear yet. I'll have to give it a try!
@chefhawk
@chefhawk Ай бұрын
“I’ve been waiting for you, Obi-Wan. We meet again at last. The circle is now complete. When I left you, I was but the learner. Now I am the master.”
@coz3d
@coz3d Ай бұрын
"Only a master of evil Darth"
@hdjoe22
@hdjoe22 Ай бұрын
Great job! This is one i NEED but I've been reluctant to print him due to the high gloss needed...
@coz3d
@coz3d Ай бұрын
It's definitely a challenge but you can always wet sand and gloss it again over and over until you get it perfect. Do it! haha
@hdjoe22
@hdjoe22 Ай бұрын
@ any recommendations on where to get the file? You mentioned yours may have issues with those defects it had
@ElectricBrickStudios
@ElectricBrickStudios Ай бұрын
That’s very clean looking! Amazing work!
@coz3d
@coz3d Ай бұрын
Thank you very much!
@JasonChurch1992
@JasonChurch1992 Ай бұрын
Did I miss it? You're using ABS, correct? Nice work!
@coz3d
@coz3d Ай бұрын
Actually using PLA+ with 3 walls and 20% infill so it's nice and sturdy.
@BlazeT3D
@BlazeT3D Ай бұрын
​@@coz3d How tall would you say he sits? I did one and it's oversized I think.
@DH-bw2rx
@DH-bw2rx Ай бұрын
Vader looks good. I recently resin printed a ROTS Vader 1/1 in resin. You’ve got to love sanding to want to do this helmet…. 2K clear and lots of wet sanding and buffing got him glass smooth. Might want to try 2K clear on one of your projects that needs a clear coat. It’s amazing!
@coz3d
@coz3d Ай бұрын
I need to try the 2k clear. I hear great things about it.
@ChineseJailBreak
@ChineseJailBreak Ай бұрын
WoW!!
@coz3d
@coz3d Ай бұрын
Thanks!
@cantinarebels
@cantinarebels Ай бұрын
I need to build myself one of these.. I’m held back by the fear of all that sanding to get it super smooth though lol.
@coz3d
@coz3d Ай бұрын
There’s a lot of sanding but TOTALLY worth it. If you added up all my sanding time it probably doesn’t total more than two hours. Throw on some music, an audiobook or a podcast and it’ll go quick! Hope you start, no better time than the present!
@cascadesouthernmodeltrains7547
@cascadesouthernmodeltrains7547 Ай бұрын
For The plugs for the motors check out Anderson Power Poles. They are easy to build, and can handle 15, 30 or 45 amps.
@coz3d
@coz3d Ай бұрын
That's super helpful! I love their options. Appreciate it!
@stephenmholl1
@stephenmholl1 Ай бұрын
Excellent Job Guys.... Very Clean Install...... Do the Harbor Freight batteries have the BMS built into the batteries? I am still leaning towards the Ryobi 18v 5.0ah but it is not too late to change my mind...
@coz3d
@coz3d Ай бұрын
Thanks! To answer your question on the BMS, no, I don't believe the Bauer brand does but the Hercules from Harbor Freight seems to have BMS. The only reason we did the Bauer brand was because I have 9 of them already on hand. I'm a huge fan of the Bauer tool line for the price.
@3tailsRV
@3tailsRV Ай бұрын
is this the V2 or MK3 version?
@coz3d
@coz3d Ай бұрын
The body is MK3 and the dome MK4 so the most recent versions at the time I did the build!
@3dprintingteen164
@3dprintingteen164 Ай бұрын
Bondo and acetone is gonna be a life changer 👁️👁️ thank you 🙏
@coz3d
@coz3d Ай бұрын
Use in a well ventilated area but yeah, it speeds the process up A LOT!
@nippsliter3318
@nippsliter3318 Ай бұрын
If you want an alternative you can also use a little water mixed with spackling wood filler.
@rekoj7524
@rekoj7524 Ай бұрын
On my Bucket list as well to print. I also had the Don Post mask but lost it in a Houston Texas Storage unit, It melted in the summer heat.
@coz3d
@coz3d Ай бұрын
That's a huge bummer it melted! They are becoming kind of rare these days. Hate to hear that.
@rekoj7524
@rekoj7524 Ай бұрын
@@coz3d No doubt me too. Still a little sour over it. lol
@leeroyroy
@leeroyroy Ай бұрын
Great job also naming all the sandpaper and paint types, can i ask where you got the nippers for snipping off the plastic weld legs i need to get a decent pair myself
@coz3d
@coz3d Ай бұрын
Thanks! The side snips I use are these: amzn.to/3O4szed
@leeroyroy
@leeroyroy Ай бұрын
Brilliant just bought a pair
@azkards
@azkards Ай бұрын
👍
@windforward9810
@windforward9810 Ай бұрын
Where the link to gonz order site to order the light, just face book listed. Thanks
@coz3d
@coz3d Ай бұрын
Yes unfortunately that's the only way to contact Gonz that I know of.
@windforward9810
@windforward9810 Ай бұрын
@ saw that later I need to learn to read everything 1st lol
@michaelcarey8388
@michaelcarey8388 Ай бұрын
is the helmet too big or too little for your head?
@coz3d
@coz3d Ай бұрын
The interior is large enough for my head if you remove the adjustable helmet ring. The black series helmet rings never fit me and I don’t even have a large head! This one is the same
@mikem-ui8nc
@mikem-ui8nc 2 ай бұрын
Can you guys do a video on the mK3 hub to body attachments? I have seen your legs to body attachment(part 10) video however all I could see in the video is the front of the droid and it would be great if the view could be on the side where the hubs connect.
@coz3d
@coz3d 2 ай бұрын
I will put that down on the list and see if we can't do a video for you!
@Westcoast10
@Westcoast10 2 ай бұрын
Not me wishing the armor was wearable 😂
@coz3d
@coz3d 2 ай бұрын
If it was wearable it would have been even more popular, I'm sure of that!
@Westcoast10
@Westcoast10 2 ай бұрын
@@coz3d crazy how the armor looks amazing compared to the 🗑️ costumes rubies produce
@BenjoReacts
@BenjoReacts 2 ай бұрын
Gonz is the man for sure! Very knowledgeable. Has what ya need. And absolutely cool to work with from what I heard and seen. I hope to do business with him sometime. I went with the Astropixels myself. But pretty much similar. As for the wiring in the dome, I didn’t tape anything. I peeped through the rear door of the body and looked up to the dome as I was spinning the dome with the remote. Nothing was even close to causing an issue. So I didn’t think it necessary since no one will see it. Not enough wires to consider it messy. Your droid dome is on point! Great work!
@coz3d
@coz3d 2 ай бұрын
Thank you! It's been a fun build for sure. I need to try the Astropixels on my next build. I've heard great things about them.
@quadcopterreviewsandmore6864
@quadcopterreviewsandmore6864 2 ай бұрын
Did you have to resize the ring gear? If so, what percentage?
@coz3d
@coz3d 2 ай бұрын
I did not have to resize it. It fit for my susan so I guess I was lucky.
@dog2bert
@dog2bert 2 ай бұрын
Please post the link to the files on Thingiverse
@coz3d
@coz3d 2 ай бұрын
It was stuck in STL purgatory apparently. Fixed now and linked in the video description and here: www.thingiverse.com/thing:6791447