I would love for you to post some pics of what the twist in the cables normally should look like on both ends.
@liamboyle919940 минут бұрын
Well, I certainly didn't even consider this😂 I will be adding this to my knowledge base
@royhoglund132246 минут бұрын
Great tips! Thanks for sharing.
@wcwcgarner2717Сағат бұрын
I love my gas strings on my Mathews V3X I have put 1k shots through them no stretching. I am pulling 78# on 75# mods No Twisting the cables
@CMac0517Сағат бұрын
Awesome video! I've had three sets of "Match" strings on my 29.5" Lift and the poundage drops several pounds after several hundred shots. I just ordered Y'all's strings for it yesterday!
@JeffJenkins-f8jСағат бұрын
Awesome info, thanks for the excellent support!
@budekaiСағат бұрын
This is a great tip. I haven't seen this anywhere
@Aldocello112 күн бұрын
So my first go around with installing my new strings on my Phase 4 33 didn't go too well, that's because I did not follow specific procedures, needless to say I spoke to Aaron over the phone, had another go at it with a new set and everything ended up spot on, had to adjust one cable to get my cam timing proper, but once all was said and done, Peak weight was exactly 65.3, Spot on, axle to axle was 33, brace height was 6.5, my draw length was exactly 29, everything to spec the way it should be, so do yourself a favor and watch this video 250 times lol and follow specifically when he speaks on the yoke twists and The cable twists ...
@IZZYR2313 күн бұрын
Order some yesterday, I can't wait to try them
@Aldocello117 күн бұрын
Is it normal that after installing new strings and cables to find that your peak draw weight might have dropped 4/5 pounds, and is the correction twisting the cables each cable the same amount to get that draw weight back ?
@1958djw17 күн бұрын
nice, helps explain some elements I did not understand.
@user-xy1zd5kc4w28 күн бұрын
Wut bout for recurve
@MichaelWillerton-mk8mkАй бұрын
Hi can you tell me which press you use. Please.
@joshflanery135215 күн бұрын
Looks like a spikes press
@fahlvfaust6772 ай бұрын
No serving on loops? Or use white serving?
@BoilerTimmay2 ай бұрын
Is the cable routing on the rollers at 12 minute mark correct, and is that the same on the phase 4 29? I am seeing discrepancy on this as I install my new GAS string.
@GASBowstrings2 ай бұрын
Hello. If you could email us at [email protected], we will get a string tech to help you out with your strings and answer any questions you may have.
@trashrelocationengineer64722 ай бұрын
Dropped off my Obsession, yesterday, to get restrung. I wanted Catfish, but shop owner said he only uses GAS and won’t use any other. Interested to see the outcome.
@GASBowstrings2 ай бұрын
Hello! Happy to hear that you're giving our strings a shot!
@weshedges53063 ай бұрын
The strain is amazing. Low vibration, and noise. Very comfortable to shoot.
@06roadking693 ай бұрын
What color combo is that?
@GASBowstrings3 ай бұрын
I believe the color combo was Rooter and Black speckled with Buckskin serving. If you are interested in purchasing Rootbeer and Black speckled, it's currently not an option on our website, but you can call us at (606)-612-5156 or email us at [email protected] and a customer service representative will be able to help place the order for you.
@thebowbeginner3 ай бұрын
How do you get the Axle out of a Title 38? I am trying to change the Yoke Strings and cannot get the Axle out the way you showed.
@GASBowstrings3 ай бұрын
Hello, if you could email us at [email protected], we will get a string tech to help you out further. You can also call us at (606) 612-5156!
@RickPelz-dz5ub3 ай бұрын
Replaced my bow string with gas strings. 30 arrows into shooting my serving on where your clip the arrow started the fray and came apart. Not happy
@GASBowstrings3 ай бұрын
Hello Rick. I'm sorry you aren't happy with your strings. f you could send in some photos of your center serving to our email at [email protected], we will get a string tech to help you out further!
@knaveDave3 ай бұрын
Can’t even see what you’re doing
@codyperkinsoutdoors3 ай бұрын
Vid is dope!
@brycekearns2074 ай бұрын
Had my local shop who is a GAS dealer install a set of ghost strings on my vxr 31.5 axle to axle is now at 31 and 3/4 inch anything need to be done or is that normal only have about 200 shots on them?
@GASBowstrings3 ай бұрын
Hello! I would send an email to our techs at [email protected], they will be able to help you out further!
@jeffgenchi58634 ай бұрын
Just ordered my first set of gas bow strings. Installing later this week
@michaelh39264 ай бұрын
>>>------------>
@timmclaughlin62144 ай бұрын
This could be interesting. Put these with Nika n3? Arrows be zooming.
@dougeldredge4 ай бұрын
can yall make any length strings? ive got longbows and recurves,and a crossbow, 25 in w /24 strands ,68 in longbow, 50 in ,longbows
@GASBowstrings3 ай бұрын
Hello! So these strings would just be for recurve barebows or Olympic barebows. Our custom Recuve+ strings can be made to any custom length.
@mikehealy18364 ай бұрын
It must be worth spending as much on a string as I spend on a single arrow, if it improves performance
@pedromariano63404 ай бұрын
Se fosse filmado de mais longe ficava melhor!!!
@TangoOne6 ай бұрын
I love my 33, can't wait to put a set go Ghost strings on it but the factory match strings have been phenomenal so far, I can't justify swapping them right away like previous bows.
@APWPaint6 ай бұрын
People can say whatever they want about price bla bla bla. I bought a set for a fairly obscure bow (Martin Carbon Featherweight). There were a few missteps but, Aaron went above and beyond to get me squared away. OK it took three tries to get it right BUT, no hassles no complaints no BS. Bow is back together and shooting great! Thank you, Aaron and GAS, I'm a customer for life.
@dr.binjohnson77767 ай бұрын
Replaced my zebra strings on my mathews with GAS, best string on the market
@kenrobertson14637 ай бұрын
Great time listening to your string replacement. Mathews and a San Diego bow shop said the lower cable goes on the outside cable.
@jwopd7 ай бұрын
What about the folks who don't go to dealers and have their own bow shops in their garage?
@josephfolsom20307 ай бұрын
Very nice offer
@allenupnorth21917 ай бұрын
Hard when your nearest dealer is well over 100 miles away and its winter time..
@noahmathewson81707 ай бұрын
Is there a way to order a custom set through a dealer. Picking the stings and colors you want?
@GASBowstrings7 ай бұрын
Absolutely! You will be able to order whichever sets and colors you would like with a dealer.
@pre_ban_andy7 ай бұрын
Hey i get it, but money doesnt go as far as it did and archery is an expensive hobby. I work on my own stuff because of it. That said, ill be buying strings locally and doing my own work. You guys keep doing you, but not listening to the market is always a risk. Best to you all, and no ill will toward you at all.
@jeremymcclanahan23897 ай бұрын
best in the business
@kurtmcclelland87317 ай бұрын
As someone that has done business for 30 years (in another industry) through independent dealers I appreciate your effort to not undercut your dealers. Thanks for making a great product.
@bloodlines96107 ай бұрын
Match strings are quality. But when they go im gonna go with THREADZ .
@THEWOODLANDPURSUIT7 ай бұрын
Can’t wait to get your new string for my Lift 29.5. Was very interested to see the quality of Mathew’s new match strings. Needless to say not nearly as easy as gas strings to dial in that peep. Definitely having peep rotation issues with the match strings.
@g-man22287 ай бұрын
Looks longer than 33, but ok…
@TangoOne6 ай бұрын
That's because the riser is actually longer than the ATA
@pennyontrack7 ай бұрын
Why are your strings better than the match strings on the bow stock?
@tomshelly17 ай бұрын
Because they’re going to lose business now.
@Unclefacts7 ай бұрын
@@tomshelly1 lawl yeah right. no one builds a better string than gas.
@bennycartlidge84634 ай бұрын
What color are the strings on the Earth colored bow? Or what color matches the new Mathews Earth?
@GASBowstrings3 ай бұрын
@@bennycartlidge8463 If you are looking for brown colors that match closely to Earth, our Buckskin or Sand string would most likely be the closest. Our OD Green, Kiwi, and Ghost XV Camo all look great with Earth as well.
@anthonyloveless18928 ай бұрын
Are there camo gas bow strings for the V3x 29?? Iv been looking for custom camo or even that what was it called buck skin silver?? I'd even run them..but yeah could u answer that question foe me please..and thank you
@GASBowstrings7 ай бұрын
Hello Anthony, we have our Ghost XV Camo and in High Octane, we have Winter Camo, Tactical Camo, Woodland Camo, Forest Camo, Camo, and Autumn. Some other solid color options that are great for hunting strings are Buckskin, Gunmetal, Kiwi, and OD Green. Each of those colors are great serving options as well! If you'd like to take a look at some of these string colors on bows, check out our Color Galley here: gasbowstrings.com/the-color-gallery/
@isaiah38988 ай бұрын
Which way is the twist on your strings
@sewerplant13788 ай бұрын
anyone know who makes that press
@shannonoran63292 ай бұрын
Its the SPIKE Press
@killnme62129 ай бұрын
Thank you! Hope you have a great day! I’m going to shoot my new strings!
@owsowmuskwanaistus92139 ай бұрын
does someone fart on the strings to add strength ? lol
@keltonblack7629 ай бұрын
bottom cable on the inside roller for all models??? I shoot a vertix, thanks!