Another video said that the spark plug torque was at 13 I believe. it's in the manual if you have it, he did show it from the manual. Also where did you get the real spark plugs vs the fake
@projectsbyj252 күн бұрын
Real ones from auto store. Fake ones from eBay
@Estoooopid4 күн бұрын
Who sold you the fake ones??
@projectsbyj254 күн бұрын
Bought off eBay thinking they were real.
@1986twlight5 күн бұрын
I hope just that problem Maybe spark plug lose I just paid off this Honda
@1986twlight5 күн бұрын
I brought it to get fix there was 3 cylinder there was a too many misfire The check engine when on Wednesday I brought to autozone it said coil and sparks plugs I just got it done last week Do u think it’s there lose And put a gas gasket got fix to and new oxygen sensor
@projectsbyj255 күн бұрын
So after all that, u still have a check engine light on?
@1986twlight5 күн бұрын
I have Honda 2011
@mds24656 күн бұрын
I have to replace these on my 2005 CR-V as well. Mine is a stick shift so I believe that at least one of the mounts is different on my car compared to the automatics. This is also the same process on a Honda Element as well.
@castillodejuarez10 күн бұрын
The box on the right is the fake one. I use to run These boxes for NGK on my gluer, and I can clearly see ugly pressure marks on the side of the box.
@gattaka2015 күн бұрын
Hello nice video, could you tell me what is that on the dash that will show you mpg ? Thank.s
@projectsbyj2515 күн бұрын
That’s a scanguage 2. Hooks up to your obd2 port. I mainly just use it to monitor my water temperature now.
@AgentAle4712 күн бұрын
@@projectsbyj25nice, where to get that? I want to monitor my mpg.
@jondoe692615 күн бұрын
i want to replace the fronts only. worried the fronts will never level out with the older rears. People were saying on amazon that these are not the correct height. Sucks something so simple has to be so complicated with such crappy parts.
@nicolasreed800219 күн бұрын
How much did the replacement struts cost?
@projectsbyj2519 күн бұрын
I think for the whole set it was like $450 or somewhere close to that amount
@mgbretro22 күн бұрын
How long did these last?
@projectsbyj2522 күн бұрын
So far it’s been 3 years since I got these on and I still drive them. They’re still holding solid.
@ajgomez256725 күн бұрын
Do u still have the crv
@projectsbyj2525 күн бұрын
Yep. Still my daily
@simonwolfendale79029 күн бұрын
Just purchased this 7023B model, but no logo option and cannot mirror link.
@projectsbyj2528 күн бұрын
There’s a whole bunch of different ran programs on there with same model number. if it’s the newer models said like updated, it might not have some features.
@SaulPinacho-dm7ds29 күн бұрын
😂 after you dropped them know you really need to gap them .. good job on the fuel pump
@RamandChevyOwnerАй бұрын
I got h1 on my aftermarket headlights for my impala.1 problem I came acrosss.My h1 is 1 prong and I see alot of 2 prong.I got another connecter on the left from the headlight bulb mount.Idk if that’s just there for something like the 2 prong h1 or not.Please help Im super confused
@projectsbyj25Ай бұрын
Hmms. From my understanding it should be 2 prong, a positive and negative. Check with the seller u bought it from and make sure it will work with your car
@RamandChevyOwnerАй бұрын
@@projectsbyj25 ok thank you.I found a adapter that goes from 2 prong to 1 prong
@marioarenas-le7eeАй бұрын
If just cut the belt?
@Eddie65001Ай бұрын
Excellent video i have the same crv with rear bottomed out. Ill be doing this asap. Thank you. Well done
@MrD-wr6ejАй бұрын
Yes... I feel the same situation.. Its about a month I had been use .. When running at about more 80mph.. my car jerk and lost power.. and even I throttle more .. it won't go.. But starting morning.. even during after warmup engine no problem for starting.. I buy new spark plug.. when I unplug this one.. the sharp shape become same as the video... Truly shock to see it Then I realise this fake one..!!
@robgehring9720Ай бұрын
Thank you for the video. Your instruction was perfect. Tightening the brake cable worked and was straighforward. You saved me $150+
@Adrian2140Ай бұрын
If you plug in a HDD to the USB is it gonna recognize it and play the media? Thanks for the content.
@projectsbyj25Ай бұрын
I haven’t tried it so I can’t say for sure if it will work or not
@therealitskai4668Ай бұрын
U can chat nf get to the point
@mopar2ya165Ай бұрын
To bleed brakes, you have a person push the brake down, then you open the bleed until peddle goes down, then close the bleed and release brake. Repeat until no air bubbles and clean fluid in hose. Check resevour every 10 openings and add as needed.
@HenryRsАй бұрын
After one year how does it feel compared to oem? Still in good shape?
@projectsbyj25Ай бұрын
I think nothing will be as good as oem but these ones are still fine. They’re stiffer than oem but so far so good.
@Leader2lightАй бұрын
That's wild how many upgrades you done. Very nice.
@Leader2lightАй бұрын
Put all LED on my 04 CRV. Well worth it.
@Leader2lightАй бұрын
Thanks for the video. For sure watch out for fake crap!
@duanechimoni6609Ай бұрын
I did the rears and had to unbolt the control arm, loosen brake line brackets. Driver side had to make sure not to damage the vent canister. The passenger side was another story. I had to cut & grind off the lower bolt. Then I purchased a 14mm x 77 bolt at Tractor Supply to replace the broken lower bolt. but it was worth it to replace the old leaking & rusted struts.
@theboris5566Ай бұрын
I've been having the same problem with my 03 honda crv. i have codes for all cylinders miss firing and a code for random miss fire, i've tried replacing coil packs and spark plugs ( cheap ones). and i'm still having miss fires and idle issue. do you think it's because i used cheap spark plugs? I just don't want to go out and buy those expensive ones and it not work.
@projectsbyj25Ай бұрын
i would just spend the money on the expensive parts and get it from the auto store. In that case if it doesnt work out, you can always return it to the store and get a refund.
@1986twlight5 күн бұрын
The problem started on I would say Wednesday the light went back on And the car sign with slippery sign on it to
@1986twlight5 күн бұрын
So I brought it back to the mechanic on Thursday. They still haven’t looked at my car yet because they’ve been so swamped over there with other cars.
@1986twlight5 күн бұрын
I just hope a loose spark plug or something there’s a warranty on it a year warranty. I wouldn’t have to pay anything.
@projectsbyj255 күн бұрын
@@1986twlight let’s hope that’s the case and they just take care of everything.
@mr.sept.5790Ай бұрын
Fake ones are erodium tip😂
@Matt-rq6wzАй бұрын
Highly recommend the alternative method of going from the passenger wheel-well. Especially if you have a 1/2 impact. The water pump is easily accessible from here once the crank pulley is removed. A great time to replace the crank seal too. It’s nice to have a set of long boy ratcheting wrenches not required.
@Justin-412-BrownАй бұрын
Trash hook up
@claudebailey1122 ай бұрын
You dont need to remove the engine mount either ,just the power steering pump ,the over flow bottle,the radiator fan and the front grill then the radiator holder brackets.
@claudebailey1122 ай бұрын
You dont need to remove the intake..I just did my cousins 02 crv...
@jec_2 ай бұрын
Very helpful!!! New owner of a 2003 LX good to know the tire option
@sageoliver85262 ай бұрын
Great video….not so easy to do this on 97 Ford f150..now I am not afraid to do this on CRV
@petersack50742 ай бұрын
1. Remove Belt 2. Pour ARMOR ALL - into small container, one large enough to hold the folded-up belt. 3. SOAK said belt, in solution OVER NIGHT 4. Install belt on engine. 5. N O more noise. Maybe, use a wire brush - or sawed off end of one - on a stick - CLEAN all V pulleys' on engine of G U N K. n ( BE creative - in finding out solutions....)
@BlackyBrownDestruction93372 ай бұрын
I missed my b series...
@fluxrevert87092 ай бұрын
The crowfoot tool thxs! That's what I was looking for!
@TayTalent2 ай бұрын
Is this a great radio if so why is it a great product to buy ?
@projectsbyj252 ай бұрын
Honestly it’s just very cheap, has back up camera and Bluetooth capable for hooking up music from your phone to your car. Also as the option to boost audio sound. Really, it’s just a cheap overall unit that if you just want to Bluetooth your music. It does the job. Another plus is being able to completely turn off the screen and still have the stereo working, Helps me with driving at night cause then i won’t have glare from the illumination of the screen reflected off my glasses.
@HardKnocks160s2 ай бұрын
Did this help with idle vibrations in drive?
@projectsbyj252 ай бұрын
Yes, replacing your mounts can help with that. As far as window caulking them, mine I have no issues but others have said they feel vibrations which would makes sense since you’re basically turning a mount into a solid piece.
@sirisakpimchan70142 ай бұрын
Permatex Belt Dressing & Conditioner. TYPICAL APPLICATIONS • V-belts or flat belts of rubber, leather or fabric • Automotive • Farm equipment • Industrial belt drives Note: Not recommended for use on serpentine belts
@kenneth8012 ай бұрын
I like your videos. I got a silver ‘04 crv with a standard transmission. I’ve had the clutch worked twice. Had a code earlier this year for IMRC solenoid replacement. I would like to do CV axles as my rear is leaking grease and bearings for sure. I get bad vibration at 50mph and it kind of goes away at 62mph. Any thoughts? I feel it all over the car hard to pin point. Not a tire issue imo. Good on ya for making videos on this gem of a Honda!
@projectsbyj252 ай бұрын
Thanks, yeah I don’t see much crv repair videos on here and figure I just make videos myself. As far as the vibration, could very be the axles itself, check your motor mounts also. Check shocks and the bolts holding the sway bar and bushings. Double check all suspension components. Other than that, last I check would be the tires
@SFMCOLLECTIVE3 ай бұрын
Real good stuff brother your the man!
@user-uu3pv3yn1h3 ай бұрын
ฉันขอบคุณความรู้ที่ดีสิ่งที่คุณทำ
@TheIsaiah2353 ай бұрын
Good work bro. I’m going to be replacing my mom’s Crv studs.
@projectsbyj253 ай бұрын
Nice. I haven’t done my rear yet so I don’t know how that one goes but this pretty much works for the front
@BrandonPerezMusic3 ай бұрын
i have the 7023B and it doesnt give me the option to change it.. is there and update??
@projectsbyj253 ай бұрын
I’m sure there is but I heard it’s more trouble trying to update it than it is just buying a newer updated one.
@BrandonPerezMusic3 ай бұрын
@@projectsbyj25 Should get my dash trim today from O’Reilly hoping it’ll work this time.. ever find updates for these? I’m not able to change the wallpaper or logo
@erikvil453 ай бұрын
Excellent video
@projectsbyj253 ай бұрын
Thank you
@MrRedHotChiliMan3 ай бұрын
What brand of gasket did you use? Also, did you happen to adjust the valves while you had the cover off?
@projectsbyj253 ай бұрын
I have not adjusted the valves. Probably would’ve been a good idea. Brand I usually use for the valve cover is just fel-pro but in this video I believe it was just a random brand I got from Amazon