@@slatsgrobneck7515 thanks, it was pulling really hard for me that day
@ZyllusEntry4 күн бұрын
I just bought some for my for my trailer. I connected the Bluetooth piece to my truck and for some reason there not lightning up when I hit the breaks or turn signal but they'll turn on when I unlock the truck? Im confused on how that can happen I checked the fuses but its not that either?
@AndyFromm4 күн бұрын
@@ZyllusEntry running lights work on them? Might have to get a trailer plug tester
@willsellner24275 күн бұрын
How u make those adapters
@AndyFromm5 күн бұрын
@@willsellner2427 lathe & mill
@idkwhatimdoing84277 күн бұрын
Where did u get the gasket kit? I bought a new pump but It didn’t come with the replacement gasket
@AndyFromm7 күн бұрын
@@idkwhatimdoing8427 i can't remember for sure, good chance I got them from the dealer.
@folong5337 күн бұрын
What’s your mpg
@AndyFromm7 күн бұрын
@@folong533 normally low 20's, was single digits with the v10 gas
@DIRTVENTURE8 күн бұрын
Eeeww. Yes please. I wanna see that one rollin
@kl-ly2xh8 күн бұрын
does it blink automatically when braking ?
@AndyFromm8 күн бұрын
Lights up brighter when braking, just like a wired trailer
@davidnazario664612 күн бұрын
Cool machine 👍😎
@AndyFromm12 күн бұрын
@@davidnazario6646 thanks 👍
@superdavepumpkinpatch520512 күн бұрын
Hahaha this is badass. I just brought home an 806 and a 300 today! Life goals right here lol😂
@AndyFromm12 күн бұрын
@@superdavepumpkinpatch5205 nice, thanks 👍
@justtruth828112 күн бұрын
We had a model D 1949. It got the job done but not as nice of a machine as yours!
@AndyFromm9 күн бұрын
Nice. I really wish the differential was unlockable
@justtruth82819 күн бұрын
@@AndyFromm The model D could push up a mound of dirt. A real work horse.
@WilliamCarr-tn5qp14 күн бұрын
Wow that's great
@jeffkilgore632015 күн бұрын
Also baling wire.
@jeffkilgore632015 күн бұрын
Is mounting the only problem? If that’s all it is, figure it out. Use hardware.
@AndyFromm15 күн бұрын
@@jeffkilgore6320 thats the only issue I've had so far, I haven't had to use them in about a year now
@animalpants16 күн бұрын
So awesome
@BrandonGege16 күн бұрын
Why are 7.3 so reliable? Ford did not make the engine international did i drive one with 450,000 miles on it!
@AndyFromm16 күн бұрын
@@BrandonGege navistar also made the 6.0/6.4 and they weren't that great 🤷🏻
@superdavepumpkinpatch520517 күн бұрын
Just what i needed, just bought my first diesel and shes just like your 806. Drove her home with whiny steering and similar leaks to yours but she made it. Your in depth info will be extremely helpful as i start fixing her up-
@JohnWarren-n9t20 күн бұрын
2 phunny😂
@MrHammGutsnGlory24 күн бұрын
Question: Your machine does not have a power steering pump?
@AndyFromm24 күн бұрын
@@MrHammGutsnGlory it has power steering, I assume it's just part of the crank driven main hydraulics. I doesn't have a separate pump.
@elroyelblander627724 күн бұрын
🤣🤣👍👍👍.. .I forget what ring/ pinion you've got in there..I suppose it's just the rpm difference,but anyway 👍👍👊
@AndyFromm24 күн бұрын
@@elroyelblander6277 stock, just rpm 👍
@PhilDeMars-c3p24 күн бұрын
Holy shiiiitttt!!!!
@oakridgeboy202326 күн бұрын
Keep em coming good stuff bud
@oakridgeboy202326 күн бұрын
Keep up the good work
@AndyFromm26 күн бұрын
Thanks
@GuillermoTirado-g7x27 күн бұрын
Chingonsicimo el M 4 BT
@AndyFromm27 күн бұрын
@@GuillermoTirado-g7x gracias
@elroyelblander627728 күн бұрын
👍👍💪 right on feller 👊🍺🍻
@GuillermoTirado-g7x28 күн бұрын
Tengo un 504 le haré la misma conversión
@AndyFromm28 күн бұрын
👍
@GuillermoTirado-g7x28 күн бұрын
Lo tiro lejos
@AndyFromm28 күн бұрын
🤔
@superdavepumpkinpatch520529 күн бұрын
Badass!
@ronzezulka664629 күн бұрын
You sir,,are a frigging maniac!!!
@AndyFromm29 күн бұрын
😂
@ronzezulka6646Ай бұрын
Yup,,,maniac tendencies,,,lol. So cool Andy.
@AndyFrommАй бұрын
@@ronzezulka6646 lol, thanks
@strong40Ай бұрын
Is this stock trans and rear axle? It's amazing it holds up to the extra power and not explode
@AndyFrommАй бұрын
@@strong40 it is stock, never opened by me. This rear has only been on this tractor since this spring. The last rear & trans was stock and unopened by be as well for about 8 years. With that said, this one is noisy so I might swap some parts from the original trans into it.
@rudycarlson8245Ай бұрын
Redneck drag racing
@ihus9950Ай бұрын
lol 👍🏻
@leeharris3061Ай бұрын
Holy crap that thing flies😂 and ALL the smoke too..sooo cool 👍🏻🍻🍻
@AndyFrommАй бұрын
It's fast.. Thanks 👍
@donvoll2580Ай бұрын
Good day Andy Ths for showing
@r.hazelwood4885Ай бұрын
What's going on on the farm?
@AndyFrommАй бұрын
@@r.hazelwood4885 not much now
@ihus9950Ай бұрын
👍🏻
@ady-bdavid1173Ай бұрын
💪🏼💪🏼💪🏼 That was an awesome pull!
@AndyFrommАй бұрын
Thanks 👍
@ady-bdavid1173Ай бұрын
Is this 4bt modified in any way?
@AndyFrommАй бұрын
@@ady-bdavid1173 just the fuel side
@ady-bdavid1173Ай бұрын
Pump or spring?
@AndyFrommАй бұрын
Fuel pin, gov spring, & injectors
@jackalopegtoАй бұрын
I believe the reason the belts are different lengths is to let the loose hay fall out from between them and doesn't get packed behind them. With my 566 I still have to clean it out regularly. 🙂
@AndyFrommАй бұрын
@@jackalopegto could be but like you said I have to clean mine regularly too especially fine grass
@swmncncАй бұрын
I think I saw this driving in New Ulm MN yesterday? Different hood though. Sounded fantastic.
@AndyFrommАй бұрын
@@swmncnc yes I picked up a old "new" cobra hood last summer, haven't got it painted yet so its gray. Thanks 👍
@elroyelblander6277Ай бұрын
👍👍👍👍.. how hot do thing's get on the 4BT??
@elroyelblander6277Ай бұрын
Perhaps you don't worry about that 😂
@AndyFrommАй бұрын
@@elroyelblander6277 that shaky little thing has killed every gauge i put on it. It smelled warmer at the end than when I give it all the beans in a high gear.
@elroyelblander6277Ай бұрын
@@AndyFromm I imagine it does...vibrate like a bastard...do u have a pyro on there or?
@AndyFrommАй бұрын
@@elroyelblander6277 no pyro but I just ordered a boost, Pyro, & temp combo gauge to try. I got it in my f800 but thats in the cab & this is electric so we'll see how it works
@elroyelblander6277Ай бұрын
@@AndyFromm 👍👍👊
@elroyelblander6277Ай бұрын
👍👍👍👍💪👊
@ihus9950Ай бұрын
For a Minute there, I thought you were going to pull around the Fair grounds lol Sure is a great Tractor that M of yours 👍🏻
@AndyFrommАй бұрын
@@ihus9950 haha yeah 😆 Thanks
@ihus9950Ай бұрын
Good job Andy 👍🏻
@AndyFrommАй бұрын
Thanks 👍
@zekeoutdoorsАй бұрын
Thats a fuller pull
@AndyFrommАй бұрын
@@zekeoutdoors thanks
@winrowfarms5494Ай бұрын
AWESOME PULL
@AndyFrommАй бұрын
@@winrowfarms5494 thanks
@garyhoward3123Ай бұрын
Thanks for info. Have ramps on my Vermeer and they are not very good at all .
@AndyFrommАй бұрын
@@garyhoward3123 I've never used ramps but can imagine. I have had maybe 3 times it didn't kick right on flat. I mounted a cabcam up under the back of mine, I can see the wrap get pulled in, cut, and if the bale kicks.
@garyhoward3123Ай бұрын
I see now how the kicker works. Looks like the rear gate powers it instead of its own cylinders. In that set up it does not stay extended while the gate closes and on a slope the bale could come back too close. Thanks
@AndyFrommАй бұрын
@@garyhoward3123 yes
@garyhoward3123Ай бұрын
Do you need to backup when wrapping ejecting? Thinking about buying a 435 with kicker.
@AndyFrommАй бұрын
@@garyhoward3123 on reasonably flat ground, no the kicker will do the work. If you are on a slope wrong, its good to back up.
@elroyelblander6277Ай бұрын
👍👍👍..once u make some adjustments,are u gonna till the garden and rake hay with it🤔🤣🤣👊
@AndyFrommАй бұрын
@@elroyelblander6277 i could
@Theblue12vАй бұрын
Hey Andy do you think this swap will work with a 53’ farmall super M
@AndyFrommАй бұрын
@@Theblue12v exactly the same as what I did just slightly different rear axle