Looks like ti makes a huge dust cloud. Does this thing work well in the rain? Want to avoid making a big scene in my front yard

Thomas Brian Jones Donna Garcia Kevin

Gonzalez Angela Gonzalez George Anderson Gary

Williams Kenneth Harris Christopher Williams David

Thank you for the video. I'm trying to find something to cut the weeds in a 4' - 6' wide ditch. The sides of the ditch are at a 45 to 60 degree angle. The ditch depth varies from about 1 foot to 3 feet. I can bush hog the bottom of the wider portion, but I can't get the side slopes. The ditch is 600 feet long and I've been using a handheld stihl r131 weed eater with a brush blade. I'm 67, and it's starting to wear me out. Would this thing do the side slopes?

It would have been nice to SEE your mods better than just showing your face but nice mods!

I think you need to fix that hole in the top so you don't have so much dust flying around.

You always need a ballast on the rear 3 point when working the fel.

Actually one does not have to remove any of the side panels to access the oil filter. I change my bx oil without removing any panels. There is a cut out which allows access to the filter. Also pre fill is not at all necessary. If fact it can do damage to the engine. Just Google it an see for yourself. Caterpillar recommends to not pre fill filters. That practice is left over from days gone by.

Someone actually doing the tests properly. Good work

Good video for a BX three point hitch. Thanx

My neighborhood kid has grown up and moved away so raking leaves is up to me. I'm getting too old for that now and this machine looks like the ticket. Once thos Maples start dropping it's a sea of leaves around my property.

hi am from Canada do you have a dealer in here ?

What kind of sheer bolt pto is that? The majority of sheer bolts that I have seen run through the shaft.

Cyclone Raje is the best investment I ever made. 25 years on my unit.

Вот это реклама!!! Покупать сразу перехотелось, только спички дробить!!!

Great info- but if u feel like u gotta bail 60 seconds in,- just go to settings and put it on 1.5x speed. Pefect that way- enjoy!

Great video keep them up great learning video

The top of the ROPS indicates the angle your neck will break if you ever roll it. Should only take a few seconds to die…

Don't need a history, just get to it

Совсем хрень детская игрушка

Did you really go to all that trouble to upload absolutely zero content?

I like how you said we but there is only one person doing everything, not ever even in the video.

I have all the first three. Spot on. Ditch light after that, then tool box

Great work sir

Thanks for sharing. I just rolled my multione over... and corrected it, but did not want to start it until I knew what to check. Now I am greatful i checked your vid. Will have to check the engine for fluids ontop of the pistons.

Would have been much faster if you put your dump trailer closer to the fence

Dumbest video I've ever seen.

Great job dad!

Love my cyclone rake ! Great product support.

Thanks for the video , we all have to start somewhere, and watching others do it helps us to understand better 😊

I want to see a video about the hedge trimmer you mentioned. I put the fuel filter relocation kit on order. This was an upgrade I wanted for my BX, but wanted to order a kit. This is the right way for me to make this mode on my BX. Thanks for sharing. Enjoy The Journey - Cheers

I just got the stuff for my maintenance I could not believe how much price increase it was. It was 500 in materials for my machine. Not sure what to do on that plug. Maybe weld a pry bar of sorts to apply pressure out as you turn it. Drilling may put shavings in the axle. I guess you could vacuum the shavings out. Good hearing your voice and seeing a video from you. I wear my o&d life shirt a lot but it’s nearly wore out.lol😊

Welcome back, so nice to see a video from you 👍

I have 25 hours on mine, dug a 600' trench on very steep uneven ground. Getting on and off and rotating the seat has been the only real difficulty. I'm mindful of the pinch points and bumping the control levers. I'm happy to hear you didn't get severely hurt. The BX is small and cute but don't think it's any less dangerous than a larger tractor.

People like to poopoo on this device but I’m a spine surgeon and I’ve seen so many paralyzed people from ladder injuries. I’d trust this more than any ladder and am ordering one myself. The caveat for me is I’m adding a plywood floor and reinforcing all of the wall corners with chain or cable. I’ll also use chain to secure it to my pallet forks. I’m getting the one on casters and do not intend on folding it up once set up. I may also reinforce the welds but we will see.

Wow so you are telling me I can slip the clutch by hand? Will that get rid of whatever might be causing the clutches to sieze or bind up? I am going to come back here if anyone can answer this question, I saved this video to watch later. Also if you can slip the clutch by hand, just think of the time and effort of not having to get on and off the tractor, start the tractor up, put on the brake etc....

Looks lik a pain in the ass to use . It needs an adjustable skid plate or wheel directly under the center so you can't bury it and scalp the grass

Working at a mower shop I was surprised when Cyclones came in for repair and learning the had plastic impellers. Don’t know if they all are plastic but that was the models we worked on.

Your best teacher is your last mistake.

Thanks for the video, I just got my Ai2 forks and can't wait to try them out.

Thanks Garrett for this video, I just received my Ai2 quick hitch and fork setup. I also went with their large light duty bucket.

Really helpful. I've had some close calls (sounds like everyone has), and based on this video, I'm going to make some additional preparations. Thank you!

Hey, hope all is well. As a dairy farmer I've learned when your dealing with wet hay a manuare . Drive up to where you want to start, rool your bucket and back drag what you think the bucket will hold. If not it will roll up into a round bale..lol ..try that ! Just roll your bucket, dig them teeth in ,may have to wiggle your bucket as you back up. Then scoop n go ! Thanks for the video , Bob from Little Pecker Homestead in Idaho

Emerson makes a sure switch

Where can I find a manual for the DR 3 pt. trimmer & the belt routing diagram. Finding different idler pulley setups online.

I think not being able to fill your bucket is more a function of the small bucket and no traction rather than the tooth bar. If you could hold more in the bucket than what hangs out it would stay in better. In getting the muck separated from the ground the tooth bar is doing it’s job. I have the piranha tooth bar on a B3200 and it is amazing.

Get on and pull yourself out!

I am glad you are not hurt. Thanks for the video. It's very informative

How does this thing do for ditch banks or around a fish pond? I'm trying to figure out something to simplify trimming around my pond