now if i can just find a dealer in the Florida Pan Handle who carries the 338 Gen 2 in FDE, i can buy one for my Ruger Precision Davidson Exclusive (Tan) 338 Lapua
@RaySanchezTBAC23 күн бұрын
check with Mile High shooting Supply in CO
@perez5249Ай бұрын
Awesome can. You need a tribble on your mic. Wind noise was distracting.
@pppoopoo71222 ай бұрын
That flash is crazy
@RaySanchezTBAC2 ай бұрын
10.3" with 193 does that. MK 318 ammo and the flash goes away.
@pppoopoo71222 ай бұрын
@@RaySanchezTBACwould love to see a video at night. Almost got one yesterday just off weight alone. Decibels are the least of my concern, flash, weight and back pressure in that order.
@MrLuckyStars2 ай бұрын
Sounds like Trump speaking. Nice video would have liked to see some 147s.
@austinyote17833 ай бұрын
Just ordered a magnus cb today i cant wait to try it on my 6.5cm coyote setup
@videocardzrule3543 ай бұрын
How would the Dominus SR sound on a 20” AR Gas Gun shooting 6MM ARC? I’m trying to get sub 140 at shooters ear. I love the TBAC Dominus SR.
@RaySanchezTBAC3 ай бұрын
should be below 140 at SE. I'll see If I can dig up a 20" something. All my barrels are short.
@Pippasaurus3 ай бұрын
Got my Fly9 back last week. First TBAC can. Been shooting it on my Glock 19 everyday. Tight groups, super light, and very quiet. I'm surprised how quiet it sounds despite the light weight
@RaySanchezTBAC3 ай бұрын
Glad you like it.
@Gustavo-bi4hv3 ай бұрын
Is that an AX50?
@RaySanchezTBAC3 ай бұрын
Yes. The Accuracy International ELR AX 50
@TruckVault_USA3 ай бұрын
Glad to hear the TruckVault and TruckGlide are treating you well!
@rickmarshall-hk5ys3 ай бұрын
Great info!..thanks for the video!
@9dollsELR3 ай бұрын
now I need to get a truck to get a truck vault lol
@TruckVault_USA3 ай бұрын
We make something for nearly any vehicle on the road. Security is not exclusive to truck owners 😉
@jesseshoots693 ай бұрын
Post op? Didn't realize you had a sex change...
@RaySanchezTBAC3 ай бұрын
hahaha that's good. I had to have a complete hip reconstruction. Still all original 1969 parts.
@bopjoe4 ай бұрын
would the 5” be good enough for very quiet suppression on 300blk sub or should i go 7 ? looking for compactness + quietest i can get but dont mind going 7 if 5 isn’t enough
@RaySanchezTBAC4 ай бұрын
7 is the way to go
@matthew50274 ай бұрын
Holy cheet!
@jdcamo14 ай бұрын
Awesome
@bozscaggzz74754 ай бұрын
What does MR, ML and SE stand for? Is one more important or significant than the other?
@RaySanchezTBAC4 ай бұрын
Mil Right Mil Left and Shooters Ear. Importance depends on what you are looking for. For rifles it’s shooters ear for me. With pistols it’s all kind of muddled
@user-sr7vw1wp2e4 ай бұрын
One the biggest detriment to barrel life is heat. Cleaning the bore after ever 3-4 shots, when you can help it, will greatly improve the rifles accuracy and barrel life. As an ELR shooter, its kinda sad to watch. For 13K, this man should have bought a barret.
@RaySanchezTBAC4 ай бұрын
This is endurance testing of a 50 BMG can on a 16” barrel. I don’t t care about barrel life for this test. Actually I don’t care about barrel life most of the time. I changed the barrel every 800 rounds so bullets didn’t go through the can sideways. I have a stack of new barrels for this. We did 4000 rounds like this on this suppressor.
@user-sr7vw1wp2e4 ай бұрын
@@RaySanchezTBAC I was wondering why the barrel was so short. Are the baffles impacted by the un burned powder?
@RaySanchezTBAC4 ай бұрын
@@user-sr7vw1wp2e Yeah the powder burns inside the can. This 10 round cycle gets the can to over 1000 degrees. This rifle now has an 18" barrel on it for demos for military, LE and civilians. I can still the the 750 AMAX out to a mile so for the urban sniping role its intended for the 18" is plenty long enough. I really like the 16" personally, just to keep it a little shorter. The baffles on this suppressor still look very good considering what I did to it.
@thegolflife75654 ай бұрын
Fucking flame thrower 🔥
@daviescott14064 ай бұрын
How long did it take for you to get delivery from Mad Pig Customs?
@RaySanchezTBAC4 ай бұрын
I don't think my delivery time counts as a representation of their backlog. They got me this one in time for SHOT 2023 and got me a new one this year for SHOT 2024. Both were rush jobs so I could have the rifles in our booth for SHOT.
@markopavkovic59916 ай бұрын
Dog wants someone to play ball with him
@RaySanchezTBAC6 ай бұрын
She always wants to play ball even at 11 years old.
@boatscrypto58567 ай бұрын
Is this compatible with .510 whisper or .510 Phantom?
@RaySanchezTBAC7 ай бұрын
Sure.
@StevenPfeiffer7 ай бұрын
Awesome video ray!
@benjamingallaher94437 ай бұрын
Great video! I will be staying with 30 caliber suppressors even for smaller caliber. Fewer worries for switching moving forward.
@1924Eugene7 ай бұрын
I know it is less impressive but I would love to see this same test done on an AR with a properly set up gas system (not mil-spec). Love my Ultra 7 on my 20" AR in .204 Ruger.
@RaySanchezTBAC7 ай бұрын
this shows a dialed in gas port verse a standard on SBRs. kzbin.info/www/bejne/ommaYYahdrh7a7s
@TimKollat7 ай бұрын
Looking for the most quite can(without being too long) for a lightweight 20" 308 hunting rifle. I like the Dominus just in case I want to run it on a 5.56 but liking that Magnus. Ive been considering Rugged Radiant, Abel Biscuit, Dead Air Sandman and Thunderbeast.
@RaySanchezTBAC7 ай бұрын
If you can deal with a 9” can the Magnus is the way to go. If you want short and lite weight Ultra 7 is hard to beat.
@controlledchaos88518 ай бұрын
I love this guy . Like legit I’m a huge fan . Like to the point I would like him to sign some shit if I ever get the chance to meet . That’s not a dick thing to ask right ? Like if he can do all that shit he can sign hat or Tshirt right ?
@controlledchaos88518 ай бұрын
I have a ar10 308 and I’m looking to get a 8.6 blackout barrel when they come out . Do you offer a 30cal end cap on the 338 ?
@RaySanchezTBAC7 ай бұрын
No replaceable end caps. The 338 can suppresses the 308 so well you wouldn't notice an end cap change.
@mikemoehrle85268 ай бұрын
The best rimfire can you can buy ‼️
@mariabrown12788 ай бұрын
Hell yes Hunter! Like a boss. Cant freakin wait till this can comes out!
@mariabrown12788 ай бұрын
Hell yes! Cant freakin wait till that can comes out
@biggwigg3388 ай бұрын
That's awesome.
@bunnytoo37108 ай бұрын
I am waiting for this can for my 33xc!
@3G4Runner_N_Gunner8 ай бұрын
I can not wait for this can! I really wanna build a bullpup 375CT off of a MKMachining chassis if they ever make a big boy chassis and throw this can on it.
@Kilo199210 ай бұрын
Are you guys making a suppressor for m82a1?
@RaySanchezTBAC10 ай бұрын
This will not work on the 82a1
@matthewkoren166711 ай бұрын
Can anyone tell me what tripod mount is that??
@RaySanchezTBAC11 ай бұрын
ordnanceresearch.com/stand-up-mount/
@matthewdoobay711711 ай бұрын
I pinched a cover on an ultra 9. Don't do that, guys... it launches your can, and it's like 800 dollars to get it re-cored. The big pig walking across the field is NOT worth it.... I promise.
@Zenergist11 ай бұрын
How much different would this be with an 8.5" 300 blackout ?
@RaySanchezTBAC11 ай бұрын
300 BLK through a 223 can is bad. Our Dominus is bad ass Will take supers from 5.5: barrel. Watch the SURG testing on it.
@Zenergist11 ай бұрын
@@RaySanchezTBAC hey, thank you so much for the response. I appreciate it. I realize that my question was somewhat myopic. I didn't realize that can was 556 only. I suppose what I meant was , on average, how many more rounds could you get out of 300 Blackout versus 556 before hitting 800 Fahrenheit? Not on that suppressor per se, but any titanium suppressor around 10 oz I have heard that 300 Blackout doesn't have as much muzzle pressure or heat.
@RaySanchezTBAC11 ай бұрын
@@Zenergist No worries. I do have an 8" upper I can throw on a lower and test. It would take several mags I would guess. I'll test it.
@Zenergist11 ай бұрын
@@RaySanchezTBAC wow that is unbelievably cool of you to do! I'm in the market for two suppressors. They are my first rifle suppressors. So much conflicting info. I really like the idea of lightest weight possible so titanium is attractive, but I worry about durability. I've heard that 300 blackout is gentler because it doesn't heat up as fast. Curious how that plays out in the real world. I'd love to know. I don't need to spray bullets, but I like the idea of getting into some carbine and 3 gun courses. Don't want to destroy a suppressor doing that though.
@m118lr11 ай бұрын
..COULDN’T HEAR you.
@oneounceslugAPEX11 ай бұрын
I guess the question to ask is... is 5 less decibels worth an extra 6-800 dollars.
@oneounceslugAPEX11 ай бұрын
You're the man for doing the nomad L and magnus...
@3G4Runner_N_Gunner11 ай бұрын
I'd love to see this on a 375CT. Can't wait till these become available.
@controlledchaos885111 ай бұрын
Saying your company’s product be smooth is like jerking off and saying what a big thick wang this is lol JK JK
@DoorKnocker11 ай бұрын
So, what's baseline (w/o suppressor)?
@RaySanchezTBAC11 ай бұрын
I would say in the 170 range
@briansimmerman5491 Жыл бұрын
I have 2 of these TD22. After couple years of owing/shooting my baffles are loose fitting now. What can be done?
@RaySanchezTBAC11 ай бұрын
Send in on RMA
@airwolf... Жыл бұрын
Sigh....*Opens wallet*
@LRRPFco524 ай бұрын
Ha ha!! Ain’t that the truth.
@SuppressedNation Жыл бұрын
I’d take it hunting that’s for sure! Good shooting