2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
Пікірлер
@geechyguy3441 27 күн бұрын
About to do this today, my only concern is does the entire car need to be off the ground? Cause I just have a scissor jack and 2 jack stands.
@jimsimm11 Ай бұрын
I'm hoping to do this this weekend on my 2011 but can't find that crank socket for 2011 -- they're all 06-10 or 12 and up?? where did you get it?
@efixes8010 Ай бұрын
Check Amazon
@noahdeering7713 Ай бұрын
Thanks man, really helped. I've had to replace 3 lug studs on my Subaru Forester and that $30 tool was well worth it! It unfortunately broke after the 3rd use, hopefully I don't need it again...😂
@natem.a547 2 ай бұрын
Could i replace the glass mirror part without removing the whole side mirror?
@efixes8010 Ай бұрын
Yes
@jasonkidd9375 2 ай бұрын
Sweet thank you 👍🏼
@johanacortez6779 2 ай бұрын
Great help !
@Ed_Gein 2 ай бұрын
the plastic piece busted on mine. can you just replace that or do you need the whole regulator and how do you replace that?
@efixes8010 2 ай бұрын
If you could find just the plastic pieces, you could replace only the plastic pieces but last time I checked, everything comes together
@Killkillkilldiediediez06 2 ай бұрын
This was horrible
@azomie9685 3 ай бұрын
Best video ever, leaving a like because this really helped my mother with her car, awesome video 👍
@davidtoth1913 3 ай бұрын
Good job explaining the procedure. Will be replacing the 2 rear struts soon. over 90,000 miles on my 2018 and its time.
@MrJarradMoore 3 ай бұрын
This video is perfect. Replaced a stripped stud on my 2012 Subaru Forester. In an hour. Stud puller ($9 Amazon) and the 8mm x1.25 hex bolt (got at autozone $3.99) to remove rotar are a must! Local car shop wanted to charge me $480 to do this! Thanks again for making this video!
@Erissa 3 ай бұрын
Thank you so much for this! The service center didn't reset it when my oil was changed recently and I was getting irked with still getting count down messages for my oil to be changed when I know it isn't needed yet.
@cesar.delacerda 3 ай бұрын
Awesome instructions! 🙏
@michael_christian9461 4 ай бұрын
Dosen't work i pressed the button and it only shows trip a and b
@mackenzielancaster7034 2 ай бұрын
Same here, I think we have to mess around with maintenance settings but I’m still trying to figure it out. Please let me know if you figured it out lol
@austinknight1471 4 ай бұрын
The goat good shit brother , I always forgot how to do it
@arby9984 4 ай бұрын
Thank you so much ! I did not want to go back to the dealership
@drivewaygarage1561 4 ай бұрын
I was wanting to do something like this but put in longer studs so I can put on wheel spacers for different Wheels I'm just not sure if longer studs would be safe would be safe
@efixes8010 4 ай бұрын
If you’re putting spaces the spaces, bring an attachment. Basically you attach the spaces to the original studs and spacer bring studs on it.
@drivewaygarage1561 4 ай бұрын
8 mm spacers so basically they fit between the wheel and the Hub
@efixes8010 4 ай бұрын
Yes
@stephenvaneyten571 4 ай бұрын
If you take hose top radiator makes it A lot easier to see
@jenniferhendrix3834 4 ай бұрын
Thank you very much! W mans
@Powderhoundguy 5 ай бұрын
Even after using the two 12 mm bolts I can’t get the rotor off… any suggestions
@Powderhoundguy 5 ай бұрын
Hey just realized, you gotta take off the parking brake to remove it as well
@efixes8010 5 ай бұрын
@Powderhoundguy If you’re doing the rear, you have to release the parking brake because if not, it touches the drums of the rotor and it won’t allow you to remove the rotor
@dubtroll 4 ай бұрын
8mm 1.25
@ronaldkipngetichsigei6489 5 ай бұрын
What of this error
@ryanbrown1980 5 ай бұрын
Wow!- Don’t do it this way kiddoes😬
@HoneyGuys-w5x 5 ай бұрын
Two 12 mm bolts
@dubtroll 4 ай бұрын
8mm
@HoneyGuys-w5x 4 ай бұрын
@@dubtroll thanks!
@cristical 5 ай бұрын
Excellent, it works, thanks!
@acer4462 6 ай бұрын
The amount of times I've forgotten how do this then come back to your video lol😅
@UncleOodoo 6 ай бұрын
At top dot, not over.
@ellierivera2792 6 ай бұрын
Thank you 🙏🏼
@theboove9423 6 ай бұрын
Thanks
@91gtsaul11 6 ай бұрын
I sent my heads off to the machine shop and when they come back my timing mark on pully on my driver side head won’t like back up when I try to turn my head to make it it spins past it
@efixes8010 6 ай бұрын
You need to hold it on Timing
@efixes8010 6 ай бұрын
Also are you using a new belt?
@abibodlogistics 6 ай бұрын
Vehicle manufacturers are just getting things complicated by the day,I rented a Ford Transit 250 cargo van and tried to reset the odometer to allow me know the number of miles that I covered and I just can't get it.I have gone to the settings but nothing like odometer setting is not coming up.Do you know how to get to the odometer setting.
@StreetRida3 7 ай бұрын
You're an absolute legend. I thought the threads were welded to the hub for some reason, you just saved me hundreds of dollars on a new hub and labor to press the bearing into It. Thank you so much!!
@Truckdriverdivorcee 7 ай бұрын
Terrible video
@carlosdzv1 7 ай бұрын
Isn't this bad for the wheel bearing?
@efixes8010 7 ай бұрын
No
@Slick_pollo 7 ай бұрын
Size of bolts ??
@efixes8010 7 ай бұрын
8mmx1.25 thread pitch
@kelseyenglish496 7 ай бұрын
That’s not a regular 2017 Kia Soul or it’s a newer model cause mine looks nothing like that
@efixes8010 7 ай бұрын
Idk maybe yours is a base model
@belindamesa5836 5 ай бұрын
Rest what
@vincentbrown1971 Ай бұрын
Same (I’m at work trying to figure this shit out)
@chadallen8217 7 ай бұрын
Would this be the same fix for a 2019 Crosstrek?
@efixes8010 7 ай бұрын
Yes
@PatrickZwisler 8 ай бұрын
How much for this job would it usually cost$?
@efixes8010 7 ай бұрын
It depends were you take it for service Usually it cost around $1100
@cora11m20 8 ай бұрын
Does the car have to be in neutral? My wheel hub won’t rotate
@efixes8010 8 ай бұрын
No, the car does not need to be neutral but the wheels need to be off the ground If you do not have a lift you could put it in neutral rotated where you need it and then put it back in park. But make sure you put something in the wheel so they don’t move front or back. If you doing the front one you could put the emergency brake on if you do the rear you need to put something in the front wheels so it doesn’t move
@GunslingerCenter 8 ай бұрын
Should I weld the Stud? cause in brazil i take to the mechanic, but he did the "eletric weld" while should be the "MIG weld" or i need find one "specefic stud?" and my model is 93 legacy, but the stud got loose when i tryed replace a flat tire
@Quamonster 8 ай бұрын
Just saved my ass man thank you
@marclashley2062 8 ай бұрын
This repair/replace is such a headache. My biggest issue is that parking brake drum. This is first video where the drum wasn't disassembled. 😊
@viktorbihar5384 8 ай бұрын
Chevy really made this one easy. Good video.
@dancooke6515 8 ай бұрын
Thanks for your video. I am curious, would this be the same process for the front or back wheel?
@tomsears2471 9 ай бұрын
I need to do this on my son's Subaru. Question. Would it make sense to change all of the studs since we have it off, or is it ok to just change the broken one?
@efixes8010 9 ай бұрын
If only one is broken, just change one
@J-SquadFishFam 9 ай бұрын
Thx bro
@egx161 9 ай бұрын
Hill assist is on the automatic cvts also.
@tvl99 9 ай бұрын
Unnecessary background noise.
@1windozesuk 6 ай бұрын
Not according to the other mechanics working in the shop, they don't care about his video.
@stevegustafson9414 9 ай бұрын
Of all the videos on this exact repair, i feel this is one of the very best. This is a man who is excellent at what he does, very sensitive, focused, and does what is needed in the most efficient way of any of them. Try listening to what the man says and why he does it - those of you who have issues with the video for whatever reason.
@STAIND12300 10 ай бұрын
Thank you:)
@ابراهيمالخافاجي 10 ай бұрын
الله يعطيك العافية