I am wondering if these cant be converted back to the linkage setup

Hi! I can disable tcm to install a manual gearbox ford s-max model 2012

PLEASE....I NEED HELP. 2012 FORD FUSION 3.0 WITH NO COMM, NO CRANK, NO START. THE PCM RELAY IS NOT WAKING UP. IF I GIVE GROUND TO THE PCM RELAY, THE CAR PCM WAKES UP. I BELIEVE IT IS NOT RECEIVING AN IGNITION SIGNAL? ANY IDEAS? PLEASE HELP THANK YOU IN ADVANCE.

Hello, everyone i am.here to get one suggestion, should we need to buy a Car which has PCM, Ignition coil and Gasket, replaced.... please let me know.

Great video, thank you

Broke a bolt the last one on the air intake manifold. Idk what to do i removed the flex pipe as well until i intall the new one im not driving the car currently sitting will that one bolt ruin my car ?whats best tool to extract it

GREAT INSTRUCTION THANK YOU.

Qué pasa cuando el sistema de bloqueo de eje de un Jeep Rubicon requiere servicio

Thanks for video gonna do this to mine tomorrow

Ryan Doyle good to see you. Long time. I have the same issue. Failed pcm

It really helps to know how much time it took for this procedure , no one ever seems to tell you that. Most of these types of vids are edited so you dont know

What will happen if you just leave it unplugged ?? My girlfriend has a 2016 Rubicon, and the sway bar light has been flashing/coming on since we came back from the beach about a month ago. Any and all advice would be appreciated !!!!

Just changed my spark plugs and everything went smoothly. Thanks for the video.

Would like to see how to program

YOU THINK IS POSSIBLE TO TRANSFER PATS, PCM FROM ANOTHER WORKING TRUCK AND IT WILL BE OK

Can you or do you have any additional information on Jeep wranglers. My is lighting up like a xmas tree. The dealer says they see nothing wrong with it. Plus, it's rusting out. I only have 21k mile and it's a 2018. Please help me.

Hey guys, great video and the exact same thing happened to mine. My mechanic replaced the fuse box unfortunately for $1100 which was probably fine, but how do you change those electrical connections? A new sway bar is $2400. Any ideas on how to change just the electrical connections?

You never posted what the solution was.

My crown vic is doing the same thing I swapped out the pcm and still have the same issue I also changed the whole throttle body also

Can you do this remotely?

So was the ecm the problem?

I really needed to let you know ! I applied your fix for my 2013 Ford Edge!! Thank you Thankyou ❤ Being a woman I was told to leave it , don’t know when they would get to it . 120 just look at it ! Uhhh Nooo . Get out of my way !! Took your advice and what a blessing 🎉 runs perfect Hugs Debra in Michigan

So my GF car needs plugs and coils so how many hours is this job allotted for in a shop?

CAN YOU RE-USE THE INTAKE MANIFOLD GASKET OR DO THEY HAVE TO BE REPLACED!

Ok. Don’t use high tech equipment like you did to read the tipm error code. Lmao.

Thank you for the exact description, I love my Fusion, but this is so arduous for the DIY type. Miss my 72 8 cylinder Skylark, But for todays technology, this is why a good mechanic is expensive a great one is priceless.

That's a $2200. There is no happy ending here.

This guy has no conclusion , , ,

I knew the front spark plugs were going to be easy. It's the rear that is going to be a pain in the ass. I am just surprised you can't just take the whole top off in one piece instead of several pieces. That would take some time off your hands.

Thank you for this video!!

EXCELLENT video, thanks so much for sharing, now I know what to look for on mine!

Why do they make it so expensive it should be like $75-150 because they all have this issue it’s bullshit

Fireri

It works, thank you!

I'd like to see how to program it

Nice

Nice 👍 t/u sir much appreciated

I’d like to see how to get the pass through for the PCM. I’m gonna use your information for the open ground check.this is very good information for me. Please sir if you would try to explain to me how/ why this would

Was it the ecm? Did it fix the job

Wats the cylinder firing order ?

Had the same issue. Replaced pcm with 2 used ones. At the dealer now. Both do not crank the engine after they got reprogrammed. Any ideas. Loosing faith in the dealer.

Good job my friend,I fix my car this weekend 👍👍👍

So whats the fix?

Take off the manifold for the spark plugs? Why?

Assuming this is oil sensor not the pump itself, we can drive safely to the workshop for replacement. Any way to determine 100% without specific equipment that this is sensor failure, not oil pump?

damn thats a sweet beard piece right there!!!! damn i am jealous!!!! JK....... great video guys !!!!

The thing is a piss poor design plug will get full of water, and the gears also once that happens the gears rust out and plug corrodes. I kept mine going for awhile cleaning it greasing it eventually it was limiting my new suspension so I put manual disconnects on it use that now.

Hello give m'y your number cool

Ki

Hello I like you give m'y your number coole watchap plise