We need a full hvac playlist like you did in plumbing
@user-pv2sg1oe1o8 күн бұрын
music is too loud
@JohnGodak11 күн бұрын
Thanks so much! Very helpful. I appreciate your efforts.
@Archim3118 күн бұрын
Thank you. Very good tutorial.
@hockeymoments958318 күн бұрын
I would like to get this family but I am required to have login credentials. Will you please advise how to get about this?
@terrellholt7729 күн бұрын
Awesome video!!!
@mep_guy26 күн бұрын
Thanks! It's definitely my favorite.
@JulianTheOwlАй бұрын
Ryan, Going through your plumbing 101 course on your site right now, and was wondering how you would size the water pipe for the lavatories given that it was assigning 15 GPM for the 1 fixture unit of a lavatory since the system type was set to predominantly flush valves. This video ostensibly answered that question, since after sizing for the water closets, you change the system type to predominantly flush valves before size the rest of the pipe. This method works for sizing the pipe, but thereafter you will not have an accurate GPM shown for your pipe, since the system type has to be set to either FV or FT. Without an accurate GPM, we don't get an accurate pressure loss calculation. Any thoughts on this?
@mep_guy26 күн бұрын
Are you talking about doing a pressure loss calc for the entire building?
@PriamPublicoАй бұрын
I followed the instructions but it did not work. Any tips on what I probably missed?
@mep_guyАй бұрын
There are a lot of things that could be going wrong. Making this work is one of the toughest things to do in Revit.
@eduardogonzales8895Ай бұрын
😬
@cm20506Ай бұрын
The critical path should take into account the pressure loss due to the "elevation difference". the pipes should have a new parameter indicating this pressure loss. Revit do not.
@mep_guyАй бұрын
When auto sizing you are assuming you have already have taken into account your head loss or pressure losses due to elevation. You size you piping based on velocity or friction loss. We still need to understand the fundamentals when using these tools inside Revit.
@cm20506Ай бұрын
@@mep_guy Shouldn't Revit take this "elevation" issue into calculation? Isn't this a deficiency?
@mep_guyАй бұрын
@@cm20506 Not for sizing piping. When you are determining if the building needs a booster pump that's when you would take into account the elevation. Once you determine the need for a booster pump or not you work backwards from the pressure you have left over. You still need to verify your pipe losses don't exceed the extra pressure you have. Refer to appendix E in the IPC for a complete explanation of sizing piping.
@cm20506Ай бұрын
How is the calculation made when the pressure of water entering the building is not known?
@mep_guyАй бұрын
Pipe calcs are based on flow rate. Flow rate is based on the GPM of the fixtures. Pressure has a negligible effect on the velocity of water through the fixtures so I can be ignored in the pipe size calcs. But it does matter it's just not how we size our piping. You could assume worse case the the pressure is 80 psi. GPM through all fixtures is a probability. We can't know the exact GPM at all times so we take a worst case based on the hunter curves.
@user-hq4md5yu7sАй бұрын
Oh! My god. I find out solution of mep revit. More easy & detail for beginners. You are a light against dark of mep drawings. I will love you better and better.
@JDanV-25Ай бұрын
Do you have template ?pls share
@mep_guyАй бұрын
You can get it at my website
@thakurdeepakaddy6318Ай бұрын
Nice
@trowawayacc2 ай бұрын
Ok so what happens down stream? If i have a very complex system where we have drain pipes merging into one another will this allow me to transfer the flow to the pipes downstream and size them accordingly?
@mep_guy2 ай бұрын
Yep they sure will!
@ajmalnattika90772 ай бұрын
How can i size the pipe with hot and cold and total (as per ipc standerd)
@mep_guy2 ай бұрын
I go over that in my course
@maheshch12 ай бұрын
Sir sometimes music is dominating your voice
@owusuosaejacob7202 ай бұрын
I have learned so much from you. I like your style.
@suchigwp2 ай бұрын
The background sound is very disturbing.
@nadeemasif24062 ай бұрын
Sir Please provide Revit MEP instalation file link, so i can easily download and install without stuident version.
@mep_guy21 күн бұрын
Just go to the Autodesk website to purchase a license.
@dongpa82712 ай бұрын
what is difference betwnn build and path???
@BurRun-kt3tf3 ай бұрын
Thanks អរគុណ❤
@HawkGTboy3 ай бұрын
It’s better to create a plumbing fixture family that consists of nothing but pipe connectors hosted to thin disc shapes in the family. Position those behind the arch fixtures and let the architect’s model show the fixture itself. That way if they shift the fixture in their model your plumbing plan doesn’t have two fixtures shown (yours and theirs.)
@mep_guy3 ай бұрын
My plumbing fixtures do have the ability to be turned off. The nice thing about having the fixtures is you can shown them on risers diagrams. To do this there is a little trick I use that I show in my paid courses.
@Curtis_Brusque3 ай бұрын
I'm trying to teach myself Revit for plumbing, and It would be nice if you could show tutorials like this using the out-of-the-box parts rather than heavily customized parts noobs like me don't have available.
@mep_guy3 ай бұрын
Check out my basic plumbing design video.
@mep_guy3 ай бұрын
Sorry it's called beginner Plumbing Design.
@emadnadi1524 ай бұрын
Nice .How about the drains ?
@mep_guy3 ай бұрын
Drains? What are those? Lol
@juandelafuente28534 ай бұрын
Excellent tutorial Mep Guy!
@mep_guy4 ай бұрын
Thanks so much 😊
@akhtarreyaz3764 ай бұрын
Great work bro
@mep_guy4 ай бұрын
Thanks!
@nicolasmatar-ir7ls4 ай бұрын
Hello Rayan i tried looking for your email on your website but coudn't find any ,can you provide me with your email so that i can send you some questions i am intrested in buying your course
@mep_guy4 ай бұрын
It's Theguy @ MEPguy dot com
@bepunisher14 ай бұрын
beatifull
@mep_guy3 ай бұрын
Thanks!
@sashidhar30254 ай бұрын
hello sir can u give information of sewer treatment plant it will be very helpful for us in plumbing
@mep_guy3 ай бұрын
I'll look into it
@ShaikmohammedMustafa-uk2bc5 ай бұрын
20:47 21:25 🙆♂🤦♂
@ShaikmohammedMustafa-uk2bc5 ай бұрын
9:05 czy..👍
@JBSale295 ай бұрын
Thanks a lot mate.
@user-vn4tp8cm2d5 ай бұрын
Hi Ryan. I couldn't find the free pipe fittings template. Do you still have it available?
@mep_guy5 ай бұрын
I decided to make it $20. I hope that's not a deal breaker. I added more stuff to it.
@jukboinedz11715 ай бұрын
disappointed, i purchased the template but no plumbing fixtures family loaded.
@mep_guy5 ай бұрын
There is a separate Revit Model that includes all the families. Please reach out to my email if you have any issues
@mep_guy5 ай бұрын
Download this template file for FREE at: www.mepguy.com
@andrewlorick1665 ай бұрын
the problem I have is that anytime i switch an elbow to the p-trap, the symbol no longer shows up
@TheCoffeeAddict-mw8ho5 ай бұрын
I have tried both the "dummy" method and the schedule method. I honestly prefer the "dummy" method because of spell check. And it's just simpler--Why complicate something when you don't need to? I recommend adding your notes to a Drafting View, though. That way you can copy them to a master library and just insert from file. Or use a legend view if it's general notes that you need to use on several sheets. Also SHIFT+ENTER at the end of the row will get you the empty row in a bulleted list, so you don't have to backspace. Keystrokes count.
@mep_guy5 ай бұрын
Thanks so much for this tip! I had no idea! I agree the dummy method is so much easier. For 1/ 2 story projects id prefer this method. If you have more floors then I think a smart note system starts to make some sense. It is hard to manage though.
@ElectricRob5 ай бұрын
Nice beginner overview! I especially like how you at first showed the box without any reference planes nor parameters inside a model to emphasize how "dumb" the box really is without all of the constraints - nice to see that perspective.
@mep_guy5 ай бұрын
Thanks Rob!
@Ac_theisland_5 ай бұрын
Would someone who wants to learn Revit need any prerequisite knowledge before taking your plumbing course?
@mep_guy5 ай бұрын
Not my plumbing 101 course. I start from the very beginning
@deyaa79165 ай бұрын
Great
@mep_guy5 ай бұрын
Thanks!
@randylltarlly70215 ай бұрын
Hi, are your templates also applicable for metric system modelling?
@mep_guy5 ай бұрын
Not at the moment. I hope to offer metric in the future.
@randylltarlly70215 ай бұрын
@@mep_guy no problem,
@user-hd3df2wd2q5 ай бұрын
can you share the architectural floor plan?
@mep_guy5 ай бұрын
You can get the floorplan / architectural model with the purchase of my Plumbing 201 course.
@abdelrahman53266 ай бұрын
Respect!
@mep_guy5 ай бұрын
Thanks!
@divyeshpatel56526 ай бұрын
Is there a way to connect two pipes at different elevations but from the main run going to the branch which is at higher elevation with a wye that is vertical and then go straight up perpendicular on the same plane as main branch and then put a 90 elbow to connect to the higher branch
@mep_guy5 ай бұрын
Check out this video: kzbin.info/www/bejne/q4jbpKSJfdqdhcksi=d1XCNgZpueJYwU6f
@ningzhou83976 ай бұрын
if i recalled correctly when watching your videos, you did use both horizontal and vertical connectors in some cases for easy modeling, sanitary perhaps? if that's true then it will be great if you can create short video for this case, and its effect on calculation?
@AKTad6 ай бұрын
Are you going to do more HVAC anytime soon?
@mep_guy6 ай бұрын
I will definitely do some more in the future. I have an entire course on my website.
@angelapepito71336 ай бұрын
Hello, the fixtures I have imported in my project do not have the option to create pipe like your video in 2:56. Is there a way to set this up or do I have to import a more friendly fixture? Where can I download the libraries you used?
@mep_guy6 ай бұрын
Go to my website MEPguy com
@thomasyepes79466 ай бұрын
I could fine the trap in your website D: I think isn't available at the moment.