Hey BD! One of the recent updates from Spektrum made this video obsolete. Menu selections have changed.

What's best cg

Great review. I’ve got one,still in its box. Thanks for the information on flap settings and elevator mix - especially on full / landing flap.😊

Спасибо, помогло 👍

TOP! thanks for teaching ! I needed this bad to run a VIFLY buzzer on a 3pos.

Hello BDT, I have an unrelated question for you. My DSX transmitter is stuck in safe mode. Is there a way to reprogram it? Thank you, Anthony

Thank you so much BD, you're awesome! I really appreciate your videos and I've learned tons. I've got an RC boat that I'm making that I'd love to talk with you about. Is there a way to contact you? There's a 3 minute video on my channel called "LŪN Introduction" that describes the project that the boat is for, and a number of other videos about the RC boat. Thanks again. - Roko

Here's a suggestion for a video to create custom sounds I found that with an app called WaveEditor on your phone I could record, edit, and export a working WAV file for EdgeTX to create a custom sound in my own voice. I bought the paid version for 4D and use these settings for the "Track" export: Format: .wav Encoding: 16-bit PCM Sample rate: 32,000 Channels: mono I then transferred the file to the sounds / en folder on the tx16s. The file name can only be six characters or less along with the .wav xxxxxx.wav

My receiver is powered up, and bound to my NX8+, but I can’t seem to find “forward programming” on the list.

Wow, this was very helpful. After starting out with JR and then using Spektrum for the last 15-20 years, this is a huge difference in how things get set up using different terminology and wording. I have to admit since the physical radio has so many similarities with the switches and buttons and scroll wheel, I thought there would be more similarities in the programming, but that was the totally wrong assumption. 😁🧐🛩️

How does the timer work as when on student the master timer isn’t counting down

these videos are gold

just ordered mine. thanks for the help

Is it important or recommended to to keep your radio updated?

Just got my new TX16S Max delivered today, followed your tutorial and now it's upgraded and ready to start learning everything else. This is by far the best series of videos for the TX16s I have come across. Thanks for your efforts in helping us all out. Larry

One question: is it the same if i connect the voltage wire at the xt90 battery connector in stead of the esc battery side?

I love your flying venue!

I've been using the NX8 for 3+ years now and my new tx16s max red will be here Tuesday. 😁 In this method you're teaching, what is the concept of the term source, and what's the difference between selecting min or max? Thanks, Larry

Should I spend the extra cash for a IX14SE over the regular IX14. Can’t decide.

You’re an absolute life saver and have kept me from frying my last few brain cells 😂 THANK YOU for all these awesome videos!

Your videos have been a great source help. Thanks

This is a really good tutorial, but it doesn't make sense, or I didn't understand why you use channel 3 for this setup when the throttle is actually on Channel One. Can you shed some further light on that? Thanks

Where do you order radiomaster from? Shipping on orders directly from radiomaster is very high. I'm in Utah. Edit: with a little more research I found that heli direct had the tx16s max 4 in 1, 5000 milliamp battery and red switch caps, all for the same price. They didn't have the other accessories you mentioned in a previous video, but at least shipping was free. I'm going to assume that it will get here much faster too.

Thank you BD…appreciate your review and “watch out” comments

Just getting started with your TX16S tutorials. I've been using the radio for a couple years but your videos are still first rate. The same went with the Spektrum NX series radios. Those were a big help back in the day.

Is it possible to import a spectrum nspm model file to the tx16s?

I looked into it and you can do wireless trainer with... I think any protocol that has sbus receivers (including elrs) with the tx16s, pretty cool! kzbin.infoes8MY549_hY Note that elrs can do sbus without a custom firmware now It requires opening up and wiring/soldering an elrs (or other) receiver into your tx16s but it might be worth it actually you could just make a plug into the bottom and have it dangle out

I recently purchased the Super Viper 105mm EDF and can't seem to figure out how to get the ESC working with the MFC-2085. I have the AR10360T+ receiver running on SRXL2. All of the control surfaces have been configured and work as expected. When I connect the ESC, it does the three beeps, then two beeps, it will then beep continuously after three to five seconds. By the tones, it sounds like the ESC is ready for calibration. Please note that I have tried turning on my ix20 and moving the throttle to 100% with throttle cut disarmed. After the two beeps, I moved the throttle to -100 with no further response from the ESC. Have you seen this behavior, and can you share any pointer to resolve it? Throttle is on channel 1 and Throttle Cut is on channel 8 (switch H -> Aux8 -> channel 8). Curious to know if you had issues with the throttle? I also tried the PWM but got the same results.

Good stuff BD. Thanks.

When upgrading the SD card to a faster card, do you just replace the card or do you have to copy everything from the original to the new? Might be a good option for another video.

So, if you are flying aircraft (line of sight) with Spektrum, Lemon, Flysy, or other popular receivers then 4-in-1 is the way to go, I think that is what you are saying. For FPV flying (drones) go ELRS for the greater range. Is this a shorthand way of thinking about what you are saying? Great video.

Excellent review. Well done and great information. Keep them coming!

Excellent review! thank you show much for these videos. I am learning and loving my TX16S MKII so far. I want to understand more about Inputs/mixes and outputs. I there a good group I can join or just suggest topics here and ask questions. I was able to create models, custom the screen and bind to a couple planes using your videos so thanks again. Keep them coming!

My Jumper T15 ELRS puts out 1000mw

Loving the RadioMaster content

My NX8 connectts but will not let me scroll to check for updates? What could cause this?

Hello BD, Could you show how the TX16s Max balances on the two different neck strap holes in an upcoming video with the 5,000 milliamp pack? I prefer the transmitter to tip forward a little bit versus being bottom heavy. Also, do you stand your antenna up when flying or do you leave it laying down sideways. Thanks in advance. Larry

your videos have been very helpful. I have a new nx8+ after updating and watching your last video when I look at the monitor screen it doesn't match up to NX8+ to view new channels .. do you have a video on NX8+ ?

Hi BD, are you switching from Spektrum to Radiomaster!

It seems you have been embracing radiomaster over spektrum lately. They seem much more affordable for what you get. Would you recommend that a person moves on from his NX-8 to a radiomaster?

BD ...As usual, you really help us under understand so many things in R/C. Your time and effort putting this (and others) together is much appreciated here in NH. Keep up the great work, we are learning and improving thanks to you! Thank you (01-2025)

Thanks for sharing your knowledge. Very useful and great video. I don't understand why they don't put the various entries in alphabetical order, and on all the nenu. It would be easier to find the right entry. Greetings from Italy

Thanks for the video..! If this update will work on my NX8 too, I will change my mind and keep it, I was thinking of selling my NX8 because I was angry that the NX8+ has 20 channels "somehow now"..!

Dude. You’re awesome. Just received my Tx16s this week and your videos are a lifesaver

I have a TX16S on Edgetx. I have set my flaps up on switch B as above to go from 0% to 40% to 60%. When I move SB from SB down to SB middle the flaps jump from 60% to zero and then back to 40%. Going from 40% to 60% this doesn't happen. Any ideas pls?

Gret flying, and nice, beautiful scale flying. I'm curious as for visibility, do you think this "Ghost Grey" scheme is more visible, or easier to track in the sky than the CAM, or the SEA paint scheme?

Thanks ;)

Great tutorial, could you please consider doing a tutorial on how to setup gear door sequencer? Along the lines of, when you select gear down the gear door openes then 2 seconds later the gear comes down. Gear up makes gear go up then gear door closes. Thank you for you videos Best reagards Matt

Im getting a firmware update error when doing the mm-stm-serial upload? Any help would be appreciated

Very nice, and in this J-10 my mental cart. Question, might be strange comp, but would you say this J-10 handles as good or better than my beloved Freewing F-14 Tomcat 64mm? I realize is a little different in size, but the F-14 twin is pulling 120A.