Tap on it if it starts pull the fuse you will never have to worry about it again
@imfrmhouston85016 ай бұрын
Why is mine all plastic
@urighht6 ай бұрын
Have this problem. Car dash lights up showing the key light locks and unlocks. I notice that the push button and brake are illuminated but once i hit the brake and push the button they still stay on as if i had not done anything, shouldnt they go out? I will try what you did, however i went the junkyard, do you know if it has to be the same part number on the box that your replacing or it doesnt matter, i am assuming it does because i got a junkyard piece and still no luck but different part number same style box though or maybe it is faulty too!? Thanks man
@robertmcwhinney4596 Жыл бұрын
Dude! You were NO HELP AT ALL!🤬
@eddieg2251 Жыл бұрын
Well from my own experience and most everyone who commented... It may have been a user error
@michelrobi1288 Жыл бұрын
I can’t thank you enough for this video Eddie, it doesn’t matter to me if the steering locks anymore. I followed your instructions and my 370Z 2010 is back to life. Thanks man. 😊
@tom-ehill2713 Жыл бұрын
Ma had to ride in tow truck 80 miles with Altima. It cost &1,100 and a week wait. Wonder how we couldve ordered that part!!!
@jeremyallen3448 Жыл бұрын
Called today dec 20 2022. This part has not been recalled
@brookesmith9562 Жыл бұрын
Rip sorry didn't know you passed sorry
@brookesmith9562 Жыл бұрын
Explain
@tankopps2 жыл бұрын
What conditions does the car have to meet for the recall?
@willpage792 жыл бұрын
Can a steering lock still lock without the fuse because my car wont start all the dash are on but it wont crank or start fuse aint there but steering feels lock any suggestion?
@adeeelhussain34222 жыл бұрын
Nice
@syedjawadkarim50052 жыл бұрын
Do u need to reprogramme with a replacement part or replacing with used part?
@eddieg2251 Жыл бұрын
I ordered mine from that company.. I was able to put it right in.. Just as long as it's unlocked
@patrickbreese91333 жыл бұрын
If that part is replaced, does the replacement part have to be programmed? Some of the sales in Ebay show a Dorman part, with a remote programmer included
@figurante65413 жыл бұрын
I wanted to know that too.... Do you already know if it needs to be programmed?
@patrickbreese91333 жыл бұрын
@@figurante6541 Yes, they do..they will work veeery temporarily, when installed, but then they do lock up after a while..
@lifeasabrat97973 жыл бұрын
Hey I have a question what if I get the car on accessories mode pull the fuse and the engine start what do you think maybe the problem ??
@dashtyATG3 жыл бұрын
Hy dear you are really amazing. I've a quick question please a friend of mine have an issue as he think. He said hes car altima 2011 doesn't start with out putting hes key in to the slot. Do you have to put the key in every time and push the button? And last thing it says no key on the dashboard as soon as u put the key in to the slot vehicle start perfectly.
@Ahmad-Nader3 жыл бұрын
almost certainly, the battery is dead on the key fob. when you insert the fob in the slot, there's some sort of a coil that wirelessly reads the code form the fob and allows the engine to start; which explains why the car only starts when the fob is inserted in the slot. Just replace the battery on the fob, and that will most probably take care of your problem!
@dashtyATG3 жыл бұрын
@@Ahmad-Nader most definitely no because we have already did that. The car burned in the past so they managed to control it somehow. I guess something is damaged.
@ToxiccTwix3 жыл бұрын
Get new one in junk yard
@alikamal87904 жыл бұрын
Hi dude good explain and thanks for the information
@RealTimmyturner3 жыл бұрын
Is it really recalled?
@maryramos78844 жыл бұрын
Which fuse Do we pull?
@RealTimmyturner3 жыл бұрын
10a
@Breezy336bay8 ай бұрын
@@RealTimmyturner 10 a from what?
@alwice794 жыл бұрын
BY THE WAY for others. Tapping a small chisel on the edge broke those tamper screws loose and set them on the reinstall.
@brookesmith9562 Жыл бұрын
What??? Does that mine plz explain I'm doing this today help 2009 Nissan Altima
@brookesmith9562 Жыл бұрын
Help explain do I break the case how do I seal again
@brookesmith9562 Жыл бұрын
How do I seal
@alwice794 жыл бұрын
Thanks for the video Eddie G. My daughters car, pulled it, pinned it down, fixed permanent. no more hammer in glove box .LOL
@said-sv1qm4 жыл бұрын
For all who has the sme problem after you het under the wheel steering and the start engine Working just go to the main fuse box next to the engine and pull off the fuse of the lock steering and you will not have problem again
@StopPlanWitMe4 жыл бұрын
Explain please
@said-sv1qm4 жыл бұрын
@@StopPlanWitMe after the engine start again go to the fuse box and search for lock steering and remove it. It means lock steering will not lock again
@CCKH724 жыл бұрын
you mean. it does not need to pull the motor out or do anything on steering wheel lock anymore right ? just remove fuse only ??
@said-sv1qm4 жыл бұрын
@@CCKH72 Yes after your remove streeing lock fuse the steering lock will not lock again but to make every thing normal again you need to buy the a New steering lock device and put the fuse again.
@oscaroscar2356 Жыл бұрын
Thanks I will be trying this 👍👍
@anyfoolknowthat4 жыл бұрын
2009 Altima, same issue; called Nissan... and my VIN is not in the right range. But there clearly is a problem. Who cares which VIN it is?!?
@nissanneal4 жыл бұрын
You need better information. I work for Nissan. The part is NOT a recall. It is covered by a TSB. This means that it is only covered by Nissan for certain vin numbers. Do not assume yours is covered. Take your vehicle to Nissan to see if your vin number is covered.
@eddieg22514 жыл бұрын
Neal Feero I called Nissan... They told me the 2009 is covered? Mine was covered
@anyfoolknowthat4 жыл бұрын
Eddie G My 2009 isn’t covered
@jesustrevizo31484 жыл бұрын
I've got an 05 Altima, steering wheel locked and can't turn the key. I removed the dash panels and and don't see that steering lock. Is it located somewhere else on an 05??
@eddieg22514 жыл бұрын
I did end up receiving the new part from that company and as soon as I installed it the car started right up and haven’t had any problems since 🙌🏼
@DEZZYGamingTV4 жыл бұрын
Unplug the car battery?
@Aksar_shorts_video4 жыл бұрын
GARDEN STATE SMOKE not working I’m try
@eddieg2251 Жыл бұрын
@@Aksar_shorts_video Idk man… i didn’t put this video up to f*ck with people… I made it to help people… I’m no mechanic but i do know if you have the same make/model as me, the same issue, and follow the instructions like i have them.. i don’t see any reason why it wouldn’t work
@PrettyGurl123614 жыл бұрын
Not on my VIN number. Totally ridiculous and I have a Nissan Altima 2009. My husband did that by drilling down and place a nail to hold it.
@oscaroscar2356 Жыл бұрын
What do you mean by not on your vin?
@darkhunk25 жыл бұрын
Nice vid man...did u have the same issue again?
@eddieg22514 жыл бұрын
Jerome Evans I ordered that new part I talked about in the video.. It all made without the locking mechanism so no problems since