2009 Nissan Altima Steering wheel locked (Recall)

2009 Nissan Altima Steering wheels locked (Recall)

[@michelrobi1288]

I can’t thank you enough for this video Eddie, it doesn’t matter to me if the steering locks anymore. I followed your instructions and my 370Z 2010 is back to life. Thanks man. 😊

[@alwice79]

Thanks for the video Eddie G. My daughters car, pulled it, pinned it down, fixed permanent. no more hammer in glove box .LOL

[@eddieg2251]

I did end up receiving the new part from that company and as soon as I installed it the car started right up and haven’t had any problems since 🙌🏼

[@DEZZYGamingTV]

Unplug the car battery?

[@Aksar_shorts_video]

GARDEN STATE SMOKE not working I’m try

[@eddieg2251]

@@Aksar_shorts_video Idk man… i didn’t put this video up to f*ck with people… I made it to help people… I’m no mechanic but i do know if you have the same make/model as me, the same issue, and follow the instructions like i have them.. i don’t see any reason why it wouldn’t work

[@said-sv1qm]

For all who has the sme problem after you het under the wheel steering and the start engine Working just go to the main fuse box next to the engine and pull off the fuse of the lock steering and you will not have problem again

[@StopPlanWitMe]

Explain please

[@said-sv1qm]

@@StopPlanWitMe after the engine start again go to the fuse box and search for lock steering and remove it. It means lock steering will not lock again

[@CCKH72]

you mean. it does not need to pull the motor out or do anything on steering wheel lock anymore right ? just remove fuse only ??

[@said-sv1qm]

@@CCKH72 Yes after your remove streeing lock fuse the steering lock will not lock again but to make every thing normal again you need to buy the a New steering lock device and put the fuse again.

[@oscaroscar2356]

Thanks I will be trying this 👍👍

[@urighht]

Have this problem. Car dash lights up showing the key light locks and unlocks. I notice that the push button and brake are illuminated but once i hit the brake and push the button they still stay on as if i had not done anything, shouldnt they go out? I will try what you did, however i went the junkyard, do you know if it has to be the same part number on the box that your replacing or it doesnt matter, i am assuming it does because i got a junkyard piece and still no luck but different part number same style box though or maybe it is faulty too!? Thanks man

[@alwice79]

BY THE WAY for others. Tapping a small chisel on the edge broke those tamper screws loose and set them on the reinstall.

[@brookesmith9562]

What??? Does that mine plz explain I'm doing this today help 2009 Nissan Altima

[@brookesmith9562]

Help explain do I break the case how do I seal again

[@brookesmith9562]

How do I seal

[@KennyWright-bv7sr]

Tap on it if it starts pull the fuse you will never have to worry about it again

[@anyfoolknowthat]

2009 Altima, same issue; called Nissan... and my VIN is not in the right range. But there clearly is a problem. Who cares which VIN it is?!?

[@tom-ehill2713]

Ma had to ride in tow truck 80 miles with Altima. It cost &1,100 and a week wait. Wonder how we couldve ordered that part!!!

[@willpage79]

Can a steering lock still lock without the fuse because my car wont start all the dash are on but it wont crank or start fuse aint there but steering feels lock any suggestion?

[@tankopps]

What conditions does the car have to meet for the recall?

[@lifeasabrat9797]

Hey I have a question what if I get the car on accessories mode pull the fuse and the engine start what do you think maybe the problem ??

[@PrettyGurl12361]

Not on my VIN number. Totally ridiculous and I have a Nissan Altima 2009. My husband did that by drilling down and place a nail to hold it.

[@oscaroscar2356]

What do you mean by not on your vin?

[@adeeelhussain3422]

Nice

[@brookesmith9562]

Rip sorry didn't know you passed sorry

[@imfrmhouston8501]

Why is mine all plastic

[@maryramos7884]

Which fuse Do we pull?

[@RealTimmyturner]

10a

[@Breezy336bay]

​@@RealTimmyturner 10 a from what?

[@ToxiccTwix]

Get new one in junk yard

[@nissanneal]

You need better information. I work for Nissan. The part is NOT a recall. It is covered by a TSB. This means that it is only covered by Nissan for certain vin numbers. Do not assume yours is covered. Take your vehicle to Nissan to see if your vin number is covered.

[@eddieg2251]

Neal Feero I called Nissan... They told me the 2009 is covered? Mine was covered

[@anyfoolknowthat]

Eddie G My 2009 isn’t covered

[@jesustrevizo3148]

I've got an 05 Altima, steering wheel locked and can't turn the key. I removed the dash panels and and don't see that steering lock. Is it located somewhere else on an 05??

[@robertmcwhinney4596]

Dude! You were NO HELP AT ALL!🤬

[@eddieg2251]

Well from my own experience and most everyone who commented... It may have been a user error

[@alikamal8790]

Hi dude good explain and thanks for the information

[@RealTimmyturner]

Is it really recalled?

[@jeremyallen3448]

Called today dec 20 2022. This part has not been recalled

[@darkhunk2]

Nice vid man...did u have the same issue again?

[@eddieg2251]

Jerome Evans I ordered that new part I talked about in the video.. It all made without the locking mechanism so no problems since

[@brookesmith9562]

Explain

[@patrickbreese9133]

If that part is replaced, does the replacement part have to be programmed? Some of the sales in Ebay show a Dorman part, with a remote programmer included

[@figurante6541]

I wanted to know that too.... Do you already know if it needs to be programmed?

[@patrickbreese9133]

@@figurante6541 Yes, they do..they will work veeery temporarily, when installed, but then they do lock up after a while..

[@dashtyATG]

Hy dear you are really amazing. I've a quick question please a friend of mine have an issue as he think. He said hes car altima 2011 doesn't start with out putting hes key in to the slot. Do you have to put the key in every time and push the button? And last thing it says no key on the dashboard as soon as u put the key in to the slot vehicle start perfectly.

[@Ahmad-Nader]

almost certainly, the battery is dead on the key fob. when you insert the fob in the slot, there's some sort of a coil that wirelessly reads the code form the fob and allows the engine to start; which explains why the car only starts when the fob is inserted in the slot. Just replace the battery on the fob, and that will most probably take care of your problem!

[@dashtyATG]

@@Ahmad-Nader most definitely no because we have already did that. The car burned in the past so they managed to control it somehow. I guess something is damaged.

[@syedjawadkarim5005]

Do u need to reprogramme with a replacement part or replacing with used part?

[@eddieg2251]

I ordered mine from that company.. I was able to put it right in.. Just as long as it's unlocked