Could be. It never set the dash light for it. The transmission is actually being replaced now do to a slow loss of line pressure. I would imagine it let allot of material past it.
@alexandremaalouff2890Ай бұрын
Someone know how to do that on a 07 3 gen I'am gonna end crazy with those ding ding Thks in advance
@the_hat_on_the_cat48974 ай бұрын
Dude you are a life saver!!!!
@thedudeaaronfyi4 ай бұрын
lol. Glad it helped! Thanks for watching
@carlharris42656 ай бұрын
Just yanked the whole box out of my '02 Ram and everything seems fine. Truck starts and runs; and has lights and radio. I'm gonna try that. Edit: Never mind, this thing also, at least, controls the intermittent wipers.
@thejoshmoshow36867 ай бұрын
Looks great bruh! Fine work!
@thedudeaaronfyi7 ай бұрын
Thanks a bunch!
@oldschool96227 ай бұрын
Great video. Tips for backside, corners and other accessory attachment points very helpful. The use of a heat gun to help smooth out anomalies, critical. Something this size is always going to have some sort of anomaly while laying and finishing. I have same truck, same headliner issue, just trying to find the right fabric to use has been a problem. Glue bleed thru is my main worry.
@thedudeaaronfyi7 ай бұрын
Thanks for the comment! Just make sure you give the glue time to tack up so it doesn’t bleed through. If it’s still liquid looking don’t try it. Usually takes 10-15 minutes after spraying.
@oldschool96227 ай бұрын
So pretty much the same as contact cement...let it set then have at it. You didn't use the headliner material w/foam backing, is that stuff cheap in quality...I'm having a hard time deciding what to use. Don't want to do this again because of lousy material. Thanks@@thedudeaaronfyi
@thedudeaaronfyi7 ай бұрын
@@oldschool9622 no I’ve never used the foam. You can find foam backed material but the selection is pretty slim. My headliner from the video is still hangin strong and looks great.
@luigihurtado979510 ай бұрын
How much should I pay for that job? Just labor and adhesive, I supply the cloth. I just got a quote of $ 245. I thought it was a lot and was going to do it myself, but after watching your video, I rather just pay someone. Miami,FL
@thedudeaaronfyi10 ай бұрын
Ya that sounds like a great deal to me. So long as they know what they are doing. I usually charge 600 or more in. That’s allot of work
@1windozesuk10 ай бұрын
Very helpful, great video, ty
@leedsbutler3567 Жыл бұрын
You forgot to smashing it with a hammer and mailing it back to ram in pieces.
@KaisTheFireWarrior Жыл бұрын
Was this the stock filter?
@thedudeaaronfyi Жыл бұрын
I don’t believe so. I could be wrong but I didn’t see any factory markings on it
@KaisTheFireWarrior Жыл бұрын
It should show a mopar symbol on the grey side if so
@patakinorbert379 Жыл бұрын
My breaklight fuse keeps blowing as soon as i touch the break pedal, maybe this is the problem?
@thedudeaaronfyi Жыл бұрын
Sure. I’d check over it and if not you might have a short somewhere in the line. I’ve also had bad bulbs do this.
@ubaldo24v81 Жыл бұрын
Mine leaks all the oil from the filter? Any tips
@thedudeaaronfyi Жыл бұрын
Well it kinda sounds like you’ve got excessive blow by. I would vent the side port with a hose rather than a cap. The hose could just be open on the other end.
@armwrestlingcenter1730 Жыл бұрын
does it put the oil back into the engine automatically or do you have to drain it and pour it back in?
@thedudeaaronfyi Жыл бұрын
no, it doesn't have the ability to put oil back into the engine. It's usually filled with pretty nasty stuff that you don't want to put back into your engine. I drain mine every oil change. it's usually about half way full at that point.
@armwrestlingcenter1730 Жыл бұрын
@@thedudeaaronfyi ok, i just noticed it had a filter on it so i thought it would clean the oil aswell
@DK-vx5co Жыл бұрын
For removing the foam you might try a plastic detailing brush with stiff bristles (auto parts kind) and a vacuum running to remove & clean up as you go (& hearing protection). Minimize chemicals when you can. Try not to breath lots of dust & chemicals. Be gentle.
@aleksandryudin874 Жыл бұрын
Thank you good information
@thedudeaaronfyi Жыл бұрын
Thanks glad it helped
@bryantstewart7583 Жыл бұрын
Absolutely great video man. Thank you for the tips. I would love to know how large of a piece of material I need to do this on my mk4 GTI. I want to use a customer design but done know how large of a piece I need to order. It's not a pattern but a graphic so I cant order something too big.
@thedudeaaronfyi Жыл бұрын
Well the width is pretty standard, don’t quote me but I believe it’s 2 yards. Every vehicle I’ve ever done was fairly close side to side but I always order 4-6 yards so I can do visors and other panels etc. it also helps to go overboard incase you mess up. This stuff is usually very cheap so get plenty. But if your tight on money go with 3 yds of length. Should be more than enough
@georgecrawford3051 Жыл бұрын
Great, no sound and the camera is shaking all over!
@dixiemae50422 жыл бұрын
looks pretty good
@williamriedel16862 жыл бұрын
Well done, looks good. Very good video. Thanks
@tomfletcher1142 жыл бұрын
Thanks man! I will try this in my 1998 Dodge Ram 1500. I am wondering how you tracked this chime down? Did you just listen and locate it? Thanks again.
@Zxkyyy2 жыл бұрын
what solution do you recommend for if the loom side is also corroded?. Thanks
@hobsonbeeman75292 жыл бұрын
Great job. Was kind of wondering about the long drying time before working in the fabric? I am doing the same for my 97 extended cab. I intend to use 3M Super 77 spray adhesive. I wonder how many were jacked up at the factory and had to be reworked. The probably had a vendor supply them to the production line and just popped them into place. On my 97 I don't have the back doors and it was tight getting it out. Probably went through the rear window before it was installed to get ti in the cab at the factory ?
@thedudeaaronfyi2 жыл бұрын
I’m not sure. I’d see if you can pull the front down in front of the steering wheel and towards the footwell.
@IFeaReDx2 жыл бұрын
brake lights worked but i had a blown parking light fuse(23), basically my brake lights would only work w the light s off and all other lights(turn/reverse) on the rear worked. i cleaned up a bunch of wires in the loom/headlight casing and replaced fuses and bulbs/ new oem headlight switch. i notice if i unplug the ballast the fuse doesnt blow but now my brake lights dont work again, could this be do to the system being unbalanced, probably gonna go back to stock headlights. brake lights will not work/intermittent(all 3) if i use my headlights, did ur fix w the needlenose plier and cleaned it up but still same issue. idk what to do thanks!
@Zxkyyy2 жыл бұрын
i feel like i could be having the same issue here. Any updates bro?
@IFeaReDx2 жыл бұрын
@@Zxkyyy yeah my hids were installed bad into the main wiring harness, went back to stock headlights and cleaned up the wires, also new oem brake light switch
@Zxkyyy2 жыл бұрын
@@IFeaReDx how would you recommended dealing with the same problem in the video but the loom side has corrosion too.
@IFeaReDx2 жыл бұрын
@@Zxkyyy clean the loom sides corrosion.
@foxybrown22 жыл бұрын
i am trying to replace the original headlights back in and it looks like a mess trying to put the stock head lights ass back in😠
@mrbeau53872 жыл бұрын
I’m just trying to change one bulb man wtf
@murraydupley93302 жыл бұрын
mk 4 gti have 2 fuses for left and right parking light.
@johnlong3842 жыл бұрын
750 ml or ccm is 3/4th of a liter which has 1.000 ccm while the US gallon has 3.78 l or ~ 3,780 ccm, if I'm not mistaken.
@BlitzRacing-2 жыл бұрын
My tail lights went out and I test my harness with the tester some numbers didn’t read does that mean harness replaced. but everything works but the daylight ones
@thedudeaaronfyi2 жыл бұрын
Tough to say. Follow the electricity. You have voltage @ the fuse?
@williamharris6312 жыл бұрын
Does that control the door lock
@thedudeaaronfyi2 жыл бұрын
The circuit board handles anything security related if I remember correctly. Door locks, alarm, disable features, etc…
@alvaro933642 жыл бұрын
Please someone answer me. That thing is arcing. 3rd light which is the parking light. I can see visible electricity. The bulb stays on when loose but turns off when I tighten it.
@christiangraham9102 жыл бұрын
Did this help with lamp out chime as well?
@thedudeaaronfyi2 жыл бұрын
Yes it’s the only chime in the truck
@thedolphinDog2 жыл бұрын
I just went to auto apholster shop for $700 estimate for them to replace headliner 1998 ram . Not gonna happen. Found fabric on ebay this video save me $500...........
@thedudeaaronfyi2 жыл бұрын
Love it! Thanks for watching! Glad you did it yourself. What kinda fabric did you go with? How did it come out?
@thedolphinDog2 жыл бұрын
@@thedudeaaronfyi I have not done it yet. I got the $700 estimate yesterday. From your awesome video I learned that cardboard backing comes out. Just ordered headliner fabric off ebay $50 . Thank you again. I can use the $500 saved to feed hungry less fortunate people. Thanks again. Merry Christmas
@Reviewerguy12282 жыл бұрын
I removed my headliner and the foam but the fiberglass that is left is very flimsy and does not really hold shape well… any tips? Should I flex seal the back so it’ll be more rigid?
@hobsonbeeman75292 жыл бұрын
I just took mine out of my 1997 ext cab and cleaned all the old foam off of it. It is also super flimsy ??? not sure if i can cover that. The new material has about 1/8 fpam backing.
@williambedigan11902 жыл бұрын
I went to H/D and they said that they don’t carry that thread size. The container I bought has 7/8 bung/hole size with a tape.
@thedudeaaronfyi2 жыл бұрын
Hate to say it but you might have to order them off Amazon. I know they sell them there.
@williambedigan11902 жыл бұрын
Where did you get the fittings for the aluminum container?
@thedudeaaronfyi2 жыл бұрын
Home Depot. They are thread to barb fittings
@northerngunner27562 жыл бұрын
That looks amazing . Nice job!!
@thedudeaaronfyi2 жыл бұрын
Thanks a bunch! Hope the video was helpful.
@technoshaman0013 жыл бұрын
Very informative helpful video, thank you. I have a 99 dodge ram and I want to replace the headliner
@tianaross37303 жыл бұрын
I have a 98.. wonder if I can take this task on now something I wanna do in my dodge.. rlly needs it lol
@thedudeaaronfyi3 жыл бұрын
It’s not too bad. Maybe an hour to get it out. You’ll enjoy seeing your favorite fabric up there rather than the most boring basic fabrics that these come with. Let me know how it turns out!
@PMAC-dx2ts3 жыл бұрын
I wouldn't put the headlight lens face down on the ground but I'm sure it's fine. Maybe on a clean cloth or towel.
@PMAC-dx2ts3 жыл бұрын
I left out that it was a good video. Thanks!
@lejackson84413 жыл бұрын
Thought I was going to have to take Dramamine the camera was moving all over the place. Then he starts in the middle of of the removal. He should also take the sock out of his mouth or stop mumbling!
@thedudeaaronfyi3 жыл бұрын
You would think people like yourself would just find a better video… but your hurting inside and need to project it out. I understand. Either way I’m here for you bro. Happy to help.
@lucasnolte32583 жыл бұрын
Have a link to that camo fabric? I’d like to put that in my dodge
@thedudeaaronfyi3 жыл бұрын
No, sorry I don’t. I got it from a local craft store.
@bigbud73563 жыл бұрын
Does that controls wipers by any chance
@thedudeaaronfyi3 жыл бұрын
No I’m sorry it doesn’t
@vibrantflow.432hz3 жыл бұрын
The level of detail in your instructiòn ... superb
@thedudeaaronfyi3 жыл бұрын
Wow, thank you so much. I really appreciate that. Glad I could help.
@patrickokeeffe69983 жыл бұрын
Excellent, no end to the problems with VW.. thanks
@TbirdThunderHD3 жыл бұрын
Thank You! Those coat hanger's are a crazy attachment design. They are what brought me to your video. Thanks so much for taking the time to film and post this great video!
@jody78653 жыл бұрын
Trying to figure out what ran across the garage ceiling at about :38
@LauryDepp3 жыл бұрын
Thanks man. ❤️
@gverb12193 жыл бұрын
.....don't know how your project turned out.....fell asleep while you talked from the 8 minute mark to the 15 minute mark. 🙄🙄🙄
@Tavi2223 жыл бұрын
Hi ! Recently i changed the middle one bulb (side position) It was all fine util now (after 2 days) now only the reverse bulb works...what should I do ?...