Regen works issue was I didn’t auto learn. It’s a 8,000watr Qs 273 hub motor running 27,000watts. Grins tech is good and all for long range heat but short burst it can’t do anything more heat is generated than it can dissipate. Now you cruising at decent speed long term and heat is an issue yes this will make motor run cooler I have it in my motor but it can only do so much when I’m pushing 75+mph out of if.

cutting caffeine was one of the hardest and still is things iv done ill do a separate video on that next.

No no was completely unrelated.

Slowly getting there still no where near where I think I should be physically

working on week update just been dead tired. Recorded it today editing tomorrow. I cut caffeine out entirely and thats been messing with me plus changing work out to slower pace realized was doing push ups and crunches too fast for full benefit so slowing down for full range of motion benefits.

every key will be different best luck is to swap throttles with another key lock throttle there may be some pin differences but I can walk you through it or make video on it at some point.

@@player1unknown9 to be fair a walk through would be nice, considering i have no idea what wires i need to disconnect, is there a way to maybe just bypass the key system and just use the throttle with no key maybe

@@player1unknown9 Just as a way to maybe get it going now would me just crossing the wires for the lock make it start up?

@@not_so_native_native yes but you have to know which wires which off hand I do not remember I do have a diagram saved somewhere of the bike

@@not_so_native_native you can do that but then bike will always be one

Just glad I have it rebuilt better stronger and safer

its only pushing out max 1,500watts which is about 28mph maybe 32mph depending on motor gearing as it is plastic inside. Some people claim to get 35mph out of it how is beyond me.

Hey does your key have a key cut number? I'm trying to get a replacement key as my ebike was stolen 8 months ago the police recovered it today and I remembered i dont have they key due to it beimg robbed off me with the bike? If you dont have a key cut number could we maybe arrange for you to send me images of the key so i can have one cut? I am gonna try take the bike to see if they can cut one without the key but not holding any hope on that thanks in advance if you see this

Trying to give out good advice. So many mistakes from my past and I think or at least hope I’m not the only one making these mistakes. Probably will make this into a series and or life stories then main take away I got from it.

np I still need to do a break down on things i don't like on the bike.

only with new controller / battery / motor

Not much, just been slammed with work lol you?

@@player1unknown9 same man!

Hoping new tune is faster but we will find out after brake issue is resolved. Balancing act of not wheelie and pinning throttle enough. Plus with the take offs like that range goes from 40miles to lower but I still got to do a range test.

For sure, but my first microphone I literally thought helmet audio was just that bad so I was scared to buy any microphone. I was gonna buy a 99 one from same brand but they didn't ship to my address.

@@player1unknown9 i’ve just been testing out the DJI wireless mic 2 despite the price tag, it’s pretty incredible

I don’t follow.

Wat my face been out for a minute now. Mask thing was a headache lol plus hard to hear and it simplifies everything

Manual? I don’t have one downloaded

Once till they saw pedals then were really upset that it wasn't a unregistered motorcycle and couldn't give me a ticket.

lol fair

Still working on max speed and I can’t hide wires anymore than I did lol. Trying to get it to at least 90mph

Wat

I used 10mm foam strips on both sides I need to do 12mm on both sides

Bac 8000 I can’t stand in regards to what you got to do to set it up back door access and it’s still less phase and battery amps than the FarDriver I’m running. Idk if I answered question already KZbin says I haven’t

@@player1unknown9 ok this is where inexperience can let you down ,the battery and phase amps of a controllers is not the reason one is better than another ,thats silly and amps over all has far less to do with top speed than people think ,infact the higher speed you go the less current you want going in to counteract magnetic saturation ,whiuch can slow down rpms,

voltage is more important in reguards to rpms but there is still the number one thing that determines the theoretical top speed that a controller can rotate a particular motor,but i think its something you should look for first

one thing to note is ASI development of FOC control allows you to increase the motors maximum rpms by up to 200% and the sinosoidial waveform pattern is so far above what fardriver has done ,so is smoother,quieter, they also support lots of displays and can use both analogue and digital controls

myself i wont buy either of them though as there is some new controllers which leave all current ebike controllers in the dust but they are my trade secret for now

these are the same type of motors they use in the new electric hyper cars

110mph will require your motor to be hitting at least 25 to 30 kilowatts

we design these type of custom bikes with full liquid and immersion cooling systems so have tiny bit of experience in these areas

For this set up and frame specifically. Otherwise I would of just bought a motorcycle frame set up max voltage max amps and the biggest qs motor but I use this as a daily so for 72volt stealth bomber with 150mm drop out prob will be the fastest assuming I don’t burn my phase wire up qs273 8,000watt v3 pushing 20,000watts atm through it but temps of wire worry me

Yes I build these. Idk your goal or what your trying to build more info and I could help.

@player1unknown9 I want something like a surron just with pedals due to legal reasons lol 30+ mph is ideal. I don't need to hit 60 I'd be more then happy with 45mph. Idc how much I gotta spend to get parts I just don't know good brands and what works together or to much about voltage and what not

@@TheElectricutioner surrons dated and too expensive. Better off building if you want performance if you just want out of the box talaria xxx which has pedal kits now.

@player1unknown9 I didn't know they dropped the pedal kit yet. I'm pretty new to the e bike and e scooter scene. I have a scooter that hits 45 to 50mph and it's scary with them 10 inch tires my dude lol that's why I wanna look into building a decent e bike that got the surron body style but still has pedals. I've been looking at the freego X2 on Amazon and keep considering picking one uo when they drop it on the 29th. But I also really wanna build one for the simple fact if anything goes wrong I know how to take it apart and mess with it. I feel some type of way about dropping over 2k to try and fix it and just break it more😂

@player1unknown9 I pretty much want a stealth bomber exactly like yours. I just don't know where exactly to start. I need to go back and rewatch a few of your videos and actually write down the parts or find someone that can build me one and would be willing to work on it if it breaks. Obviously I'd be paying for the build, parts and any maintenance lol

What do you mean like the display I’m using? Dkd

No problem. More I learn on a bike I own or product I own then I make the videos

3288

No idea what your talking about.

Wat I have no pie

I am speed / green streak / arrow / flash lol many names when I ride

@@player1unknown9 you're amazing you were able to build this. I'm looking forward to seeing everything come to a successful end

7k

Sadly not accurate speed though now fixed still need to do full pin throttle ride.

Nice only thing to worry about is tail light getting water / condensation and the kickstand snapping lol.

Says 30h when it terns off

Uh can you add me on discord and send me photos and or what is your power limit of battery sounds like your bms is tripping

@@player1unknown9 is your username the same as ur account I had a problem trying to join your server

@@cainmiller4780 what is the error

It can't talk to the screen u gotta plung up the screen