Parkside LED flashlights
6:10
Жыл бұрын
Best cheap PWM solar regulator
6:19
Victron energy happy package
4:45
2 жыл бұрын
Poor and correct wire connections
10:22
DIY Solar power - Sheep farm
5:21
2 жыл бұрын
DIY Solar control box for tree house
24:32
DIY Battery spot welding machine
25:31
Пікірлер
@Supanova70
@Supanova70 2 күн бұрын
Questtion on this MPPT controller. I hae 2 house to start batteries on my boat. Got to the boat and app said they were floating. Showed 20v from 2 100 watt panels 0 amps. When my boat is running my battery monitor shows -1.59 amp draw? Why? The voltage is 14.8 from motors. Shunt is installed correct to a neg bus bar. All house loads are off during readings. This also has a ACR
@electro_solar
@electro_solar 2 күн бұрын
Something is taking 1.59 amps for sure. U use victron smart shunt? U can alsoo contact me trough email, find it here on my chanel. I can try to help you.
@arminmohammadi1
@arminmohammadi1 12 күн бұрын
Can i connect car battery to landstar ?!
@electro_solar
@electro_solar 12 күн бұрын
Yes u can, its lead acid battery
@arminmohammadi1
@arminmohammadi1 12 күн бұрын
@@electro_solar Which charging mode should I choose ? Sealed ?!
@arminmohammadi1
@arminmohammadi1 11 күн бұрын
@@electro_solar ?
@electro_solar
@electro_solar 11 күн бұрын
@@arminmohammadi1 Yes, it will work, but that battery is not made for solar. Best way is lifepo4 battery.
@stevezb
@stevezb Ай бұрын
What’s the music? I don’t understand what you are saying
@littleowltelevision1418
@littleowltelevision1418 2 ай бұрын
Absolutely terrible , music totally annoying!!!!!
@electro_solar
@electro_solar 2 ай бұрын
I was new to yt, no experience. Thanks for comment.
@sylver989
@sylver989 2 ай бұрын
Great video.can you tell me if we charge in car of 12v,and by mestike we click and stop in 24v .does is have any protection?
@electro_solar
@electro_solar 2 ай бұрын
It has protection, if it detects a different voltage it will not start charging.
@arshal5106
@arshal5106 3 ай бұрын
I am here to watch your video on specific item and there was your background music. I am not interested your junk music. Please show and explain about the item only.
@electro_solar
@electro_solar 3 ай бұрын
Thanks for the comment, there is no need to spread hatred, you could have said it differently. At that time just started with youtube, still learning, have a nice day.
@bc69006900
@bc69006900 3 ай бұрын
No music please and that was a lead battery you connected too
@electro_solar
@electro_solar 3 ай бұрын
Yeah just for testing. Now its mounted on river boat with lifepo4.
@johnmanatt5829
@johnmanatt5829 5 ай бұрын
I’m using the SmartSolar 100/20 Controller and a 200 w mono solar panel to charge 8 6volt deep gel cell batteries. When I connect all wires I get a yellow light instead of a blue light. Initially when I connect the the last wire it lights up blue until I tighten it in place and the light changes to yellow. What does yellow indicate and shouldn’t the light be blue for a regular charge?
@electro_solar
@electro_solar 4 ай бұрын
Hi sorry for my late replay. U can read here all what u need, it is very well explained. Green led - Float, Yellow led - Absorption and Blue led - Bulk. community.victronenergy.com/questions/63640/charging-bulk-absorption-and-float.html
@zeljkojelic4834
@zeljkojelic4834 5 ай бұрын
Da li prilikom punjenja akumulator mora biti odspojen s klema? Ili moze dok je na vozilu da se puni? U pitanju AGM akumulator
@electro_solar
@electro_solar 5 ай бұрын
Može se slobodno puniti dok je spojen na vozilu.
@zeljkojelic4834
@zeljkojelic4834 5 ай бұрын
@@electro_solar Koji rezim/mod preporucujete za dopunu akumulatora? Gledam u komentarima 2 ili 4
@electro_solar
@electro_solar 5 ай бұрын
Program 4 bi bio bolja opcija. Premda se ne moze pogrijesiti i sa 2.
@zeljkojelic4834
@zeljkojelic4834 5 ай бұрын
@@electro_solar Hvala puno, imate subscribe
@electro_solar
@electro_solar 5 ай бұрын
​@@zeljkojelic4834 Hvala :)
@vukasinveljkovic232
@vukasinveljkovic232 5 ай бұрын
Kako ti se pokazao pistolj vredili li imam jedan onaj veci ali mi je ovde neverovatno kako se brzo zagreje ?
@electro_solar
@electro_solar 5 ай бұрын
Odlican je i sve je super u vezi njega, vrijedi te novce, ali ako je za neke vece poslove nije definitivno. Koristim ga ako imam nešto malo za ljepiti, sitne popravke itd... Brzo se potrosi ona patrona i cesto se mora dodavati nova pa me to smeta.
@vukasinveljkovic232
@vukasinveljkovic232 5 ай бұрын
@@electro_solar ma da imma onaj veci njihov ali za mel poslovne me mrzi da ga vadim sad ga ima od 18.1. za 1300 i 150 din 20 patrona
@electro_solar
@electro_solar 5 ай бұрын
@@vukasinveljkovic232 Sve jasno
@hasbenhome
@hasbenhome 7 ай бұрын
Music sucks
@til91
@til91 7 ай бұрын
Pozdrav. Može li se puniti akumulator od motocikla 12v 3Ah?
@electro_solar
@electro_solar 7 ай бұрын
Pozz, naravno da moze
@til91
@til91 7 ай бұрын
Pitam jer se ne razumijem.U uputi se navodi da je program br 1 od 10Ah a moj akumulator na motoru je 3Ah?
@electro_solar
@electro_solar 7 ай бұрын
Program 1 je za 12 volti baterije sa maksimalnom strujom punjenja od 5A. I to je u redu za tu bateriju.
@til91
@til91 7 ай бұрын
@@electro_solar hvala još jedno pitanje .na kojem.progrsmu bih mogao ostaviti odrzavanje akumulatora preko zime?
@electro_solar
@electro_solar 7 ай бұрын
@@til91 Ako imam potrebu za takvim odrzavanjem onda akumulator stavim na normalno punjenje jednom mjesecno. Naravno gledam da akumulator nije vani na minusima.
@photog1529
@photog1529 7 ай бұрын
What size wire are you using at the Victron battery connections? I have the same controller, and when I used ferrules on 10AWG stranded wire the ferrules wouldn't fit into the Victron. In my opinion, the terminals on the Victron are pretty anemic.
@electro_solar
@electro_solar 7 ай бұрын
I use 10 awg. Terminals are great. Its rated for max 10 awg. Try to use rounded crimp tool for awg 10.
@davebruessow6842
@davebruessow6842 5 күн бұрын
10 gauge CCA will not fit without breaking strands (making it sloppy). If you use pure copper (THHN or PV wire) it will be smaller in diameter and you can even "tin" the ends with solder making an even stronger connection...
@Ratalala
@Ratalala 7 ай бұрын
I don’t understand why it always lasts @ 15 hours… does it discharge the battery before starting a charge cycle?
@electro_solar
@electro_solar 7 ай бұрын
Its only charging, depends on battery capacity.
@HansKeesom
@HansKeesom 9 ай бұрын
Yep this is the goto MPPT for me. It can do 12/24/48 volt batteries and is the largest that has it's own load port. Wicked. That it is Victron speaks for itself, no other brand in my systems ;-)
@electro_solar
@electro_solar 9 ай бұрын
Yeah, best for me
@aleksandarvujnovic411
@aleksandarvujnovic411 9 ай бұрын
Imam istu bateriju i SRNE 2440 mppt regulator kad dosegne 27.5 uđe u float voltage,dali je to ok i cijelu noć baterija bude na 26.7 bar tako veli na displeju
@electro_solar
@electro_solar 9 ай бұрын
Float mode služi kao zastita od prepunjavanja i takoder održava bateriju kad je puna. Tako da je to sasvim normalno.
@ZokiG
@ZokiG 10 ай бұрын
Pozdrav. Imam jedno pitanje. Sa elektronikom nisam baš na ti. Imam Allpowers SP033 200W prenosni solarni panel. Njegove specifikacije su: Open circuit voltage 22,2V, Short circuit current 12A, Power voltage 18V, Power curent 11A. Je li mi za punjenje 12V 100ah lifepo4 akumulatora treba ovaj 100/20A mptt kontroler ili mogu uzeti i njihov mptt 75/15A?
@electro_solar
@electro_solar 10 ай бұрын
Pozdrav, 75/15 regulator podrzava po njihovim specifikacijama panel do 220W tako da bez problema se moze spojiti taj panel na 75/15 blue solar ili smart solar.
@ZokiG
@ZokiG 10 ай бұрын
@@electro_solar hvala na odgovru. Planoram uzeti smart solar zbog mogućnosti spajanja preko BT
@electro_solar
@electro_solar 10 ай бұрын
Najbolji izbor za male sisteme. Nema na cemu.
@hammer9185
@hammer9185 10 ай бұрын
How did you make the tip to hold the melted solder wire? Did you treated it with some chemicals? When I use mine, it just melts and fall off like small balls and does not hold on the tip and I couldn't solder anything.
@electro_solar
@electro_solar 10 ай бұрын
Hi, u need to use high grade solder wire. You probably have a soldering wire that is not of good quality and has no flux in it. Try to use better soldering wire or flux soldering paste. Then you won't have any problems.
@TDDoooOOOooo
@TDDoooOOOooo 2 ай бұрын
Use soldering resin / paste and if your tip is black ( oxidized) you need to clean it with water soaked soldering sponge and if that doesn't help then with fine copper mesh. If you can't find copper mesh, use 00 fine steel wool and be gentle when cleaning so you don't remove coating that is on the tip. Every time I use any soldering iron I let it heat up and clean the tip on wet sponge and apply fresh solder. I use resin core solder so it cleans itself from tiny layer of oxides.
@hammer9185
@hammer9185 2 ай бұрын
@@electro_solar Hi, thanks for the pieces of advice. I use solder wire Cynel, which is high quality solder wire. I assume that the problem is in the oxidation of the tip.
@hammer9185
@hammer9185 2 ай бұрын
@@TDDoooOOOooo When i clean it it is better but the tip somehow gets melted, i don't know what happens.
@electro_solar
@electro_solar 2 ай бұрын
@@hammer9185 I never had problems with melted tips.
@aegontargaryen7012
@aegontargaryen7012 11 ай бұрын
shitt af glue is 2 seconds and hard,stick only to half and not goin further..bullshit do not buy it
@bexraphaela
@bexraphaela Жыл бұрын
I really love this video, it show everything i need to know, thanks 🙏🏼
@electro_solar
@electro_solar Жыл бұрын
Thanks
@VictorVictor-hq7ui
@VictorVictor-hq7ui Жыл бұрын
No music please.
@arturalbertomartinho2103
@arturalbertomartinho2103 Жыл бұрын
very useful
@electro_solar
@electro_solar Жыл бұрын
Yeah, it is
@mlnxzy
@mlnxzy Жыл бұрын
The tin is so weak. It last two days for me. Don't waste your money better give it to red cross
@electro_solar
@electro_solar Жыл бұрын
For me its just fine, it depends for what are u using it.
@simnovv
@simnovv Жыл бұрын
in program 3 does it works all time with 10amps
@electro_solar
@electro_solar Жыл бұрын
It charges at the beginning up to 10A when the battery is empty, then it decreases as it gets closer to the end of charging, as with any battery.
@franjoorec6870
@franjoorec6870 Жыл бұрын
Poz.Mogu se puniti 12v /12ah baterije
@electro_solar
@electro_solar Жыл бұрын
Može naravno
@junior53329
@junior53329 Жыл бұрын
i just got one it wouldn't charge at all left plugged in for three days took it apart and tested everything with my meter plugged the little Borad back up inside of it now its charging we shall see how it works
@electro_solar
@electro_solar Жыл бұрын
Nice. Its great tool for some small and quick jobs.
@σπυρος1980
@σπυρος1980 Жыл бұрын
Hello i have the same solder and i have one proplem .press the on button and blings 6 time red ligh and not working
@electro_solar
@electro_solar Жыл бұрын
Sometimes u can buy faulty factory product from parkside.
@σπυρος1980
@σπυρος1980 Жыл бұрын
No its workin normal the first time i use this 5-6 time.but i cut plastic
@TIMALFA56
@TIMALFA56 Жыл бұрын
Ee to je too 😅
@godoit6027
@godoit6027 Жыл бұрын
Ja došah povodom i u svezi ostavljanja predmetnoga lajka 👍 ... 🍻😂🤓 Ej vidi i ja imam isti takav skalpel/nož za tepihe/kožu/kartone. 😎😀🤠🍻🍻😂😁💯🎉
@electro_solar
@electro_solar Жыл бұрын
Skalpel taj imam godinama, najkorisniji alat :)
@TIMALFA56
@TIMALFA56 Жыл бұрын
Najveca steta kod sve tri lampe je sta nisu punjive al sve drugo ok
@electro_solar
@electro_solar Жыл бұрын
Malo kvalitetnije igracke od ostalih, 4 EUR po komadu sa 3 god garancije :)
@TIMALFA56
@TIMALFA56 Жыл бұрын
Pa da to sve super samo eto steta sta nisu dodali opcuju da se mogu punit al sve u svemu lama je lampa bitno da svitli i da sluzi svojoj svrsi stq ce sigurno i sluzit
@electro_solar
@electro_solar Жыл бұрын
@@TIMALFA56 Lako se to prepravi da bude punjivo, mozda i snimim :D
@godoit6027
@godoit6027 Жыл бұрын
@@electro_solar staviš punjive baterije ... i "voala" 😂😂😂🍻🤠
@electro_solar
@electro_solar Жыл бұрын
​@@godoit6027 Ima i bolje rješenje heheh
@seidenrose99
@seidenrose99 Жыл бұрын
Ich habe das Gerät zwei Mal Neu bekommen, aber leider läuft nur das erste Programm. Beim Drücken von anderen Programmen läuft überhaupt nichts. Ist das normal oder wieder defekt. Was soll ich tun? Bitte um einen Rat und eine Antwort. Vielen herzlichen Dank im Voraus .
@electro_solar
@electro_solar Жыл бұрын
Grüße, ich benutze Google Translate, tut mir leid, wenn die Grammatik falsch ist. Wenn Sie das Ladegerät an die Batterie anschließen, haben Sie einige Sekunden Zeit, um das Ladeprogramm auszuwählen, wenn Sie es nicht ausgewählt haben, wählt sich das Ladegerät automatisch in Bezug auf die Batteriespannung aus. Nach diesen paar Sekunden können Sie nicht mehr wählen, Sie müssen das Ladegerät trennen und den Vorgang wiederholen, wenn Sie ein Ladeprogramm auswählen möchten. Ich hoffe, ich habe geholfen, Grüße
@stanwei157
@stanwei157 Жыл бұрын
music sucks
@robertbraham5487
@robertbraham5487 Жыл бұрын
Mppt 1oo 20 victron
@TIMALFA56
@TIMALFA56 Жыл бұрын
Jeli moze neki potrosac da svojim radom iscrpi bateriju vise nego sto je solar puni ili kontroler ima zastitu od toga ?
@electro_solar
@electro_solar Жыл бұрын
Kontroleri imaju tu vrstu zaštite ako se spoji preko njega kao u ovome slucaju.
@user-dj1xv7bz6v
@user-dj1xv7bz6v Жыл бұрын
Klass
@genmckoy
@genmckoy Жыл бұрын
Do you have link for the Epever brand?
@electro_solar
@electro_solar Жыл бұрын
Hi, sorry for my late replay. www.epever.com official site. I order it from Amazon. Here is better model with USB: www.amazon.de/-/en/EPEVER%C2%AE-Charge-Controller-Connection-LS1024EU/dp/B07BR34N9Q/ref=sr_1_14?crid=LJDTTN57BAXI&keywords=epever+10a&qid=1673372262&sprefix=epever+10a%2Caps%2C123&sr=8-14
@Sensin999
@Sensin999 Жыл бұрын
Did I saw it right? It should have 5Ah but it had only a little bit more than 2Ah while Charging?
@electro_solar
@electro_solar Жыл бұрын
That small battery you see is dead. Cant charge it. But charger can push up to 10A for healthy 12V battery.
@juanpabloolivachipolina
@juanpabloolivachipolina Жыл бұрын
Hello; I have an E-essential Flat 130 Watts Inovtech Monocrystalline solar panel, and a Power Battery 12v 130 ah slow discharge Battery Lead Calcium Technology. Can you please tell me which Victron regulator model would fit, for this setup. Thank you.
@electro_solar
@electro_solar Жыл бұрын
Hi, u can use SmartSolar MPPT 75/15 from Victron. www.victronenergy.com/solar-charge-controllers/smartsolar-mppt-75-10-75-15-100-15-100-20
@juanpabloolivachipolina
@juanpabloolivachipolina Жыл бұрын
Merci
@igorkvachun3572
@igorkvachun3572 Жыл бұрын
Yes👍 ⚡
@beaudinevanwky5479
@beaudinevanwky5479 Жыл бұрын
Iihuuuu7
@mjokser5365
@mjokser5365 Жыл бұрын
Fetish or preparation for blackout ? 😁
@electro_solar
@electro_solar Жыл бұрын
For everything hehe
@kvp5233
@kvp5233 Жыл бұрын
Добрый день Здравствуйте вы можете подсказать почему вот эти три лампочки моргают В чём причина спасибо если ответите
@electro_solar
@electro_solar Жыл бұрын
You can find error codes here on page 35 www.victronenergy.com/upload/documents/Manual_SmartSolar_MPPT_75-10_up_to_100-20/MPPT_solar_charger_manual-en.pdf
@electro_solar
@electro_solar Жыл бұрын
It can be: - charger temperature too high - charger over-current - charger or panel over-voltage - VE.Smart networking or BMS issue - internal error, calibration issue, settings data lost or current sensor issue
@kvp5233
@kvp5233 Жыл бұрын
Здравствуйте
@electro_solar
@electro_solar Жыл бұрын
Hello :D
@igorkvachun3572
@igorkvachun3572 Жыл бұрын
Yes sistema☀🔋 ⚡🔌💡👍
@igorkvachun3572
@igorkvachun3572 Жыл бұрын
Yes👍☀ ⚡🔌💡
@Workshop385
@Workshop385 Жыл бұрын
Prvi!
@electro_solar
@electro_solar Жыл бұрын
Mislis "first" ?? :P
@Workshop385
@Workshop385 Жыл бұрын
@@electro_solar ne, safety je first... ja sam prvi 😆
@TIMALFA56
@TIMALFA56 Жыл бұрын
Pa igleda nelosa stvarcica za manje poslove jer je prjenosna i ne zahtjeva direktni izvor napajanja vec ima svoj koji se puni
@TIMALFA56
@TIMALFA56 Жыл бұрын
Koja je cjena
@electro_solar
@electro_solar Жыл бұрын
@@TIMALFA56 Platio sam ju oko 8 eura na akciji kad su bile, trenutno sam u Njemackoj. Inace je cijena oko 18 eura.
@thanasistrigkakis5239
@thanasistrigkakis5239 Жыл бұрын
Will it work with 48w led lights?
@electro_solar
@electro_solar Жыл бұрын
If you use 4 led reflectors 4×48W=192W... 192W÷12V=16A... sure u can use it. But u need to put stronger fuse and thicker wires than I use in my video.
@zdravkojurina4545
@zdravkojurina4545 Жыл бұрын
Ako nećeš na Hrvatskom od opali jedan video na šveckom
@electro_solar
@electro_solar Жыл бұрын
Biti ce na Mandarinskom uskoro :)
@shawons0171
@shawons0171 Жыл бұрын
Hello sir, I sent you an Email about your KZbin channel did you get it?
@electro_solar
@electro_solar Жыл бұрын
Yeah. I will contact you soon.
@shawons0171
@shawons0171 Жыл бұрын
​@@electro_solar THANKS, I WILL WAIT FOR YOUR REPLY/////
@shawons0171
@shawons0171 Жыл бұрын
great