What are those metal hooks for that come with the set?

Too expensive... not going to spend $500.00 per side using Quick Covers plastic.

Thanks for sharing these helpful tips. I noticed that you shared some videos about outdoor power equipment repairing which contains lots of helpful information and I'm wondering whether you are up for a collaboration that can help more DIY repairers. I mean Hipa supplies parts for small engines and you get the knowledge of small engine repair and maybe we would work together to help more people in the community.

Is there any links for the steering assembly or a model number?

its still rusty and now un stable i would never

How can you update the system? Mines all glitchy

5:49 …. You can’t paint rust…

So you cover the rust .. eventually your floor falls out ..

How the heck to You add your runner boards to that???

A video on how to do it if you want to waste your time and end up with a visual bandaid over a real problem.

Thanks, budget and scratch-free from the tire shops!

What a foolish waste of money and time, and very Bad example to be putting out for ignorant people to follow.. Rocker panels are structural this is one reason inspecting stations will fail the vehicle for saftey reasons. So you actually are putting people in danger by posting this foolish information. Anyone watching this DO NOT DO THIS.

How does it work with your factory Bluetooth? Does it override it, or can you just still use the factory Bluetooth for phone calls and such

Wow no welding that just a band aid for now

The moon gear steering is terrible design 😢

Could you tell me what brand that radio is, or the link from where you bought it?

You just can’t see what the climate is set to which sucks but it is what it is

I think my manifold is leaking, except it makes the ticking the whole time doesnt sound quite as loud as that. You think it could be a manifold gasket

Holy rust bucket.. good on you for fixing it and learning but few things I'll point out that bugged me lol 144 point ratchet? 144 tooth you mean lol also I couldn't help but notice the giant cracks in the frame on the passenger side that would scare the fuck outta me alone! If you're able find another frame or have someone a welder fix those cracks before it becomes more unsafe to drive. Again good on your for attacking this job🤘

Wanted to say Thanks as well Kurt! Of all the videos covering this topic, yours gave me the courage to try to tackle this. The induction heater was absolutely essential, well worth the 200 bucks I paid for it. Too tight to get a torch in there for sure. Also, I was able to get the lower front stud (the super PITA one) cracked loose with a 1/2" drive breaker bar, U joint and 15mm deep socket from directly below in between the motor mount and the AC compressor. My F150 is 2WD though, looks like the 4WD would require dropping the front drive axle.

I have the la 115 and I only have to push the button in when the blades are engaged.

Dude, need some lighting to highlight what your trying to point out.

Same sound on my 2016. Stupid. My 20 years old subaru's are WAY easier to work on. Headlight bulbs/alternator, headers.. fuck you ford

What about the media and ok buttons not working. Just the top two buttons work

Ford Cancer that ford won't fix. I gonna fix my too

That is a horrible job. You just cover the rust shame on you.

On my LT1000 the steering gear configuration is different than shown. I can't find a video that shows my configuration. I'm not sure how to explain it.

I don’t have sound. Is there a specific hook up to speakers?

Could you help me😭🙏

Good product definitely saved money and time

You didn’t even show what wires . Show pictures or slowly show where

Make a cardboard pattern and it will come in handy later on, I know for a fact 😊😊😊

I just setup the same exact unit in my 2010 ford f-150, my audio from CarPlay lags a little bit, do you have this same problem? How do I fix it? Thank you.

Find? They just threw it away . 😂

what a nightmare working on this truck is lol

What head unit is this?

These rockers too far gone for proper repair anyway. Not sure how the frame is still black tho

codes also on the valve cover

Good job mha boy! You got a new subscriber 🎉

Where can I order them from? Thanks

Link?

Get rid of the "Install" part of your description, since you didn't do any installing. Worthless

Great job! Awesome vid, thanks for doing!

Do you know what would need replaced on the new steering unit if that is very sloppy and has a lot of play in the steering wheel? Similar to the old one when that rubber boot wears out?

Any chance you have a link to what baffles you used?

How does it sound

Which induction heater did you use?

I clicked on the video because I wanted to see if the abs rocker panels have improved in design and I can make 2 observations. 1) the design is not any different and they still suck in so many ways; the metal panels are far superior. 2) your install of the abs panels is the cleanest I’ve ever seen, the truck looks amazing and if I thought I could get abs panels to look this good I’d use them too. The use of fluid film is a great idea and I’ll be using it for when I fix my rockers. Great video, bro! Subbed

Nice job on it! Thanks for the video!

what kind of throttle cable is on this go kart mine broke I can’t find a replacement online