Nice work. Is there a Famicom version?

Question.. for expansion audio, you added the 1k resistor to one side of the 100k resistor and then added the 47k to the other side of the 100k resistor?

New project of sf1mini => kzbin.info/www/bejne/rJvYdoisgbVgg6s

@7:55 friendly reminder to not be an idiot like me and solder the DIN board upside-down.

love the channel. I would put Model 2 in your video title, since the job is very different from the Model 1. I know it's in the decription, but not easy to tell from the title.

I've finally got my ps2 fixed thank you so much bro

That mod is no doubt a must get. I installed this onto my Model 2 Sega MegaDrive. The colours looks phenomenal. The audio improvement blew me away and sounded absolutely incredible, Possibly way better than the Model 1 in my books. This mod was easy to follow. Good work on here with yours.

So FYI, the CFL back light that came originally is the power hungry culprit. I did a mod 12 years ago to mine that replaced the CFL with two LEDs flanking the OEM LCD with a straw bridging the two to diffuse light. I could get around 25+ hours on 6 AA batteries this way, still using the OEM LCD. Obviously this modern LCD is so much better. I may have to do this now. The picture is beautiful vs OEM.

Dad Jokes 😂😂

Is it just me or does she seem less than nostalgic for that film?

I appreciate your help Love from Saudi Arabia 👍👍👍👍👍

Hey man, thanks for the video. My browser and my ISP is reporting the links to the products as not safe, I would recommend changing them

Music too loud!

SEGA should make a limited amount of Neptunes. That would be so cool.

I already save the date this August

Nice

Wish some one could do this n glasgow

Is there a way for us to 3d print the piece you attached your SNES multi out to ? kzbin.info/www/bejne/a4Coo2luadSJg9Usi=v_NY974qY7-Z1xSu&t=1637 . That #NoCutMod piece is what I need for my Super Famicom Box

Ma man sounding like Jack Dawson lol

GIVE ME ONE

Супер жаль что Японцы так и не выпустили эту консоль, хотя могут хайпануть, на ретрогейминге.

maravilloso trabajo ,con todas las funciones incorporadas ,el mejor MOD que e visto nunca 👌

HEY LOOK ITS ME!!!

❤

Would you recommend this mod over the WiiHDMI from Arthrimus? I see that this one is smaller but the other one looks more solid for lack of a better word. Are there any benefits from one to the other? Any better sound or visual clarity on either?

Awesome video, as usual. Love watching your vids!

Hello, my friend! Do you happen to have an SF1 circuit board? I have a black screen and there is no image on my TV, thank you

Hello, my friend! Do you happen to have an SF1 circuit board? I have a black screen and there is no image on my TV, thank you

Watching from Philippines

PLEASE NOTE the instructions on the official site for install does not explain where the BLUE ceramic capacitor goes. This video shows you where to use it: Replace the brown capacitor located at C8 on the NES PCB with the included blue one.

I just removed my PPU using the guide on the Tim Worthington website (where I ordered mine). I used solder braid as recommended but the pressure combined with the heat while pressing on the solder holes (to wick the solder up) damaged some of the holes. Thus, I would HIGHLY recommend using a heatgun (which I had but did not use since the official method was solder braid). I mean the damage is minimal (only the holes attached to nothing fell out)... but still not as clean as the heatgun left this project. (I'm always leery to use heatgun in case I overheat the chip... but it seem unlikely and I need to get over this)

Which give better results The JR with the RGB mod or the snes normal with the rgb mod

Avec de l'iso cest impeccable !

Combien ya t' il de caps sur la LT ????

Ça permet aussi de bien nettoyé en dessous du port hucard la ou il ya beaucoup électrolyse des ancian capuchon, ca attack beaucoup la pcb !

might be a stupid question but do you use flux? i dont see any unless you tip it first

Dose anyone here know how i would go about fixing player 1 port every other port works fine

Kind of wish they had made a top loader board too.

Waiting for these to pop up on ali express.......

man, thanks for the video, Any chances that this mod works in a clone console? (the good ones)

I knew it has RGB! Cool.

Judging by the number of wires soldered inside for this “official” GG TV mod for developers, the console can output not only composite, but also RGB.

Soldering sequences was for some reason blacked. Why?

Thanks for the awesome video! I followed along and my mod was a success!

Adding in a nesrgb would make it more expensive indeed. But they could have added a few headers for it so the jumper wires would have been easier. Same thing with the power supply, change it to USB power. Many TV 's don't have RF anymore. So replacing the RF box with a simple composite out could be done. You don't need the nesrgb for that. The voltage mod for expansion audio could also have been integrated. Lots of small points to make it more compatible with the modern day. I do get that they start with recreating the original first, but a plus version would be nice.

35:00 It's a shame he did all that work but never had a controller to play his new Neptune with

I sent both my gamegears to a guy on eBay called “STEM gaming” I sent them Thursday morning Royal Mail 24. I’ve received both back thismorning with new shells, buttons, lens, lcd screens. Work flawless. I took them apart just to look at the work. Very clean and tidy. Couldn’t be happier. Both look amazing. Me and my son been playing on them all morning 🥳

will i be able to use my nacon daija ps5/ps4/pc fightstick with one of these?

Sometimes I order stuff from console5 just to get that cinnamon fireball candy they always include

Hmm... I just got done installing / recapping my 1VA6 Genesis and adding Zaxour's 3BP to it. Wondering if the stock case has enough clearance to piggyback a 32x in there.. Also since I'm using his Genesis 2 Din with the 3BP piggybacked on its possible to use the little DIN boards to piggyback on top the 3BP or it needs to passthrough the 32x. I'm not to privvy to how the 32x outputs things but a V1 Trojan 32x might be neat if doable.