Thanks mate!

Thanks!! ✌🏼

I already heard about the differences, but after I finished it. Very disappointing situation for me. But I have to handle with it now. Maybe I will fix the issues. Another said the seats are wrong. But in the kit these seats are included only. Thank you for all the information. I hope you enjoyed it though. Greetings from Germany 🤘🏼

@@myplasticprojects I enjoyed it very much. You have a rare talent that is positively highlighted in this beautiful model. I don't mean to give you a hard time for your effort. It is a beautiful piece of work. I've known about the mistakes Hobby Boss made on their model for awhile now though. Sometimes people have found and fixed them, and sometimes not. But the job you did on the model is awesome, and seeing it brings back some very good memories for me, and I'm sure for others as well. I look forward to seeing more of your work in the future.

Vielen Dank 💪🏼

The guy I built that model don’t want it so I didn’t add it. The models I build for myself will have them. But in Germany it isn’t allowed to show them. So in case I choose a thumbnail, I need to blur the swastikas or I need to choose an angle you‘ll not see it. It’s a forbidden symbol to show in public

Excuse me it’s too loud. The next one will be better! But nice to see you like the video!

Thanks man! Cause it’s too loud or do think there is no need for music generally? :)

That’s the way! The only way to achieve a smooth finish :) Thank you!

Muito obrigado meu amigo! Fico feliz em saber que você gostou e até aprendeu algo com ele! Muitas saudações da Alemanha 🤘🏼

Thanks :) Yeah of course. I’ll check the next video before I upload it. I still don’t know what the problem was with the output.

That is good info. Thanks. Twisting cables or wire runs would probably cause inductive interference and undue abrasion. Any other tips? I am building the Revell A-6E in Vietnam era livery. I plan on building a HobbyBoss A-6E for my sons father-n-law. He retired as an O-6 and was an A-6E B/N in the 1980s/90s and later a Sqdn Maintenance Officer.

Hey Joe! Thank you very much 👌🏼 I’m jealous you had a wonderful job! I hope you enjoyed it :). I appreciate your advice! It will help me to improve the next kit 🤘🏼 Happy modeling Joe!

@@ChrisNobodySpecial You are absolutely correct. Good info !

Thank you very much sir!! To be honest? I don’t know. That’s a decal. And some reference pictures showed this light in yellow too. So maybe it’s up to the aircraft and version? Anyway, thank you for the advice. I will try to figure put which is right :) I’m glad you enjoyed it and for your kind comment 🤘🏼

Definitely! Before I started the hobby I never heard about the HE 111 to be honest. But it is definitely a beauty! And yeah I’ve got this advice already and bought antenna lines from AK. I will use it for my C47 🤘🏼 Greetings from Germany 😁

It’s nice to hear this one seems like it’s bigger than it actually is. I hope, you enjoyed it 🤘🏼

Thank you so much! 🤘🏼🤘🏼

I’m glad you like it! THANK YOU 🤘🏼

благодаря ти много!!

That’s a really good question 🤔 I will take a look and let you know under this comment who is on KZbin 🤘🏼

Thank you very much sir! 🤘🏼

Algunas piezas de PE ya están presentes en el modelo, por ejemplo las escaleras. Los instrumentos de la cabina son de Eduard. Espero que esto te ayude 🤘🏼

@@myplasticprojects Voy a intentar hacer la maqueta me encanta como te quedó, a ver si por lo menos se parece. Si tengo alguna duda te comento. Gracias

No temas preguntar si necesitas ayuda o si el video genera alguna pregunta, estaré encantado de ayudarte. Si es necesario, escríbeme en Instagram.

Hey Franky! First, thank you that you like my work! Second, it is so annoying that I messed up with the loudness and some of you have problems with that! I apologize! Next time I need to check the volume before I make the video public. I hope you will take a look around for the next build 🤘🏼

Wow! I appreciate your comment my friend! I’m glad you like my work! Stay tuned for more 🤘🏼

You should give it a go. We all had to start somewhere. It is a very supportive community.

Thank you very much! I think it’s far better than reading the steps and things I did. So you can be more concentrated on the build 🤘🏼

Thank you very much Juan 🤘🏼 I will try to keep and improve this level of quality.

Thank you sir! 🤘🏼

Muito obrigado pelo comentário! :)

Thank you very much! That is a very helpful information! I will remember your advice for the next kit :)

Thanks! :) I’ll definitely do!

Thank you :) I’m glad you like it!

Thank you 🤘🏼

Thank you 🤘🏼

Very helpful information! Thank you! But it’s a little too late 🙃 hope you like it though 🤘🏼

What was the tape for on the leading edge? Was it to help with ice build-up? I was at El Toro MCAS in the 80s, right when they were bringing in the first F/A-18s. I remember as a 10 year old kid being at El Toro in 1968 when my brother was there after coming back from Vietnam. My little brother and I would sit next to the North side of the runway under a tree and a grassy area watch some of the flight ops. I remember the A-6s, A-4s and F-4s shooting approaches and full stops. To us little kids, we thought the A-6 was ugly with bulbous nose. Later on when I learned their all-weather capability, it became a favorite

@@ChrisNobodySpecial It keeps the paint from peeling off in the slipstream. Flying through rain without the tape would erode the paint off to bare aluminum and that's not good on a naval aircraft out in the salt air. I was at El Toro at the same time. You can guess where by my icon thingy! I got out just a month after the last F-4s flew off to the bone yard to be converted into target drones.

@@ChrisNobodySpecial I was stationed at MCAS El Toro in the 80's. The tape was to protect from rocks and other debrie from damaging the leading wing surface.

Oh you lucky you 😆 just take a look in my gallery 😁

Thank you very very much! 🤩 there is still much to improve but I’m happy with the result I could achieve with my current skills :)

🤣🤣 seems like a regular “I just want to buy one new paint bottle” Happy modeling for you too my friend 🤩

@@myplasticprojects Yeah thanks. I walk into a hobby store and then all of a sudden I come out with a few new bottles of paint and some other "important" materials😂

@FA-18Fguy And all these important tools will not be used for the next few years 🤣

Thank you sir! And yeah. When I was almost done I got this information but then it was too late to correct it 😩 I thought this is like the “service position”.

​@myplasticprojects Well, damn.....you may have to build two more then. One with folded wings with closed flaps/slats and one with them down and dirty. Let me know if that is the plan. I may be able to send you the two kits to build. 😉

Tell me more about that Idea on Instagram 😁

@@myplasticprojects I don't have Instagram.

How can we connect us?

Thanks! Let me know your thoughts on the full build video too :)

@@agora19671 thank you sir 🫡🤘🏼

Yeah I already know my failure about the Music! I’m sorry! 😞 Be sure the music in the next build is better mixed! :) And thank you for the positive feedback though :)

You‘re right! Thanks :) I will change the thumbnail. But sad, the intro isn’t changeable 😩

@@SunlightLee thanks for the info! Thumbnail is changed too 🤘🏼

@@nielsvc7525 I could swear there were more vids of it. So I’m more proud to be one of the few ones :) The Prowler has to wait. Got too many other projects :) but it could be a project in the future 🤘🏼

@myplasticprojects there are sort of a lot but low quality or not my kind of style vids. I like vids with good commentary and some music.

@@nielsvc7525 what a compliment! I hope you enjoyed it even the music was too loud 😩

@myplasticprojects even with the music on full blast, it was a joy to watch haha. I already saw a comment on the music, so I thought there no need to comment on the music again. Love you work and keep it up! 💪🏻🤙🏻

Never heard about that movie. Is the Intruder part of it?

Thank you 🤘🏼