I would really love to see these guys come out with a wheel or caster cradle for those of us who use office chairs with casters. If you use rudder pedals with an office chair, you very well know what I mean. It would be a great addition/upgrade to my wheel stand pro.
@romantyczny96193 күн бұрын
Mocowanie tych pedałów to jest jakis żart, do tego żeby wyregulowac trzeba znowu wszystko odkręcać. Po dokreceniu plaskownika stelaż stoi na płaskowniku a nie na stelazu 🤦
@wheelstandpro2 күн бұрын
Pedały po zamocowaniu za pomocą płaskownika oparte są na gumowych tulejach i po dokręceniu śruby nie mają prawa ruszyć się nigdzie, co z powodzeniem się udaje. To rozwiązanie zostało przetestowane podczas surowych testów trwania rozgrywki i sprawdza się bardzo dobrze. Diabeł tkwi w szczegółach. Jeśli jednak takie rozwiązanie Panu nie odpowiada wówczas sugerujemy zapoznanie się z nową blachą pod pedały od stojaka DD, który znajduje się tutaj: wheelstandpro.com/pl/produkt/wheel-stand-pro-dd-2/?region=poland
@xXCannYXx7 күн бұрын
hi can i use the stand as fo? so sidestick right side and throttle left ? is that possible
@wheelstandpro6 күн бұрын
Of course! Simply swap the plates to the desired side.
@EthanLessiter15 күн бұрын
Great! Does it work with the honeycomb rudder peddals?
@wheelstandpro13 күн бұрын
Yes, it works with the Charlie Rudders as well. Setup video: kzbin.info/www/bejne/h6mccqVjhLyNZ5Y
@ryanmann3412Ай бұрын
Forgot the longest step of all! ... removing all the plastic wrap! 😠😂
@ryanmann3412Ай бұрын
edit: also instructions are just not it, don't bother. videos are recommended with a lil figure it out on your own kinda. i have so many extra pieces...who knows which set it goes to 😂
@mtjkoo86842 ай бұрын
I bought T300RS with wheelstand pro back in 2020. Now my stock pedals are broken and looking for T3PM pedals for an upgrade. Does it fit the stand?
@wheelstandpro2 ай бұрын
Yes, they will. Please see here: kzbin.info/www/bejne/h3nSp4mOp5unqsUsi=oDGLRu-4lWt_m3h5&t=22
@mtjkoo86842 ай бұрын
@@wheelstandpro Thanks! 😊
@theruthlessmerk37152 ай бұрын
Can I get one of these made? I have this same exact steering wheel setup and I’m looking for a stand but I know this stand is old
@wheelstandpro2 ай бұрын
Hello, we still make it! Please see here: wheelstandpro.com/product/wheel-stand-pro-for-madcatz-wheels-x360-v2/?region=europe
@theruthlessmerk37152 ай бұрын
@@wheelstandpro it says error page
@theruthlessmerk37152 ай бұрын
@@wheelstandpro if I can purchase this exact same product I will but it doesn’t let me go on the link you sent
@wheelstandproАй бұрын
@@theruthlessmerk3715 please contact [email protected] We will figure out a way to help you.
@LiquidTurbo2 ай бұрын
This video is due for an update. It’s so bad.
@speedbrake223 ай бұрын
so are the yoke and throttle always angled slightly forward?
@ErrorNameNotFound3 ай бұрын
Where can I find the control panel shown in the video?
@wheelstandpro3 ай бұрын
Please contact Logitech/Saitek
@matevskij3 ай бұрын
Hey I am looking to order this, I just couldn't figure it out whether Turtle Beach Velocity One Rudder Pedals would be compatible with this one without requiring additional modifications, parts? Thank you
@wheelstandpro3 ай бұрын
No, they wouldn't however it is possible to get it. For more info please contact [email protected]
@Randomguy-v3l4 ай бұрын
Can i put the shifter in any side?
@wheelstandpro4 ай бұрын
Yes, you can mount it on either side.
@zeezeezapauka82624 ай бұрын
Thank you, very informative video!
@_huba20666 ай бұрын
hello, would this work with the moza r9 wheelbase?
@Michelsen3K6 ай бұрын
I love the wheelstand. Even the moza r12 (12nm torque) at max output is stable
@wheelstandpro6 ай бұрын
Can you please contact us at [email protected]? We have a few questions for you. Thanks!
@aritz30476 ай бұрын
Can I use T GT 2 with Wheelstand Deluxe v2?
@wheelstandpro6 ай бұрын
Yes
@PettyCR7 ай бұрын
Is there a way to extend the stand for the throttle even more to the right. For me it is a bit to close to the yoke, even with the pole fully extended.
@wheelstandpro6 ай бұрын
It is possible to extend it a little bit, like a few cm. In order to do so you need to unlock the quick release, move the side module to the right a little and tighten the quick release again to lock it.
That thing is gonna flex like crazy, you will definitely loose some ffb effects.
@wheelstandpro7 ай бұрын
To your surprise - it doesn't and making a comment based on none of the actual racing experience with the use of this stand is uncalled for.
@duck54046 ай бұрын
Thank you for that reply. Also do you have this wheel stand to fit the new Fanatec DD Extreme. It's the same wheel base just a little bit longer base front to back for that one top screw. This will be the 4th wheel stand that I will purchase for 4 different wheels. Thank you for your awesome products .
@wheelstandpro6 ай бұрын
@@duck5404 15nM of torque is way too much for a stand like this, sorry.
@Sp0rksta8 ай бұрын
quite late to the party but I found that instead of cutting the rubber foot off, if you warm it up with a hair dryer or hot air gun for a few minutes it'll just pull of without issue
@wheelstandpro8 ай бұрын
No need to do that. Please see the video: kzbin.info/www/bejne/rGqwaaiGnbOZmpY
@thawhigs8 ай бұрын
Mine never came with this plate how do I get one of those plates
@wheelstandpro8 ай бұрын
There are various models. Not all of them include this plate. You can get it here: wheelstandpro.com/product/gts-csl-plate-for-csl-elite-lc-pedals/?region=uk
@scottmattern4828 ай бұрын
Mine just arrived today. Thanks for the incredible solution for my HC flight sim setup. I'm very happy with the qualtiy and value.
@wheelstandpro8 ай бұрын
Happy to hear that! Enjoy!
@theclimatecraft74348 ай бұрын
Hi I‘ve bought a wheelstand pro deluxe v2 by second hand and don‘t have any screws. So my question is if the screw for the pedals is a M6 x40 too?
@wheelstandpro8 ай бұрын
There are two ways in which you can mount the T3PA pedals. 1) If you wish to mount the T3PA pedals with the brake mod which comes together with the pedals, then you would need to use an M5x60 Conical screw. Setup video: kzbin.info/www/bejne/gnqZi6Osdpual5o 2) If you wish to mount the T3PA pedals without the brake mod, then you need to use an M6x50 Allen Screw. Setup video: kzbin.info/www/bejne/eWbCYaqdo9aSps0
@kend54418 ай бұрын
I have Honeycomb Alpha and Bravo controls, but my rudder pedals are Logitech G Pro, not Saitek or Honeycomb. Will my pedals work on this wheel stand without modification to the stand or to the pedals?
@wheelstandpro8 ай бұрын
Logitech is the same as Saitek as they have bought their products/design.
@leonerx68 ай бұрын
I used it with my Thrustmaster T500 RS and now with my Fanatec CSL DD. It works flawlessly! No regrets about the purchase.
@bertrand16788 ай бұрын
It's a v2 Deluxe ?
@leonerx68 ай бұрын
@@bertrand1678 No the normal one. I had to order the compatible plate for the wheelbase and pedals for CSL DD. The screws and everything were included.
@bertrand16788 ай бұрын
@@leonerx6 i have the same and order the plate today for CSL fixing
@mangudai19879 ай бұрын
What chair are you using?
@wheelstandpro9 ай бұрын
Xrocker
@knedlik749 ай бұрын
hello witch stand is compateble with T150 with th8s schifter?
Dobrý den. Mohu se prosím zeptat jaké má mít označení stojan Wheelstand aby byl kompatibilní s T248? Český e-shop je amatér a tento volant v nabídkách nezmiňuje. Deluxe V2? Děkuji.
@wheelstandpro9 ай бұрын
It would be this model: wheelstandpro.com/product/wheel-stand-pro-for-thrustmaster-t500rs-deluxe-v2/?region=europe
@sgtslaughter49859 ай бұрын
Hello, your wheel stand pro product is very impressive. I love it. Bought it for what I thought was going to be my yoke and throttle combo for Logitech. Unfortunately, after reviewing the honeycomb you can throttle I need the wheel pro for that Yang throttle combo.are there modifications that convert my logitech wheels Pro to the honeycomb wheel stand Pro?
Can anyone tell me what the max hight adjustment is?
@wheelstandpro9 ай бұрын
There are basically two dimensions when folded: standard V2 models: w/l/h 35cm/55cm/8cm DELUXE V2 stands w/l/h 40cm/65cm/9cm +RGS module: w/l/h 63cm/65cm/9cm With wheels mounted only the height rises: 32-38 cm depending on the wheel. When unfolded and ready to play (at 90 degrees): 46cm MIN -> 68cm MAX
@farfarad899 ай бұрын
I have a T300rs GT Version with 3 Pedal. I´ve installed the Conical Modification for the Brake. And so the middle screw hole is blocked with the screw for the Conical Mod. How to install the "3-Pedal with Conical Mod" -Setup with this Wheelstand pro?
@wheelstandpro9 ай бұрын
There are two ways in which you can mount the T3PA pedals. 1) If you wish to mount the T3PA pedals with the brake mod which comes together with the pedals, then you would need to use an M5x60 Conical screw. Setup video: kzbin.info/www/bejne/gnqZi6Osdpual5o 2) If you wish to mount the T3PA pedals without the brake mod, then you need to use an M6x50 Allen Screw. Setup video: kzbin.info/www/bejne/eWbCYaqdo9aSps0
@farfarad899 ай бұрын
I have a T300rs GT Version with 3 Pedal. I´ve installed the Conical Modification for the Brake. And so the middle screw hole is blocked with the screw for the Conical Mod. How to install the "3-Pedal with Conical Mod" -Setup with this Wheelstand pro?
@farfarad899 ай бұрын
OK I found a way...there is a thin silver longer screw in the package ...with this screw it will function...
@wheelstandpro9 ай бұрын
There are two ways in which you can mount the T3PA pedals. 1) If you wish to mount the T3PA pedals with the brake mod which comes together with the pedals, then you would need to use an M5x60 Conical screw. Setup video: kzbin.info/www/bejne/gnqZi6Osdpual5o 2) If you wish to mount the T3PA pedals without the brake mod, then you need to use an M6x50 Allen Screw. Setup video: kzbin.info/www/bejne/eWbCYaqdo9aSps0@@farfarad89
@Deeplomat2710 ай бұрын
Great…got it for my t300 years ago and it was always perfect, especially for smaller apartments..actually i‘m happilie awaiting my new one for my gt dd pro
@sakis4-metaxa10 ай бұрын
Hello there im 1.86 tall and i m thinking if i will have problem with my legs whem im braking using heel toe??? I m about to order and i want to make a good choice for my logitech g29..thanks a lot..
@wheelstandpro9 ай бұрын
I am 183cm tall and have no issues with the heel toe technique. The pole does not get in the way that much :)
@sakis4-metaxa9 ай бұрын
@@wheelstandpro i bought it and its perfect thanks a lot!!
@wheelstandpro9 ай бұрын
Thank you and enjoy! @@sakis4-metaxa
@LeonardoLopes-v5v7 ай бұрын
So,there’s no problem with the knee beating the pole when you have to brake?
@wheelstandpro7 ай бұрын
Nope@@LeonardoLopes-v5v
@34dojazd10 ай бұрын
Hello, I have a question, is it possible to replace/buy the upper part on which the base is mounted in the basic version of the Wheel Stand Pro? I ordered CSL dd from Fanatec ake on my wheel stand (not v2) I don't have this single hole.
What size are the bolts? I picked up a used one with no bolts
@wheelstandpro10 ай бұрын
The ones to mount the steering wheel are 2 x M6x16 Allen
@pigeon3375isverycool10 ай бұрын
Does this work for Xbox series X?
@wheelstandpro10 ай бұрын
You would need to contact Saitek/Logitech about it as we do not make the Yoke or pedals, sorry.
@lukemchale-jones304110 ай бұрын
This looks about what I'm for, because I ideally want the throttle to my left and stick in the middle. I use a X52 HOTAS. To my eyes, it looks as though the base boards are big enough but that the screw holes arent in the correct positions. Other then that, is there any reason why I couldn't use this HOTAS with this setup?
@wheelstandpro10 ай бұрын
No, it is compatible with the X52 as well :)
@tre1six10 ай бұрын
Can barely follow what's going on with this sh💩t camera work
@some-replies11 ай бұрын
Wanted a video of someone just installing the stock clamp and you're the only one! Don't want to break it so figured I'd see how first
@stevedoyel11 ай бұрын
Does this work for the Hori Mario Kart steering wheel and pedals?
@pinecnp11 ай бұрын
Hello, can I use your stand with new Fanatec ClubSport DD+ that will be released this year with 15Nm power?
@wheelstandpro11 ай бұрын
Hello, can't answer this question until we get the wheel to test out, although I assume it would be too powerful for our stand. However, that is just a guess.
@Fernside53 ай бұрын
@@wheelstandproI’m looking at this option as well. Appreciate I would be turning power down to about 50% to begin with. By the way, my Wheelstandpro is one of the best and value for money deals I’ve ever bought. Originally for TM T300, currently with T-GT; added T-LCM pedals; Shifter add on and recently the adaptor to add the TSS handbrake. Just amazing. If I can put the DD+ etc on I will be delighted
@danielcarvalho121711 ай бұрын
Good evening, how are you? Could you tell me if this steering wheel works on the Xbox Series?
@wheelstandpro11 ай бұрын
Hello, you would need to contact the manufacturer of the wheelbase.
If you own the dual pedals, then you would need the TX/T300 stand: wheelstandpro.com/product/wheel-stand-pro-for-thrustmaster-t300rs-tx-t150-tmx/?region=europe If you have the 3 pedal version like T3PA, T3PM, T-LCM then go ahead with this one: wheelstandpro.com/product/wheel-stand-pro-for-thrustmaster-t500rs-deluxe-v2/?region=europe In both cases the T150 wheelbase is mounted using the original clamp it comes with.