Wheel Stand Pro GT2/GT3 stand: setup for the CSL Elite pedals and CSL Elite wheelbase

Wheel Stand Pro for CSL Elite setup video
Buy yours here:
1) Orange colour: www.wheelstandpro.com/products...
2) Black colour: www.wheelstandpro.com/products...
Wheel Stand Pro specializes in providing sim racing enthusiasts with high quality products to enhance their driving experience.
Wheel Stand Pro is all about quality, durability and stability. Our products are designed for indoor use, therefore their compactness is of major importance. The minimal design blends beautifully with any interior. It was invented in Europe and it was the first construction of this type in the world.

[@Deno-yz1be]

Great. Worked for me 👍👍👍 Used for the three base screws M6X20

[@davidtsmith33]

Hey thanks for this @wheelstandpro . I have a Wheel Stand Pro for the Logitech G29 I had bought for it some time ago. I'd recently bought a Fanatec CSL Elite (for PS4) and using the Wheel Stand Pro to mount it on. I ended up using the included Fanatec desk clamp to secure the wheel base and for the pedals base I ended up securing that with a plastic tie strip to the base poles as couldn't figure out how to do it with the WSPro's metal strip and screw. As it turns out the screw is not long enough for it. I'll have to get a longer screw, washer and nut. Anyway your vid gave me an insight as to how to do it and what I need to do now. Cheers.

[@wheelstandpro]

That's exactly what is needed to be done :)

[@Tyson9590]

How do you use the Desk clamp? I cant put the complete base on and secure it because the screw under the „Disk“ blocks it. (pls excuse my bad english)

[@wheelstandpro]

@@Tyson9590 You would need to ask the manufacturer of this part. We do not make it.

[@apolkxi]

Can I use the same mounting plates and screw that are used for my g29 paddle? is the screw length and diameter the same? (this looks longer to me)

[@davidtsmith33]

Thank you for this helpful tutorial. I have the Wheel Stand Pro Deluxe that I bought years ago for the Logitec G29. About a year or so ago I bought a Fanatec CSL Elite which i used the same (Deluxe for G29) stand for. Since the bolt was too short I couldn't secure the pedals to the stand with the brace so I used a tie strip. Well from your advice to a comment regarding the length needed (M6x80) I went out and got one today and was able to secure. Soo bye bye tie strip. For the wheel base/steering currently I use the table clamp for the Wheel Stand Pro Deluxe. So next project is to drill the three holes needed to secure the wheel better. Thanks again.

[@wheelstandpro]

We already have a wheel plate compatible with the CSL Elite. It is available to purchase separately and included with the GT2 and GT3 stands in our offer.

[@davidtsmith33]

@@wheelstandpro Really? I went to look for the compatible plate for CSL Elite on the site and couldn't find it. Can you post a URL to direct me where the plate would be for purchase? EDIT: Looking for a plate to mount the CSL Elite wheel base in order to hard mount.

[@wheelstandpro]

@@davidtsmith33 www.wheelstandpro.com/products/wheel-stand-pro/gts-plate-upgrade-for-t3pa-pro-and-t500rs?region=1

[@davidtsmith33]

@@wheelstandpro Thanks but looking for the plate attachment to hard mount the CSL Elite wheel base. I'd already taken care of the pedals mount.

[@KillKRT]

So, you mean that in order to mount the CSL Elite (I have also the LC kit) on the Wheel Stand Pro Deluxe V2 I just need a M6x80 (with its nut and washer of course)? That would be a great news!

[@Psycharly]

Great job, thanks a lot!!!

[@mikaelaaltonen6622]

Bolt size for the pedal mount thanks!

[@alllle81]

hello, can you make a video of how to install the wheel stand Pro on the old wheel stand pro ( G29 Version) ? Plenty of use have the old version and we cannot figure out how to mount it.

[@wheelstandpro]

You need 3 additional holes for the wheelbase of the CSL Elite in order to mount it on the G29 stand. You can predrill them yourself or buy a new one after contacting [e-mail] For the CSL Elite pedals you need to use the same pedals fastening plate as for the G29 pedals, howevr you would need an M6x80 Allen Screw + nut + washer and in this way you can mount it all of it on your G29 stand.

[@KevinM0890]

does the wheelstand work with the forces the wheelbase can do? i got my csl elite today and i have massive problems with the pedals. the flipp over wenn im breaking. need somethin to hold it down.

[@wheelstandpro]

Yes :)

[@4658dan]

Hi, are the CSL Elite Pedals LC also supported? I have had a wheel stand pro since 2015 and just want to upgrade to these pedals so hope they fit. Would it be the same as mounting the standard Elite pedals as in this video? Thanks.

[@wheelstandpro]

No, it would be a different one: kzbin.info/www/bejne/Y3ezfXaFj7t1gKc Please see here: www.wheelstandpro.com/products/wheel-stand-pro/gts-plate-upgrade-for-t3pa-pro-and-t500rs?region=1

[@dada_dittrich]

Hello, I think, that I will buy it for my Fanatec pedals with load cell brake. Is it wheel stand stable during the heavy braking, because now I have it with fixing to somewhere, and I cannot rely on it.

[@wheelstandpro]

That depends on what you mean by HEAVE braking, but yes - it is stable.

[@morph200]

Hi guys. What bolts are you using with the pedals? I have your t500 version, but now want to mount the cls elite pedals. Thanks you!

[@wheelstandpro]

It is an M6x80 Allen screw. However you can get the GTS plate which will make them even better to hard-mount: www.wheelstandpro.com/products/wheel-stand-pro/gts-plate-upgrade-for-t3pa-pro-and-t500rs?region=1

[@jaketad939]

Can you mount the Fanatec V3 Inverted pedals on a wheel stand pro?

[@wheelstandpro]

Yes, you can although not with this pedals fastening. For more info please contact [e-mail]

[@oliver-vu1zw]

how does the wheel stand with the FFB of the Fanatec clear (stability)?

[@wheelstandpro]

Fells very good and stable.

[@mateonaranjo333]

Can I use a fanatic wheel on the wheel stand pro made for thrust master tmx pro? I’m on a budget and I don’t want to have to buy a new wheel stand adding an extra 100+ to my budget.

[@wheelstandpro]

Please contact [e-mail] for this query.

[@johnniewalker2415]

Hello, Does this work with The ClubSport Wheel Base V2.5 ?

[@wheelstandpro]

The wheel plate is compatible with the CSP V2.5 wheelbase in connection with the original adapter included with the wheelbase.

[@klaesproduction8520]

I already own wheelstand pro and using it with logitech g923 and i like it. now i'm upgrading and waiting for the new direct drive fanatec csl dd base with csl pedals and i wonder if i will be able to use wheelstand pro with the new fanatec set?

[@wheelstandpro]

Please contact us at [e-mail], thank you!

[@NickBirkettSmith]

Here’s another way to mount CSL Elite LC pedals to a WheelStand Pro. This will be more robust if you have three pedals and are using a loadcell brake, since you need to apply a lot more force. imgur.com/a/chcJeXv imgur.com/a/VOJzyJ4 I made a mounting plate using the template on the Fanatec website and then used four 30mm p-clips and some M6 bolts to attach the plate to the WheelStand. The mounting is very solid, only thing that sometimes moves under heavy braking is my chair! One design change I’d make is to add access holes underneath to connect the USB cable.

[@wheelstandpro]

Nice handywork, however this video shows how to do it without DIY work.

[@chrisperry5244]

Hi mate, can this support the V3 pedals? I've already got one of your excellent wheel stand pro's and I've got the thrustmaster tx100 wheel base and pro pedals but I'm upgrading to a clubsport V2.5 with V3 pedals and I'm hoping it fits ok? Cheers, Chris.

[@wheelstandpro]

No, for the CSP V3 pedals you need a different fastening. Please contact [e-mail] for more info.

[@rc_hugolf1964]

Hello man ! Does it works with the Fanatec CSL Elite 1 Formula 1 (official wheel with licence of Formula one ) ? Thank you ;)

[@wheelstandpro]

The wheelbase of the CSL Elite on the F1 version is still the same, so yes - it will work.

[@rc_hugolf1964]

@@wheelstandpro Cool mate, thanks for your answer ;)

[@paddyredmond3039]

What are the bolt dimensions that you use to fix the pedals to the stand, please.

[@wheelstandpro]

It is an M6x80 Allen Screw

[@paddyredmond3039]

Thanks for your prompt response. Much appreciated.

[@leonasta9809]

Is it possible to mount heusinkveld ultimate pedals?

[@wheelstandpro]

I am sorry but no.

[@Tyson9590]

I dont have these holes in my plate , what can I do ?

[@wheelstandpro]

This is a new wheel plate made especially for the CSL Elite wheelbase. You can predrill the necessary holes yourself. Or you can buy the new wheel plate after contacting [e-mail]

[@advidrunner5104]

How do I get those 2 rubber things off on my fanatec base to mount the plate?.

[@wheelstandpro]

Not really sure what you mean...

[@advidrunner5104]

@@wheelstandpro nevermind. I got it. 👍🏻

[@kappakuras3600]

Llevo varios días queriendo ver el vídeo, se para en el primer minuto, después de la intro, siempre, me he comprado los csl elite y tengo un wheel stand pro V2 y necesito saber cómo montarlo para cuando llegue.

[@wheelstandpro]

We don't know what the problem is - we have checked it and the video doesn't stop at any point.

[@kappakuras3600]

@@wheelstandpro i try to watch with others phone and dont work...

[@wheelstandpro]

@@kappakuras3600 Perhaps there is something wrong with your network or software. The video works just fine.

[@kappakuras3600]

@@wheelstandpro i need a external program to reproduce this video.... I think is problem of KZbin ...

[@wheelstandpro]

@@kappakuras3600 In any case - it isn't our fault, sorry.

[@TonyTorpedo84]

Hi I have the wheelstand pro for my logitech G29 and I was able to mount the pedals well. Now I've bought a Fanatec steering wheel and would like to mount the CSL Elite pedals, but now the actual screw is too short, how long does it have to be to attach the pedals? I would then buy the screw in the hardware store. Many thanks.

[@wheelstandpro]

It would be an M6x80 screw.

[@TonyTorpedo84]

@@wheelstandpro thanks

[@Deevin_RR]

Did the wheelbase fit on the wheel stand pro? My wheelstand pro doesn't have those three Bolt holes for the fanatec wheelbase. I might have to drill them out..

[@TonyTorpedo84]

@@Deevin_RR The screws do not actually fit directly on the wheelbase, but the wheelbase is supplied with an attachment where the holes on the wheelstand fit!

[@TonyTorpedo84]

@@Deevin_RR I bought the Fanatec Wheelbase V 2.5, I hope I could help you

[@chuckystang]

How would you mount the 3rd pedal?????

[@wheelstandpro]

Same way as here in the video, simply use the other holes and spacing.

[@chuckystang]

@@wheelstandpro but what is that center pedal going to rest on? The 2 pedals in the video are resting on the bars... thanks

[@wheelstandpro]

@@chuckystang The pedals are held by 2 screws each to the main board of their construction, not to our stand. It would be stable enough, even if the center pedal would not rest on anything.

[@chuckystang]

Thanks, I watched another one of your videos showing 2 bars being used, one in the front and in the back, that seems to clarify better. Do you sell the two metal bars and hardware separately?

[@wheelstandpro]

@@chuckystang Yes, we do. Please contact [e-mail] for this.

[@chaosgamerhd7407]

How I can make this with 3 Pedals

[@wheelstandpro]

Same way as here in the video, simply use the other holes and spacing.

[@chaosgamerhd7407]

@@wheelstandpro okay thx for the awnser

[@chuckystang]

What would the pedal in the middle rest on though? I see the brake and gas are currently sitting on each pole but the 3rd pedal does not appear to have a place to rest

[@wheelstandpro]

@@chuckystang The pedals are held by 2 screws each to the main board of their construction, not to our stand. It would be stable enough, even if the center pedal would not rest on anything.

[@ediiex8758]

can you send me one for free?

[@wheelstandpro]

Can you believe the answer to this question is pretty much in your head already?